Looking to start a Street Bob video build series in the near future. Thanks to this video, I think I just found my risers. Thanks for brining OG Moto to my attention.
I’ve got a Tbar setup at about 12.5 inches of height on my FXLRS. I’m 5’6 and the height is fine, however I would love to have some pullback, stronger considering these risers.
Great review! I have all the parts and ready to install on my 2020 street bob. Did you do an install video? Do you need to de-pin and of the wiring? The Moto bars look like they will pass right through. Thanks! Mike.
Tony- awesome content! I just received my OG risers and ODI handlebars and I’m about to install. Question: Do I need to disconnect the battery during installation?
Hey Tony we need to meet up for a ride. I am open most of the time so just let me know. Total miles is 81 miles from Milan Indiana to Louisville. About Half way is Madison Indiana. Just let me know what you think?
@barrybarnes96 all good guys. Been involved in The Five Dirty Bikers Podcast. Which takes a lot of my free time. You all can check us out we are available on all podcast sites and drop new ones every Monday.
All good guys thanks for asking. I have been doing The Five Dirty Bikers Podcast. Which takes up most of my free time. Check us out we drop a new podcast every Monday. It's a lot of fun and not for kids😂🤣.
Hello, I am the manufacturer of LED headlights and like your video. I really want to have a cooperation with you. I have sent you the message via Instagram. Looking forward to your reply.
Looking to start a Street Bob video build series in the near future. Thanks to this video, I think I just found my risers. Thanks for brining OG Moto to my attention.
This is an awesome video. This is exactly what I was looking for. There are very few options for keeping things this clean looking. Thanks! 🤘🏽
Looking at same set up, would love to see an install video. Thanks for posting.
I just ordered myself a set for my incoming FXBBS 2021. Thank you for the discount code.
Best Regards Daniel from Sweden
👊👊👊
God damn those look badass! The quality is impressive!
i bought these a few months ago. they are the best!!!!!!!! Great choice!!!!! OG all the way!!!! I have the mini floorboards coming this monday.
Quality stuff👊👊
Found your channel from 5 dirty bikers love all you guys do!
Thanks man👊👊👊
They look great 👍🏻
I’ve got a Tbar setup at about 12.5 inches of height on my FXLRS. I’m 5’6 and the height is fine, however I would love to have some pullback, stronger considering these risers.
Awesome brother.
They look so good perfect fit 👍🏻🇦🇺
👊👊
Just ordered from OG Garage Moto. Thank you for the video and the discount code.
Great stuff👊👊👊👊
@@TonysGarage Tony, what riser bushing do you have?
looks great
This was awesome video there’s not a lot on streetbobs.
Hey Tony, more looks of the bike from a bit further away would be great, cheers!
👊👊. I got you
Hey neighbor, you’re gonna have a totally new bike before this is over!
Love the channel Tony been following your lead for a while! Veteran Biker here
Thanks man👊👊. Really appreciate that thanks for watching.
@@TonysGarage appreciate any feedback you may have for my channel
Great review! I have all the parts and ready to install on my 2020 street bob. Did you do an install video? Do you need to de-pin and of the wiring? The Moto bars look like they will pass right through. Thanks! Mike.
T bars are for teabagger baggers. Good video Mr. Cox. 🤣
That are risers and moto bars not T bars🤣😂. It’s just a shame their not on a Dyna.
With the 8.5 did you have to extend wires and cables?
can you take a few pics of your bike with these bars and risers without that bag in the way? from a few different angles ...thank you sir
Wish I could have seen more of the bars while in use riding.
It’s coming soon
Hi Tony. I haven't seen a new video from you in nearly a year. Everything OK ?
what is the pull seize
Just bought these risers. What size is the moto bars?
Resembles Thrashin Supply parts
Oh Canada!!!!!!!
nice! is the discount code still active? I'm ordering pretty soon...
Looks great ! Are the handlebars from Original Garage Moto or elsewhere? If elsewhere, where and which ones? Thanks Tony.
They are ODI but original garage carries them.
Tony- awesome content! I just received my OG risers and ODI handlebars and I’m about to install. Question: Do I need to disconnect the battery during installation?
Also, did you have to Depin the wires to take them through the handlebar?
I did have to Depin.
Thanks for your quick response!
Hey Tony we need to meet up for a ride. I am open most of the time so just let me know.
Total miles is 81 miles from Milan Indiana to Louisville.
About Half way is Madison Indiana. Just let me know what you think?
Hey nice bike ! What wind screen do you got on ?
Memphis shades road warrior
Wish they had them without the pull back
Do you think you would have enough slack to go to the 10” riser ? I’ve got the same bike looking to do the 10”
I think so except for the speedometer
@@TonysGarageI’ll be getting the extention cluster cable.
@@TonysGaragehow tall are you ? I went with the same setup. 8.5 og risers. And the taller v twin bars. You have the taller rise bars or the low ones ?
How you doing Tony!
Love the bars, risers and display where you put it. How tall are you? And did you do the install yourself? Video?
I did do the install. It was pretty straight forward. Unfortunately I didn’t film it.
@@TonysGarage How tall are you?
5’6
What been happening Tony , Haven't heard from you in While , Hope all... well
Yeah it's strange ...he just stopped posting videos. Hopefully he;s okay.
@barrybarnes96 all good guys. Been involved in The Five Dirty Bikers Podcast. Which takes a lot of my free time. You all can check us out we are available on all podcast sites and drop new ones every Monday.
All good guys thanks for asking. I have been doing The Five Dirty Bikers Podcast. Which takes up most of my free time. Check us out we drop a new podcast every Monday. It's a lot of fun and not for kids😂🤣.
did you have to change the cables?
Nope, stock worked just fine
Did you end up pairing the OG moto bars with the 8.5 riser or did you find other moto bars to pair with the riser?
Thanks
ODI bars with the 8.5 riser
@@TonysGarage much appreciated 🤙
Will you be making a follow up review video any time soon?
What length did you go with for the speedo extension wire
I’m thinking it a 6 inches over stock.
Okay thanks I was trying get an idea bc I might go with the 10.5 riser so I might go with the 9 inches over stock to be safe
How tall are you ?
Tony how you been
Promo code expire?
What bushings did you use
Arlen Ness
How tall overall?
About 12 inches
Can u please give me and adress to order from?
What was the stock high ?
About an inch lower 12 inches I think.
Any more videos coming soon?
Yes, I have a bunch in the pipeline
Been few months since you installed these, are they still confortable?
Best setup I have ever used.
What was the overall height ? Thanks !
12 inches
@@TonysGarage
Awesome . Thank you .
Odi bars ?
Yes sir
@@TonysGarage just finished mine and they came out really nice
Hey mate what hight are you ?
5’6
How tall are you sir?
5'6
those bars look pretty cool. Nice review fanboy LMAO
🤣😂
hi can you send me parts number..for all the parts in lreland love your set up going to go with your setup
Are those tears in your eyes
Man, thought I edited that’s out😂🤣
That bike's too pretty for you...
It is isn’t it🤣😂
Hello, I am the manufacturer of LED headlights and like your video. I really want to have a cooperation with you. I have sent you the message via Instagram. Looking forward to your reply.
I currently work with Custom Dynamics, but would definitely take a look at what you have to offer.
@@TonysGarage I have send the message to your Instagram. Do I need to send it to your email?
Please not seeing it in Instagram
@@TonysGarage please check it again. Sent message via instagram again just now.
How tall are you?
5’6
How tall are you sir?