How to Use DJI Phantom 2, Vision + Plus Assistant Software. Calibration, Setup, Change to Naza M

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ธ.ค. 2024

ความคิดเห็น • 361

  • @jlokona
    @jlokona 10 ปีที่แล้ว

    Amazing resource for beginners before 1st flight. Lowers blood pressure and anxiety. Builds mental fitness for maiden flight.

  • @ODHphenos
    @ODHphenos 9 ปีที่แล้ว +1

    It took quite a bit of time for me to get my stick and unit calibrated. This video by far was one of the more easier to follow. I agree that the USB can be finicky, as I cursed and stormed around trying to my units to register on my PC. I think I have it calibrated now. I will look for tutorials on the the controller settings. Im nervous as a hooker in church about flying it for the first time, but I got it use. Thanks for the clear and concise tutorial brother!

  • @dominicchristian8802
    @dominicchristian8802 10 ปีที่แล้ว +1

    I do not have a phantom but it is on my wishlist. This video has to be the most informative that I've found thus far. I've done a lot of research (A LOT) on the P2 Vision Plus. Thank you!!!

  • @cpranger59
    @cpranger59 9 ปีที่แล้ว

    This is a great video, thanks for putting it together. I watched it after receiving my P2V+3.0. One edit I implore you to make in it is, "As long as you are experiencing stable flight, do NOT attempt any IMU calibration." If the flight controller inside your Phantom is not completely level, or you have any type of magnetic interference, your Phantom may never correctly fly again without going through a lot of trouble or sending it back for repair. Thanks very much.

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  9 ปีที่แล้ว

      I hear what your saying. Checking your IMU values is a good idea and should be done on a flat surface away from electrical and magnetic interference. As long as you do this its ok to calibrate as often as you want.

  • @BobAsbury
    @BobAsbury 10 ปีที่แล้ว +1

    This is the best tutorial I have seen on the Phantom / RC Assistant and Naza-M mode.

  • @mssippijim
    @mssippijim 8 ปีที่แล้ว

    One of the best instructional videos I have seen on TH-cam. I had a Phantom 3 Standard for a while but sold it and recently purchased a refurb Phantom 2 to install my own camera / fpv system on. Since the procedures are totally different on the Phantom 3S, this is extremely helpful...thanks!

    • @erwinmilliau4509
      @erwinmilliau4509 ปีที่แล้ว

      Howdy, what kind of app do You use now? And is it for an android? Grt. E.

  • @benstrasser4191
    @benstrasser4191 9 ปีที่แล้ว

    One of the best tutorials on this subject I have found. Very easy to follow and unlike some others, your audio is excellent (no mumbling, thanks). Superb. Thanks for taking your time to do the Tutorial.

  • @akhilthaman
    @akhilthaman 10 ปีที่แล้ว

    I bought this P2+H3-3D from Kellards thru Amazon on June 26, 2014. It also has Hero 3+ Black camera. Yesterday, I added DJI FPV hub, iOSD mini, AVL 58. Every thing works except that: Remote controller is not calibrating X1 correctly. In PhantomRC MAC software, X1 stays towards the center of the range (not moving -1000 to +1000) around -61 to + 320.
    Moving X1 changes camera from straight facing forward to 90 degrees down. Slightest touch on X1 causes camera to move between 0 and 90 degrees, camera does not stop anywhere in between these two extremes.
    Firmware on RC and Phantom 2 for all modules is "latest" according to the Phantom PT2 and PhantomRC.
    I have tried 1) Calibrate Remote in PhontomRC 2) Calibrate again in PT2 software. 3)Also tried gimbal basic and advanced calibration as well. In this order.
    Still X1 is not working correctly.

  • @trailrunner1948
    @trailrunner1948 10 ปีที่แล้ว +1

    Absolutely makes more sense about NAZA mode then the dry instruction manual. Great info. Thanx

  • @LEMIANGEL
    @LEMIANGEL 10 ปีที่แล้ว +1

    I've been looking for this kind of tutorial for a week since I bought my Phantom 2 Vision Plus.
    You are the only one !!!!
    This video is... great!!!!
    Thank you very much>

  • @KKG51
    @KKG51 10 ปีที่แล้ว

    Just wanted to thank you guys publicly for helping me with my unit's tipping over on takeoff problem. To date I've heard NOTHING back from the email I sent to the company's American HQ. I also tried calling them and was disconnected after about 10 minutes on hold. IMHO not a very service friendly company. To recap Marioville Multirotors responded to a question I posed to them via email and I'm not even in the UK!! Thanks again to Ricc.

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  10 ปีที่แล้ว +3

      Thank you for the nice comment. There are a few DJI dealers who are simply box shifters and that have no interest in backup of the products. I'm a family run business established 40 years and we know customer service is key to being around for another 40years.

