DON'T use heat to bring back plastic gloss! Yes, it will look shiny again, but it does this by bringing oils to the surface, making the plastic pieces even more brittle!
Is this risky? I want to repaint my scooter because there are scratches on it. I am never done a project like this so i am scaref to fail. Is this something i can do or is it to risky?
Moin, haste ’nen link vom Lack, den du empfehlen kennst. Was ist deine Erfahrung mit dem Hitze behandelten Plastik. (hab gehört soll leider nicht so lange bleiben der Effekt, lieber nachschwatzen)
Hallo. Danke für deine Frage. Sorry Lange her. Kein Link mehr. Da habe ich auch an einigen Stellen geschummelt. Solltest nicht so genau nehmen. Und das 2. Anliegen. Ja. Heißluft Fön hält ca 1 Jahr. Dann werden die Gummiteile wieder grau. Dir viel Glück im Leben.
The heat gun take off the stickers primer is what he sprayed before the black and after the black he sprayed probably a lacquer clear if you take your time you could probably do a way better job than that
Das mit den blassen Kunststoffteilen ist krass. Einfach nur mit dem Heißluftföhn drüber? Und hinterher Silikonspray? Konnte den Rest leider nicht ganz verstehen wegen der lauten Musik 😅 Mein Roller ist schon ganz schön blass geworden.. werd ich im Sommer mal in Angriff nehmen.
Also ich hätte zumindest die zu lackierenden Teile vorher abmontiert. Zum einen, weil man die Teile dann besser bearbeiten kann, zum anderen, dass man nicht überall diesen Sprühnebel hat, wo man ihn nicht will. so far icke
Entschuldigung, was ist K600 rating ? Sorry for my broken Deustch, but here we have "Pxxx" rating for abrasive sand paper, here is all the ratings: en.wikipedia.org/wiki/Sandpaper Is P600 1:1 with K600 ?
Am I the only one who thinks he ruined the look of the scooter? It looked way better stock. All he had to do was take off the gay rear basket. The paint job reduced the value of the Kymco.....
Das muss das Schlimmste, hässlichste Farbe Job, den ich je gesehen habe. Er ist zu faul, um die Abdeckungen zu ziehen und sehen, in der Sonne gut ist, dass es eine Glanzdifferenz vorhanden ist. Wirklich schrecklich!!
Ich muss Sagen das Resultat gefällt mir sehr gut! Die Lackierung hat den Roller optisch sehr aufgewertet. Klasse!
Good job bro came out nice 👍
VERY NICE!
Stark Junge!
I have this scooter, it was already black when I bought it,. ., it s from 2014 , already 20.000 km on it now.
Nice job mate :)
Well... THX Dude
Super
y love scooter❤❤❤
THX Bro. That is easy to paint
Amazing job you helped me a lot thx :)
THX to men.....
Sieht richtig edel aus, der Scooter. Kompliment!
Danke man
What is the name of the music selection i love it
jayman826 hello, sorry i forgot. Its from TH-cam deephouse mix.
buetifull!!!!!
Hahahahah
How many cans did you end up using?
3
DON'T use heat to bring back plastic gloss! Yes, it will look shiny again, but it does this by bringing oils to the surface, making the plastic pieces even more brittle!
Hi..... Well yes you are right. But for the first moment is 👍
7:03 lol
Das Video gefällt mir, aber ich würde schon die Verkleidung abbauen um ein sauberes Resultat zu erzielen.
Hast vollkommen Recht. Das war so ein CHEETING DAY
Are those the original tires and rims that came with the scooter?Hope you can translate.
Donny brown i can confirm it is
Aber das Abdecken der nicht zu lackierenden Teile ist sehr gut gemacht.
I'm gonna try this. What grit sandpaper did you use? Great job too
Hi :-) Well i canT answer. Its long Time a go. Sorry
How long did it take you from start to finish ?
Spencer Franklin ... 3 - 4 Hours
Is this risky?
I want to repaint my scooter because there are scratches on it.
I am never done a project like this so i am scaref to fail.
