How to fix peeling ceiling paint - DIY
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- This is step by step how to fix peeling bubbled and flaking paint on a ceiling or wall. This is a very common problem and is usually caused by poor ventilation in the bathroom. I will show you how to do it yourself and save some money. This is an easy diy task that anyone can do particularly now that you have a tutorial on how to do it. For more DIY and how to videos LIKE COMMENT and SUBSCRIBE
Amazon product links:
7 in 1 scraper - amzn.to/3PrdJ1x
120 git sand paper - amzn.to/3F6jCg5
Hand sander - amzn.to/3t2CppI
Joint compound - amzn.to/3LvBQLk
Joint knife - amzn.to/45WkZcM
Primer in a spray can - amzn.to/48nCAMo
Your donations help me to keep helping you .....
www.paypal.com...
#DIY #howto #billshowto
So is the following step correct:
1. Remove old paint by scraping
2. Paint with Prime and Sealer
3. Patch and blend
4. Sand
5. Prime and seal again
6. Paint 1 coat
7. Paint 2nd Coat
I did not see you prime again after sanding, just curious. Thanks!
?
I LIKE Bills videos as he knows the ins and outs of a variety of trades.
I redid my bathroom feeling as had peeling paint (not as bad as yours) I used a range of zinsser products pealstop, fine toutpret for patching, bullseye 123 over whole surface and finally 2 coats of permawhite satin. Good result so far!
Fixing a peeling/flaking ceiling 100% my least favourite job! Thanks for the tips:)
Me too 👍👍👍
Great work as always Bill. Clear, concise, and conscientious. Many thanks 👍🏻
You’re welcome 👍
Bill can you give paint maker and name thanks
Top job mate , it’s look like brand new thanks bill 👍
👍👍👍
Learnt heaps from your earlier video around patching a flaking ceiling. This is a great video 👍🏼
👍👍👍
how when he literally tells people you can just paint over a mold invested wall?!
What a great transformation. Like a brand new ceiling. Brilliant video. Thanks Bill.
You’re welcome 👍👍
Awesome video on a topic no one covers, thank you so much!
Great video Bill I only have a small amount of peeling on the cornice to fix, would you recommend painting the whole ceiling with the aquablock and then top coating again?
Fantastic job Bill!
👍👍👍
Nice video but did noticed you never told in your videos what compound or product you use to patch and blend to balance the surface? it will be good if you let us know?
All purpose joint compound from csr👍
Top job. 😊👍👍👏👏
👍👍👍
So nice not to have to deal with texture repair in these situations D:
Great job Bill, I will try it tomorrow with my wall😊
Hi Bill. What compound did you use to patch the ceiling?
I would like to know this as well.
I think it was all purpose joint compound by csr (i think he said this is what he used in response to another person who asked same question )
Good Job if this ceiling would have had that aqua coat used from previous decorator I don't think this peeling would have happened even without exhaust fan.
Hi. Nice job. What product did you patch it with?
100% better many thanks for the video👍👍
👍👍👍
Nice video Bill, can we use zinsser stain blocker in the bathroom or the product you used it’s better?👍👍👍
The product I used has so many properties sealer, binder, stain blocker, primer and creates a waterproof barrier . Really hard to beat for this type of application as you can’t go wrong 👍👍👍
Awesome video Bill,love your work,great job mate.
Glad you enjoyed the video 👍👍👍
Excellent vid Billy. Will that binder also help with plaster? I made a repair in my bathroom a few months ago and the feathered edges of the plaster is peeling off now and I don't know why. Thanks mate
Great video with detailed explanation!!
Hey Bill. Great tutorial on a very common problem. I’ve always used Zinsser BIN in this scenario but based on your video I’d be willing to give the Crommelin Aquablock a go. I did note, though that their doco recommends using their slate sealer on unprimed plasterboard. Have you found Aquablock works fine without this additional step?
Thanks in advance.
Zinsser bin is an awesome product however for this job I would recommend a product like crommelin aqua block. It’s an all in one product which is a sealer, primer, binder, blocks stains and creates a water proof barrier. Perfect for a job like this 👍👍👍
I have some pop corn ceilings that are peeling in some spots. What would you suggest for that? I've heard from a local handy man he can put sheet rock over it as an easy fix.
Great work Bill. I need your help with rid of the patch on the ceiling when I have applied the filler. I have used the white paint on the ceiling with the roller but it did not help to get rid of the patch as I can still see it. Do you know how I can get rid it?
Let it dry and scuff the edges with fine sandpaper and dust. Coat it again and keep doing it until it looks smooth and same colour. Watch you carefully sand the edges each time. Good luck!
Great video. Thanks. A quick que please.. After all the prep work is done and you said you would prime and then paint. Well my question is, can you use watered down paint as a primer and then go over with the paint for the second and then final coat? Or does an actual primer have to be used? Thanks kindly
Thank you. Will give it a go
What kind of paint to use in the kitchen? Water or oil based paint?