  • @jamescramer6169
    @jamescramer6169 10 ปีที่แล้ว

    Excellent. You might want to include the necessity of installing drivers or the Assistant will not work. Thanks for publishing all of the info you do.

  • @TheMarkyShow
    @TheMarkyShow 10 ปีที่แล้ว

    It's not very often you see sellers / model shops making videos anymore, well done and very descriptive.. I'll certainly consider buying from you :) Subscribed.

  • @paulclarke7696
    @paulclarke7696 10 ปีที่แล้ว

    Great Video - Wish I had this resource! If you leave the Gimbal lock in place the gimbal will heat up pretty fast.

  • @Zen_Modeling
    @Zen_Modeling 10 ปีที่แล้ว

    This sport has given me some of the best times that I've had in the last several years up against a host of many diseases all very painful and debilitating and I just can't say enough for the entire organization of MMA and UFCA

  • @stefanjannides1227
    @stefanjannides1227 10 ปีที่แล้ว +1

    Update on my previous question - figured it out, just had to unplug from the RC and plug back into the Phantom ...

  • @billinwoodland2245
    @billinwoodland2245 10 ปีที่แล้ว +1

    Brilliant video. have looked at several after receiving my PV2+ and yours is the best! Well done from California!

  • @edgarin
    @edgarin 10 ปีที่แล้ว

    How do you set a data link to a Phatom Vision + to do the ground station flight type?
    Very useful videos mate. Thank you!

  • @Kpavideoproductions
    @Kpavideoproductions 10 ปีที่แล้ว

    thank you so much for this wonderful tutorial. i learnt something easy way watching your video that i did not understand from the manual. i just have a quick question that when i was updating the software my gimbal motor was so hot, is this normal for this. please help..

  • @MrVideoproVivek
    @MrVideoproVivek 10 ปีที่แล้ว

    Hi there! Great video. I had a question. I ordered a refurbished Phantom and just figured out that I received a Phantom 2 Vision Plus - Minus the camera system. So my question is can I modify this unit for other gimbal systems?

  • @ynotgonz1954
    @ynotgonz1954 10 ปีที่แล้ว

    This is indeed very informative and it will help you keep your transmitter and Phantom unit in top flying condition. I do have a question: If I change my video cam into a Go Pro 4, will the wi-fi range extender work on the Go Pro?

  • @jrod1944
    @jrod1944 10 ปีที่แล้ว

    Thanks for an excellent video. I would like to know if It's possible to adjust the return home altitude?

  • @rgstoneinsc
    @rgstoneinsc 10 ปีที่แล้ว

    Great video, thank you.......do you have tutorial on the LED patterns when using Naza mode? I understand that if I change the patterns are different irrespective of IOC switch being off.

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  10 ปีที่แล้ว

      Yes they do change a bit, check the download instructions I'm sure its covered in there.

  • @dmagi15
    @dmagi15 10 ปีที่แล้ว

    This was very helpful. Thank you for doing what DJI didn't do, meaning make a video to explain the calibration process.

  • @stefanjannides1227
    @stefanjannides1227 10 ปีที่แล้ว

    Thanks for a great video. I updated both the RC and Phantom 2 software no problem, all steps went fine until I got to 6.00 where you calibrate the transmitter to the Phantom. My sticks don't respond when I move them so when I click 'Finish' they are all to the right of the slider and black, not green, even though they calibrated fine in the previous step. I only have one USB cable that came with the Phantom and although I have one similar from something else with same size plug it doesn't want to plug in properly, extremely tight ... do you need to have the Phantom and the RC both plugged into the computer during the whole process? When I got to the 2nd stick calibration I unplugged the Phantom (but left on) and plugged in the RC ... could this be the problem? I'm wanting to continue and switch to Naza mode. Can't find any posts on either DJI site or elsewhere that says what to do if sticks not responding. Thanks.

  • @markmahoney6857
    @markmahoney6857 9 ปีที่แล้ว

    Always something new to learn!! Thanks for the video, though I had Naza in place, I did not know how to engage the failsafe mode.
    Thanks again!

  • @psychopathlvc1474
    @psychopathlvc1474 10 ปีที่แล้ว

    There's something I would like to mention here which is pretty important, but seemingly not openly shown on the web. It however seems to be a common problem with people when installing their Phantom software. I had this issue myself and could not find a solution easily. I resolved my issue by chance in the end. That issue was with the WIN Installer software. What I believe you should do is download and install the controller software and the craft software. There are separate programs for the controller and craft, yes. Then what I believe you should do is download the WIN Installer and run it. During installation, it should say something like 'Plug your MC into the PC' What you should do at this moment, is plug in your controller to your computer. If I remember correctly, you can press 'OK' when this message appears and it will continue it's installation. But then you may have the problem I had. I thought I'd mention it here as A) I bought my craft from Marionville Models and B) This video came up as a suggestion via Google when I was searching for a solution to my problem. Hope this helps!