Is this something i can do or is it to risky?
Hi. It's easy. Dont worry
man kann die Plastik Teile auch mit diversen Pflegemitteln gut auffrischen.
Moin, haste ’nen link vom Lack, den du empfehlen kennst.
Was ist deine Erfahrung mit dem Hitze behandelten Plastik. (hab gehört soll leider nicht so lange bleiben der Effekt, lieber nachschwatzen)
Hallo.
Danke für deine Frage. Sorry Lange her. Kein Link mehr. Da habe ich auch an einigen Stellen geschummelt. Solltest nicht so genau nehmen. Und das 2. Anliegen. Ja. Heißluft Fön hält ca 1 Jahr. Dann werden die Gummiteile wieder grau.
Dir viel Glück im Leben.
@@SenorSu1973 danke für die schnell Antwort
whaere you get that autosprayer whats on top of the paint that black ?
LOL U well u can buy it everywhere. Normal Paint. And yes, it was black/grey before
The heat gun take off the stickers primer is what he sprayed before the black and after the black he sprayed probably a lacquer clear if you take your time you could probably do a way better job than that
Hey woher hast du das LED-Rücklicht und besitzt es ein E-Prüfzeichen und darf somit legal im Straßenverkehr genutzt werden?
Anonym Nobodycares hey. :-). Die waren vorher schon dran. weiss ich leider nicht. sorry.
Könntest du mal gucken, wie das LED Rücklicht heißt?
Ist das nicht das ganz normale serien Rücklicht ?
Nein, das Serienrücklicht hat keine LED-Beleuchtung.
And the clear cote then??
Pardon!?
suuusports you do not have put the clear cote on?
what was the spray before the black?
Nikalogy dark red and grey
suuusports no the paint that did nothing you just sprayed it over and then black... what was that?
Nikalogy primer
Das mit den blassen Kunststoffteilen ist krass. Einfach nur mit dem Heißluftföhn drüber? Und hinterher Silikonspray? Konnte den Rest leider nicht ganz verstehen wegen der lauten Musik 😅
Mein Roller ist schon ganz schön blass geworden.. werd ich im Sommer mal in Angriff nehmen.
Ja. Genau. Einfach Heisluftfön vorsichtig ran halten. Danach Silikonpray. BAM! WIE NEU
@@SenorSu1973 geil ich danke dir😁
Also ich hätte zumindest die zu lackierenden Teile vorher abmontiert. Zum einen, weil man die Teile dann besser bearbeiten kann, zum anderen, dass man nicht überall diesen Sprühnebel hat, wo man ihn nicht will.
so far icke
Icke juah....kann man machen. muß man aber nicht. Ich habe anschließend die Sprühnebel gereinigt. und sollte auch nur schnell gehen.
why you used heater?
Because. The plastic goes back to the original item
Strašný patlal
Le verni est mal fait mais cinon beau boulot a part le vernis rater
The ozone layer hates him
Entschuldigung, was ist K600 rating ?
Sorry for my broken Deustch, but here we have "Pxxx" rating for abrasive sand paper, here is all the ratings: en.wikipedia.org/wiki/Sandpaper
Is P600 1:1 with K600 ?
What?
Am I the only one who thinks he ruined the look of the scooter? It looked way better stock. All he had to do was take off the gay rear basket. The paint job reduced the value of the Kymco.....
Das muss das Schlimmste, hässlichste Farbe Job, den ich je gesehen habe. Er ist zu faul, um die Abdeckungen zu ziehen und sehen, in der Sonne gut ist, dass es eine Glanzdifferenz vorhanden ist. Wirklich schrecklich!!
Ilias Lamari . danke. für deine Meinung.
Ilias Lamari . wichtig ist aber, das du lernen musst, wie man richtig Deutsch schreibt. ;-)
dass du ...
peinture sur merde égal propreté.............
I DON'T CARE
Era più bello prima.....
Genau so sollte man es nicht machen
:-D ;-) Da hast du recht
Not good enough for german quality