The finished ceiling looks like it has texture in it. What did you use to get the uniform texturing throughout the ceiling? I've got a sprayed ceiling I'm repairing right now, and getting uniform texture across the sanded and repaired spots is proving to be very difficult.
Thanks mate... wonderful video! just a question.Is this product enough for everything or should we buy another paint as well?
Hi! Will crommelin aquablock work to seal plasterboard that's peeled off the top paper exposing the brown paper? I have seen alot of videos from America where they use a shellac sealer, will this work the same? Thanks 🙏
Always doing a great job Bill, Love your stuff 👍
👍👍👍👍👍
Thakns Bill - Could you not have just sanded/feathered the edges of the old paint to blend it in instead of using filler or would that not look right?
I wish, unfortunately you will see the edges if you dont patch it 👍👍👍
I definitely agree with Bill. I tried that method first and that's why I was searching for videos on how to do it right!
Thankyou Bill!
I am wondering how long did it take you from start to finish?
Great video bud. I have a question regarding the light fixture . Did you caulk around the light fixture? Recently I've had a problem with little spiders getting in my kitchen light fixture.. not sure what to do about it .
Nice job.
What if most of the paint is super hard to get off? Is there a way to make it any easier?
How come the cornices weren’t flakey ? And also would it not be easier to simply put a new sheet of plasterboard over the top of the existing one ?
Was that an electric sander you used or did you do it manually?. Good job 😊.
Manual pole sander
Hi Bill
Do you use a semi gloss on ceilings in wet areas??
Hi, no I still use a flat paint on ceilings. In bathrooms, kitchen and laundry try and use a paint which inhibits mold 👍
Do you have a video on how to install an exhaust fan in bathroom? Unfortunately our house is old & doesn’t come with one built in
Got a very similar bathroom to fix but I’ve got to ask if you know of an equivalent primer available in America?
First thought within seconds ah an Aussie. Yay!
👍👍👍
So I started peeling the paint on my bathroom.ceiling thinking it would all just peel off. I peeled off bif pieces but no, it didn't all come off like that
For two months I left it there wondering how to patch it and what to do. Until I saw this video! With the patching what brand filler do you use? I bought sellys Spakfilla is that ok or do I need another trip to Bunnings. Still scared to try as I haven't done a lot of patching but I can't leave it like that any longer.
I wouldn’t recommend selleys filler for this. You can use an all purpose joint compound from csr, much better 👍👍👍
@Billshowto Thank you so much for the video. I didn't know what to do. ok CSR. Giving it ago. Thank you!
Thats the difference between a pro doing this and someone like me doing it lol
I only scraped a small section of where it was pealing then added acrylic sealer to the small area. Then painted the rest without patching or sanding .
Mine is knowhere near as nice as yours. Shouldve watched your vid first lol
Hi Bill, I've had some plaster work / square setting where lengths of metal angle have been used on the corners. I can see thru the plaster to the metal and am thinking of using Zinsser Cover Stain an oil based primer / undercoat to avoid the metal rusting, what would you do please.
Hi, the bead should be covered with compound to the extent that you can no longer see the metal. Make sure it’s completely imbedded then you won’t have to worry about an corner bead rusting. Only time it may rust is when it’s exposed to the elements in which case a plastic bead should be used 👍👍👍
Good job
Would you have any advice on how to fix skirting boards that have moved away from the wall? It’s a old house and there are slight gaps
Good work
Hi Bill! What can I use in the States other than the Crommelin Aquablock? What brand is comparable? Thanks
Peel stop from zinsser 👍
And exterior is the same?
Hi Bill, after the steps of applying the compound and then sanding do I just paint straight over with 2 coats of the final paint or do I have to prime the compound with a mist coat before applying the final coats?
Going to travel a long distance to my elderly parents to do there's so I'm just trying to make sure I get it right first time... any advice is appreciated and great videos 👏👏
Hi, it’s always best to prime the area before new paint is applied. You can buy an all in one paint and prime products which make life easier 👍
@@billshowto thanks so much for the advice 🙏 keep up the great work, TH-cam could do with more helpfull people like you 🤝
Leaving that light fitting on was driving me nuts 😅
Dope ❤
How about a pealing popcorn ceiling, same process?
Not very common here in Australia 👍👍👍
@@billshowto is that a yes or no?
Honestly don’t know much about popcorn application so I can’t tell you.
@@billshowto thanks
@@billshowto I think he might mean "rough cast" coated ceiling.
👍👍👍
👍👍👍
Not a fan having enormous window in the bathroom or toilet. A small overhead opening would have been sufficient.
Protective goggles and face mask. Some of that paint contains lead.
I hope they change that shitty light.I have better lights in my garage.
Lol 👍
Standard lights for cheaper rentals
Get real ...do it right !!!!
Gees, at least open the window and you can still close the blinds
Legend