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  10 ปีที่แล้ว

      Thanks for mentioning this. I do cover this in my other videos.

    • @psychopathlvc1474
      @psychopathlvc1474 10 ปีที่แล้ว

      No worries :) You may have even covered it here. I just decided to write that, in case someone was having an issue and frantically searching the web. I know that when I had the issue with mine, I didn't want to watch any videos, lol.

    • @psychopathlvc1474
      @psychopathlvc1474 10 ปีที่แล้ว

      Yes. You have to plug the controller into the PC when it says that :)

  • @BonaireVisionFilms
    @BonaireVisionFilms 9 ปีที่แล้ว

    I did see a check box under the NASAM assistant software, but I don't have the NASAM controller in my PT2 drone and I can't get the NASAM assistant software to connect to my drone?

  • @TheBritishLife
    @TheBritishLife 10 ปีที่แล้ว

    Your videos are so helpful, thank you.
    I wish I had found your shop before buying my Phantom 2 - the optional extras are a good suggestion and even with an extra battery and props in my basket it worked out cheaper than my Phantom 2.
    I will be coming back soon to buy props and a carry case.

  • @DaveFisher1
    @DaveFisher1 10 ปีที่แล้ว +2

    great video! thanks for posting this.
    i bought a P2V+ and after about a half-dozen flights the camera gimbal malfunctioned and now the camera is tilted about 15-20 degrees. the gimbal is functioning but it doesn't maintain the camera perfectly horizontal but rather qat this constant tilt angle.
    i've done the latest firmware and siftware upgrades and still no improvement. needless to say the tilted videos are not good.
    i went on a discussion forum and many others have had this problem. would you have any tips suggestions for fixing this? i'm in mexico so sending it back to the store in NYC where it was purchased is not a great option for me.

    • @npogi9558
      @npogi9558 10 ปีที่แล้ว

      hey so did you get it fix cause i have the sme problem

    • @GFLMMA
      @GFLMMA 10 ปีที่แล้ว

      I am wondering the same thing it just happened today any ideas on how to fix this ?

    • @DaveFisher1
      @DaveFisher1 10 ปีที่แล้ว

      AB JUDAH i found this on a Phantom forum and it worked for me.
      www.phantompilots.com/viewtopic.php?f=27&t=19653

    • @DaveFisher1
      @DaveFisher1 10 ปีที่แล้ว

      GFLMMA check out:
      www.phantompilots.com/viewtopic.php?f=27&t=19653

  • @sverrefossenjr.3695
    @sverrefossenjr.3695 10 ปีที่แล้ว +1

    Great explanation about this Phantom : Great work ! - Not even the factory have made movies like this so THANKS A LOT FOR THIS PAGE :

  • @Macsgrafs
    @Macsgrafs 10 ปีที่แล้ว

    Very informative video, well done. I wonder if you can answer this question for me? I don't have an ipad, iphone or android, no mobile at all, but I have a notebook with bluetooth, will this be ok for live video & cam control?

  • @DRACULARoo
    @DRACULARoo 10 ปีที่แล้ว

    fantastic tutorial, do you know way my wireless sometime its loosing the tempo and gives me a image with 1-2 seconds delay???(I have the last software version!!!)(PHANTOM VISION PLUS)

  • @freddieireland6630
    @freddieireland6630 10 ปีที่แล้ว

    Hi Rick. Great videos by the way. I have just bought a vision 2 + and its seems there is no power to the gimble. Camera hangs limp and the fone app show a red light on the right side of the camera control. Any suggestions apart from sending it back. Everything is calibrated and it flies well, just camera tilted to one side with no gimble control

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  10 ปีที่แล้ว

      Sounds like there is a cable unplugged. Remove the gimbal and check all three grey connectors and fully pushed in.

  • @MoviesSam
    @MoviesSam 10 ปีที่แล้ว

    Just got my Phantom V2+ today. I am going to fly in Naza mode but am curious about a couple things. Do you still use the S1 switch 5x to get into calibration mode. I know that when in Naza the S1 has other functions. and 2.) In Naza mode with both S1 and S2 all the way up - does the unit behave just like in Phantom mode (GPS mode) ?

  • @texasdave2020
    @texasdave2020 10 ปีที่แล้ว

    This is very good information and well presented. You may want to share this video with the phantom pilots forum as well. I am sure many members there will find it useful too.

  • @cooncil9413
    @cooncil9413 10 ปีที่แล้ว

    Rick. Genius.........thanks for the videos. VERY helpful. Am a fellow Scot out here in the US and flying the newest vision plus. Loving it.
    Question: With your help, managed to switch to Nazza mode, had a great flight. Switched back to GPS mode to land, rear LED lights went back to green, looked good.
    Anyway, it's pretty tight where I take off and land from. Wasn't paying too much attention as it was in GPS mode and the copter just kinda drifted, hit a wall and a totally fooked a few props. My mistake I know because I could've corrected it ?
    .......but is there anything I can do to 'tighten up' how it flies in GPS mode ?

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  10 ปีที่แล้ว

      Not so good with the crash. Sometimes the satellites can drop out and cause drifting. Always worth checking the Solar forecast as the can cause GPS dropout.

  • @jollybus77
    @jollybus77 10 ปีที่แล้ว

    Great video. Do you always have to do the calibrations when you get a new phantom.

  • @RainerHinck
    @RainerHinck 10 ปีที่แล้ว

    Thanks for creating this great video. One question to the failsafe / coming home: the copter goes up to 20m or goes up +20m from the point where it looses contact? If it looses contact at a altitude of 80 m, will it go DOWN by 60m...?

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  10 ปีที่แล้ว

      It will go home first at the higher altitude then descend at the home point.

    • @FlushVision
      @FlushVision 9 ปีที่แล้ว

      If control signal is lost below 20m it will rise to 20m then fly to above your home point, wait for about 15 seconds then descend. If control signal is lost above 20m it will stay at whatever altitude it was at when it lost the signal as it flies to above your home point, wait for about 15 seconds then descend. However, I recommend that you alter the fly home altitude. You can do that using the assistant software . I recommend a height of at least 35m.

  • @mikelainguk
    @mikelainguk 10 ปีที่แล้ว

    Great video. I have one question for now. The CE and FCC switch changed the range dramatically. Other than legislation is there any reason you can't run on the FCC mode in the UK to give you the extra range?

  • @ErikEggum
    @ErikEggum 10 ปีที่แล้ว +1

    Hi. I enjoy your videos, and use them for training :) On my vision2+ I have gotten the camera out of aligment. It is not level when the phantom is level. Is there any calibration procedure for setting the aligment ? Thanks.

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  10 ปีที่แล้ว

      There is no adjustment for the horizontal on the gimbal but what your an try is, get a compass and find north, point your phantom in the north direction and turn on this sometimes works.

    • @BestFitSquareChannel
      @BestFitSquareChannel 10 ปีที่แล้ว

      hello Erik,
      perhaps you can help.
      I'm considering purchasing PV2+…
      doing research to better understand pitfalls…
      seems you've experienced a dandy…
      how did the camera misalignment happen?
      were you able to remedy situation?
      how has this impacted your PV2+ experience?
      thank you.
      best wishes,
      Manuel

    • @ErikEggum
      @ErikEggum 10 ปีที่แล้ว +1

      Hi. Its a greate product, but it the gimbal is not as top as the rest. There is a common problem for the gimbal to be out of alignment. A simple calbration possibility in the software would have solved it, buit it is not there. The only solution to day is to buy a 700 $ replacement camera and gimbal if you do not want to open the unit yourselves.

  • @RBXXXX
    @RBXXXX 10 ปีที่แล้ว

    thx for video I just bought the Plus and have read some pilots have not done this and lose control and which what they think is failsafe but is actually manual mode and have crashed on there first flight. So I did not want to make that same mistake even i'm an season pilot a little rusty but will use the Phantom Plus for video and photos only and use my Naza F450 for sports flying the F450 frame is more durable and not easily broken. Once again thanks for the information

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  10 ปีที่แล้ว

      You are correct. Technically they should fly from the box but ideally need to be calibrated and firmware updated before first flight.

    • @RBXXXX
      @RBXXXX 10 ปีที่แล้ว

      If you are new, look for vides like yours or others because if crash the of the Phantom is not made to handle medium recks(falling 10' on sidewalk crashes) like the Naza flamewheel is. So in my opinion do your home work and alway intialize failsafe because if you lose sight or control a flip of the switch can save buyers a lot of money

  • @meibing4912
    @meibing4912 10 ปีที่แล้ว

    Great video instruction - If I lived in the UK I would buy from you!

  • @kipche14
    @kipche14 10 ปีที่แล้ว

    Thanks for the video. You plugged in the phantom to the computer, but then left the micro USB cable from the controller unconnected?? Where do you connect the controller to?

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  10 ปีที่แล้ว

      You don't need to connect the controller by a USB cable as it's connected by remote controller.

  • @gneric88
    @gneric88 7 ปีที่แล้ว

    hello Need some advice I own a DJI phantom 2 Vision Plus drone but no able to use the Ground station app in DJI Vision apps using my Iphone I do th compass calibration but the problem is my Present location on the Map not seem correct position it been offset a little far from my present location I set my Dynamic Home point enable but still the present location is offset far to my present location ,what seem to be the problem i do not know may you can give me some advice how to do with this

  • @BonaireVisionFilms
    @BonaireVisionFilms 9 ปีที่แล้ว

    this is under the main tap view window of the assistant PT2 software.
    You see on the right a list with items with one item GIMBAL Switch and on mine it reads off?
    Is there a way to see if the gimbal functions corectly with-out having to power on the drone?

  • @jman4america703
    @jman4america703 10 ปีที่แล้ว

    Bloody Good Video! Wish DJI would offer this to its customers!
    BIG THANKS FOR YOUR ASSISTANCE FROM TEXAS, USA!

  • @Rebelvis32
    @Rebelvis32 10 ปีที่แล้ว

    Really nice tutorial! Thank you so much for clearly walking us through the software and programming. Made things much easier and more understandable.

  • @robniemela3272
    @robniemela3272 10 ปีที่แล้ว

    This was the information that I was looking for....Perfect

  • @Echo07usmc
    @Echo07usmc 10 ปีที่แล้ว

    Good morning. First of all, excellent videos, very informative & useful. However, my issue is cannot seem to pair my smart phone with the range extender & drone. I can see it when my phone scans for WiFi but it will not connect. Please help...!

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  10 ปีที่แล้ว

      What kind of smart phone do you have and what happens when you try to pair it?

    • @Echo07usmc
      @Echo07usmc 10 ปีที่แล้ว

      Marionville Multirotors
      I have a Samsung Galaxy Note 2 w/AT&T.
      When I attempt to pair it I can see the Range Extender as my phone scans for WiFi signals but when I select Phantom_xxxx on my phone, it tries to obtain the ip address & link to it but then drops it & says the signal is too weak.

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  10 ปีที่แล้ว

      Not an issue I've had, have you tried an apple device to check if its the same.

  • @Bob405405
    @Bob405405 10 ปีที่แล้ว

    Do you know or have you hear about the Vision Plus having difficulty obtaining GPS/Satellites? I received mine a week ago and I am having a great deal of trouble establishing more than 4 or 5 Sats. I may get 6 or 7 but they quickly disappear, going back to 4.
    I also have a Vision 2, and have had NO problems grabing Satellites.
    Is there a correction for this issue eith the PLUS?
    Thank you

  • @ajmalthanseen
    @ajmalthanseen 10 ปีที่แล้ว

    Best tutorial ever! Please do more about flying tips and more! :)

  • @adamb.chertok5286
    @adamb.chertok5286 10 ปีที่แล้ว +1

    just opened up my vision plus and started to calibrate following this video. when I get to the imu calibration, does the remote control need to be on? for some reason the "basic cal" and "check imu status" buttons are greyed out, and the imu status says "idle". any ideas? the advanced calibration seems to have failed on the first run. trying again now...

    • @fatherandsonflying5871
      @fatherandsonflying5871 10 ปีที่แล้ว

      Yes, it's always good to turn on the Tx before turning on the craft. Also, are your values within range? Hover over the little question mark to see.

    • @n666fst
      @n666fst 10 ปีที่แล้ว

      Adam B. Chertok I am having the exact same problem...did you manage to resolve this?? If you did would you be kind enough to share, I would really appreciate it...thank you.

  • @larryregan5323
    @larryregan5323 8 ปีที่แล้ว

    I have a phantom 2 model P330Z with a Zenmuse H3-3D Gimbal and DJI model DJ6 controller. I am unable to fire up, when I press the battery button, I get the 4 grene lights, and hold the second push, the lights just stay green for a few seconds. I have tried to connect to the software, plug in the micro usb, and I hear a sound on my computer, but that is it, red or blue light on the software don't light up....

  • @andykatrien1
    @andykatrien1 10 ปีที่แล้ว

    Hello, I have a Phantom 2 plus vision.
    I'm from Belgium and I have a question.
    Can I put the camera from NTSC to PAL?
    Thank you.

  • @axebeard7677
    @axebeard7677 10 ปีที่แล้ว

    Thanks a lot buddy. You answered a lot of my questions in 15 mins!

  • @pgacituapg6363
    @pgacituapg6363 10 ปีที่แล้ว

    muchas gracias por compartir este tutorial, saludos desde Chile

  • @douglasfaulmann3740
    @douglasfaulmann3740 10 ปีที่แล้ว

    Thanks for the response. That makes sense. Is there a way to get my camera to point straight down though? I can't remember if this is the way it came straight out of the box or if it got this way because I left the gimbal guard on briefly after I turned it on. Any other suggestions?

  • @craigwoollam8984
    @craigwoollam8984 10 ปีที่แล้ว +1

    Great video. Well done.

  • @oscarcolapinto2342
    @oscarcolapinto2342 9 ปีที่แล้ว

    have you the setup of this version on assistant software yet? i'm looking for it!

  • @curtwyman
    @curtwyman 9 ปีที่แล้ว

    What is the "unused" (Silver) connector that is on the Range Extender?

  • @fabiopfontes
    @fabiopfontes 9 ปีที่แล้ว

    Fello, thanks for you video, It helped me a lot with the set up of my new DJI Pahntom vision 2 plus. However I have a question. I got an extra battery for my drone, one turno on as per normal but the second one once I put the sticks down the LED light flashes 4 times red light and it doesn't turn it on at all. What it could be?

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  9 ปีที่แล้ว

      If you push and hold for five seconds the on button on the battery it will check the battery. You should get four green lights.

    • @fabiopfontes
      @fabiopfontes 9 ปีที่แล้ว

      Ok, I will try. Thanks for the tip Marionville

  • @uuknowit
    @uuknowit 10 ปีที่แล้ว

    Wondered if you could assist me, been having heck of a time getting help with DJI customer service. I've got the Phantom2 Vision Plus, everything is working great, except....! I'm able to calibrate rc unit in the RC System installer, v1.1 with no issues. When i go over to the Phantom2 v3.0 i've got issues. I've got my rc connected with usb cable, same as in v1.1, but no matter where i've gone to and clicked on or how many times i've re-uploaded the software, i keep getting same message "please connect controller". I've tried loading the v2.00 first, then gone back again, I've googled it and whatnot, but i seem to be the only one having this problem, so i feel i'm doing something blatantly wrong and just not seeing it. Any help would be much appreciated!!! Great video!

  • @trickysyoutube
    @trickysyoutube 10 ปีที่แล้ว

    re when advanced re cal , if you dont wait for the ( wait too hot ) it will not complete the cycle .... turn off .. wait 15 mins .. then recal the compass this worked for me .... took me all frigging day to work this out ..

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  10 ปีที่แล้ว

      It will always say its to hot when in advanced calibration but click yes and proceed as normal.

  • @BonaireVisionFilms
    @BonaireVisionFilms 9 ปีที่แล้ว

    I manually calibrated the transmitter with-out using the assistant software.
    My assistant software does indicate now that my Gimbal switch is ON so that is a step in the good direction.
    When I do the full start up procedure the gimbal does respond to my gimbal control dial but every second it jump left to right and the camera keeps pointing downward.
    I'm just trying to determine if I need a new gimbal.
    Is there a way for me to test the gimbal without having it connected to the phantom?

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  9 ปีที่แล้ว

      Make sure you have calibrated the controller in the RC Assistant software first and then again with them Phantom connected to your PC, recalibrate the controller again. Make sure you calibrate to X1 channel ( roller wheel for gimbal)

  • @Briandmchale1
    @Briandmchale1 10 ปีที่แล้ว

    Hi, my phantom vision plus will not complete the advanced calibration, it has never been crashed but on Saturday when I hooked it up to my pc it asked me to advance calibre. It used up two full batteries but is still not complete. I am now afraid to fly it incase of a flyaway. It wil start up as normal and gives normal flashing green gps lock lights. Is it safe to fly?
    Cheers, Brian

  • @VincyLimPro
    @VincyLimPro 9 ปีที่แล้ว

    Great tutorial. Thanks for taking the time to do this. Greatly appreciated

  • @7aMoODaiZER
    @7aMoODaiZER 10 ปีที่แล้ว

    how can i re-calibrate the gimbal is kind of low from the right side

  • @HeyMrBJ
    @HeyMrBJ 9 ปีที่แล้ว

    You're the Man. Best Video Yet. Preciate your help!

  • @jackpiccinini9541
    @jackpiccinini9541 10 ปีที่แล้ว +1

    I down loaded the RC software 1.1. I do not have the stick mode and compliance mode option?? Only the stick mode1 far left mode 2 far right. Do I have the latest software?

  • @pknockslifestyle
    @pknockslifestyle 9 ปีที่แล้ว +1

    Marionville Multirotors I downloaded assistance software for phantom vision plus v3 and the computer will not read the connection. I uninstall the software and reinstall and it still won't connect please help

  • @mariuskristensen813
    @mariuskristensen813 10 ปีที่แล้ว

    Is this somtingh you most
    doo when its new from the box

  • @philwilson9215
    @philwilson9215 10 ปีที่แล้ว

    this video is great, i do have one question regarding the gimbal switch on the top left side of the transmitter that is like a wheel. can you use this on phantom mode or does it have to be on naza mode? i have tried to use it so i can get a birds eye view of below but cannot seem to get it working....any tips on how to fix?

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  10 ปีที่แล้ว

      Yes you can use that on Phantom mode.

    • @philwilson9215
      @philwilson9215 10 ปีที่แล้ว

      Marionville Multirotors thanks for the reply...i cannot seem to get it working, when the drone is in the air and i tap or the up or down arrow on the left side of the screen on my phone it will not move or on the transmitter on the left side with the silver wheel will not move either....any idea what i am doing wrong?

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  10 ปีที่แล้ว

      On the Phantom Assistant make your you have selected the Upgrade controller button under Basic, Rc tabs. The assistant features in this video is the older version and not featured.

  • @pooley56
    @pooley56 9 ปีที่แล้ว

    HELP! Im going away tomorrow and i flew my Phantom 2 yesterday and almost had a fly away. I need to connect it to my PC but i have tried everything i have all of the programs i have the drivers ive unistalled and reinstalled everything many times but nothing. When i plug is it it recognises theres a connection but say unknown connection. thanks

  • @claudioleo3806
    @claudioleo3806 7 ปีที่แล้ว

    Hi do you recommend any other camera Gimble ( cheap + good ones) ?

  • @dannydaw59
    @dannydaw59 10 ปีที่แล้ว

    When I connect either my phantom 2 vision plus or the controller I get an error beep. The software version is the same as in the video. I've tried connecting when both on and off. It does the lower pitch "beep beep beep" noise. I've even tried different USB cords to no avail.

  • @martywalsh6559
    @martywalsh6559 9 ปีที่แล้ว

    very interesting. where do you get the dji program for your pc? should I have got a disk with it?

  • @stevewalker5645
    @stevewalker5645 10 ปีที่แล้ว

    I am considering switching to Naza m mode on my new phantom vision. I did that on my phantom fc 40 with no problem. However, I want to know if Naza m will affect the vision app or the ground station performance? I do like home lock and course lock modes. Thank you.
    Steve Walker Indianapolis,Indiana

  • @buildingjmpr67
    @buildingjmpr67 7 ปีที่แล้ว

    always looking for decent price on a gimble for my Phantom 2v 2.0- wired for zenmuse gimble presently.

  • @ericfromrichmond
    @ericfromrichmond 9 ปีที่แล้ว

    Very informative and easy to follow video! Thanks for the assistance

  • @henryadavis
    @henryadavis 10 ปีที่แล้ว

    Please Help! When creating a video with my Phantom2 Vision + the video does not always work when I go to view it. Sometimes it plays and other times the media player gives me an error and says it cannot read the file. What do I need to do to have a viewable video each time? Thanks

  • @douglasfaulmann3740
    @douglasfaulmann3740 10 ปีที่แล้ว

    Hi. This video helped me immensely. I have a bit of a problem though. On my 2+ It looks like my cameral/gimbal doesn't go exactly 90degrees down or 90degrees horizontal. It stops just a little before pointing straight down. This isn't a huge problem but I use it for mapping archaeoligical sites and it's important to be straight down. Can you adjust this in Assistant? I found that if you open assistant without connecting the phantom, there is a tab for Gimbal in Advanced, but when I plug in the phantom this option disappears. Why? Am I doing something wrong?

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  10 ปีที่แล้ว

      The Phantom 2 and Vision + use the same assistant but when you plug in your Phantom features specific to your model will appear or disappear. The gimbal features are for the ZenmusevH3-3D

  • @MrCpmboy
    @MrCpmboy 9 ปีที่แล้ว

    just got mine (v3) a couples days ago, haven't setting it up yet. One question, why changing to Naza M?...

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  9 ปีที่แล้ว

      Changing to Naza will give you more advanced flight features such at ATT and course lock.

  • @jakenackos
    @jakenackos 10 ปีที่แล้ว

    Does anyone know why I cannot communicate with my P2V+ on my Mac? I have downloaded the assistant installer and also RC installer. I was able to calibrate my controller, but I cannot seem to access the actual Phantom. I notice from other comments that windows has some sort of driver installer to assist you, but all MAC has is the RC assistant and vision plus assistant. Anyone run into this?

  • @dandanthegadgetman
    @dandanthegadgetman 10 ปีที่แล้ว

    Very Very well done nicely explained clear and concise .. I understand a lot more now Thank You

  • @nwdiver33
    @nwdiver33 9 ปีที่แล้ว

    Excellent tutorial! Thanks

  • @susanocerrudo2592
    @susanocerrudo2592 9 ปีที่แล้ว +2

    Thank you for info ,highly recommended..

  • @SCpalmetto00
    @SCpalmetto00 10 ปีที่แล้ว

    Thank you this was really helpful for setting up my Phantom.

  • @Thejasonthomasshow
    @Thejasonthomasshow 10 ปีที่แล้ว

    Thank you for the help. Very simple and handy video

  • @markcassar
    @markcassar 10 ปีที่แล้ว

    hi. can i stick my gopro to the Phantom camera to get great quailty GoPro video together with still photos from the Phantom camera? Will that extra weight affect the gimbal or Phantom?

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  10 ปีที่แล้ว

      You can't add any weight to the gimbal but you could mount it to the phantom it's self.

    • @markcassar
      @markcassar 10 ปีที่แล้ว

      yeah :) perfect. thanks

  • @pknockslifestyle
    @pknockslifestyle 9 ปีที่แล้ว

    I've purchased a new dji phantom vision 2. I've turned the quad on and heard the first beeps, but in other videos I've heard quad beep 4 to 5 short beeps after. Is that recommend? Do you think something is wrong with quad?. I've plug quad into my computer using the software but the quad did not pick up. I power on and off even reinstall software. Do you think something is wrong with quad? Help please

  • @BonaireVisionFilms
    @BonaireVisionFilms 9 ปีที่แล้ว

    Why can't I find the {turn on check box of the gimbal}
    I'm on the V3.8 latest version of assistant software and I'm looking at the main view page, or on the

  • @markhaggis7462
    @markhaggis7462 10 ปีที่แล้ว

    Hi Rick, Do you have to fly your phantom in compliance mode CE or can you use FCC in England. I only ask as you get a better range on FCC.

  • @CJbrinkman602
    @CJbrinkman602 9 ปีที่แล้ว

    Were did you get the drone from?

  • @johnk12345100
    @johnk12345100 9 ปีที่แล้ว

    Great video but my assistant screen on compass calibration is greyed out and stays in idle Staus, so my check imu status and my basic cali button are grey. Here are the conditions, i have drone powered on, controller powered on, i have calibrated compass, connected wifi with drone, Indoor though, Is because indoors? cannot get it to switch to ready, stays in idle, and my boxes are not in the range that you recommend, i do not want a fly away. It does not look like you are out doors....i have updated all firmware. completely stumped.

    • @MarionvillemodelsMultirotors
      @MarionvillemodelsMultirotors  9 ปีที่แล้ว

      You can do all your IMU calibrations indoors no problem. Usually when the calibration buttons are greyed out its because the IMU is still warming up but they should be clickable after 30 seconds or so.

    • @johnk12345100
      @johnk12345100 9 ปีที่แล้ว

      After I took out and flew the drone, I came back and hooked it up again, and it was there, they were not greyed out, I was still not over 1500 but more like 1439 at the end, but the drone flew flawlessly! On a completely different note, the new dial on the upgraded 3. O remote control was not working when I was flying the drone , and used it to try to control the camera it cause the camera to be very unstable, hard to explain but it was not acting right. not sure if you want to do another video on calibrating the upgraded controller, but i just for the heck of it after moving the main sticks in circles moved the silver controller for the camera up and down during calibration. Voila,now it works perfect when I'm flying, in fact it works perfect while I was just sitting at my desk , so bottom line not only do the main sticks have to be calibrated so does that silver dial. Thanks for your reply!

  • @gerwynmorgan6971
    @gerwynmorgan6971 9 ปีที่แล้ว

    HI,
    I wonder if you could help?I have a Phantom2 Vision+, for the last few flights, I have noticed that when in hoover, it seem to be tilting to one side, slightly off being level? Any ideas please?
    Thanks for your help.

  • @gianpieroguzzo4617
    @gianpieroguzzo4617 10 ปีที่แล้ว

    Muy buen dia donde pueeo descargar este software de calibracion de control remoto

  • @nicolettalandsurveyors5095
    @nicolettalandsurveyors5095 9 ปีที่แล้ว

    I DID NOT experience any of the possible scenarios you spoke of in your HARD RESET video. No power failure during upgrade, no USB cable removal, no power failure in the computer. Are there any other less dangerous ways to go about this? I haven't even flown this thing yet.

  • @xphilclarkx
    @xphilclarkx 10 ปีที่แล้ว

    This message is for father and son flying. I'm using iphone to reply and I does not give me the option to reply direct to your message. Yes I am turning it on, I've tried having it on before I launch the application which didn't work, I've tried turn it on after I launch the assistant which didn't work. I've also tried having every thing powered up including the app on my iphone in camera mode then when I connect it to my laptop the camera on my iphone goes black and a message comes up says USB to pc . This still didn't work. My controller connect to the ex assistant . Any ideas would be great thanks

  • @djordjecoric
    @djordjecoric 4 ปีที่แล้ว

    where i can download assitant for controler?