hello, on 16:21 you put "ipv6 address *2001* :db8:acad:1::1/64" but on the document table it shows as " *200* :db8:acad:1::1/64" how come you typed *2001* :db8:acad:1::1/64?
When you connect Gigabit to Gigabit the link runs at 1Gbps, if you connect Gigabit to FastEthernet the links runs to the lower value (100Mbps), all this will not affect other settings of the connection, so you can choose any connection
how to change the ipv6 address 2001:db8:acad::1/64 on g0/0/0, if i connect this on g0/0/1? in try to connect to g0/0/0 i have this error : (maybe i can cancel previous request?) %GigabitEthernet0/0/0: Error: 2001:DB8:ACAD::/64 is overlapping with 2001:DB8:ACAD::/64 on GigabitEthernet0/0/1
In Part 3 : Display Device Information , when i click on PC-B terminal then it shows "user access verification" then it shows password and i type "cisco" as password then it become R1> but not R1# so how to solve this problem sir ?
@@romeroc24 ok thank it worked, my addressing table was wrong The ipv6 address of router interface g0/0/1 is 200:db8:acad:1::1/64 so that why i can't ping the other hosts
I changed g0/1 ip address to 192.168.1.2 and it gave me a duplicate notification but it let me do it still and I was able to ping pc a and pc b from each other. How is that possible?
@@romeroc24 i confirmed in the ip interface brief that it was changed and even reloaded the router for good measure but still works. Your explanation in the video makes sense im just concerned now that packet tracer is unreliable
@@romeroc24 lo intentaré una vez más... todo va bien ... pero en la parte dr hacer ping de pca a pcb en la ipv6 me marca tiempo agotado, pero con ipv4 si puedo
Greetings from all MDS students from Łódź :)) You are our saviour
Thank you, you are motivating me to continue with this for long time
Christian, I can't find the words to ackowledge your help. YOU ARE GOAT!
Thank you for all your support, thank you again
Thank you so much, you are doing Gods work.
thank you very much, I appreciate
No he's doing our homework.
Thank you so much, every time I get stuck with my classwork your videos are so helpful.
Thank you for all your support
You are a legend at explaining. Thank you very much!
Glad it helped! I appreciate your comment
Greetings from all MDS students from Łódź u save us again !
Thank you for all your support my friends on Poland, go ahead!!!
What a fucking mad lad. You're a legend dude.
thank you for all your support
I love your videos dude. Thank you for doing this!
I appreciate your comment, thank you very much
MDS students from Łódż here again, thanking for saving our asses again:)))
Thank you again, thank you for all your kind support!!!
i cant believe i learn so much from you instead on my prof LOL!
I appreciate your comment, thank you very much
you are the man for doing these videos! Thank you!
Glad you like them! I appreciate it! I needed those words to continue going better person
Thank you
No puedo hacer esto sin tus videos
Soy muy estupido hacerlo yo solo 😭
Verás que algo de cosntancia y unas semanas más y podrás dominarlo
@@romeroc24 gracias, lo estoy echandole ganas!
@@lcameeno1 sigue adelante mque nada te detenga
thank you so very much. I now understand because of your explanation
You are welcome! I appreciate it
Thank you very much!
You're welcome!
Thanks for amazing work and help for labs.
Happy to help! Thank you
hello, on 16:21 you put "ipv6 address *2001* :db8:acad:1::1/64" but on the document table it shows as " *200* :db8:acad:1::1/64" how come you typed *2001* :db8:acad:1::1/64?
should be 2001 because document has the error
@@romeroc24 thank you!!
thank you so much your video helped me with homework assignment
Thank you, I appreciate your comment
Your video is very helpful. Thank you!
thank you for all your kind support
Thank you so much for this. It was very helpful!
I appreciate, thank you
hey when i type int g0/0/0, i get "invalid type and number" help?
try to use g0/0
Thank you!
You're welcome!
Thank you so much for your video!
I appreciate your comment, thank you
Thank you, you are a legend :)
Glad it helped, I appreciate your comment
Thank you good sir, very helpful!
Thank you very much
I follow as instructed at 20:21 , when i try to verify it all four times it says Request time out. What could be the problem?
please review the interfaces where you configured ip addresses
@@romeroc24 This is the third time, but it seems that it works now. It beucase i put the wrong router
@@cooldude8551 all will be ok with the correct router
@@romeroc24 thank you for the video
thank you so much
Thank you my friend!!!
Me has salvado, gracias , excelente video
Gracias por tu comentario. Saludos
Thank you professor
You are very welcome
why didnt you use cross-over console cable?
For the router
New routers use MDI/MDIX technology , thank you
You're superb man !
Thanks, you too! I appreciate!
thank you thank you thank you
You are very welcome
Gracias por otra buen video.
gracias por todo tu apoyo
i still was unable to connect to PC-B from A , how will it be done ? please explain
verify the addressing again
Why didnt you connect giga to giga instead of giga to Fethernet? In any case, THANK YOU!
When you connect Gigabit to Gigabit the link runs at 1Gbps, if you connect Gigabit to FastEthernet the links runs to the lower value (100Mbps), all this will not affect other settings of the connection, so you can choose any connection
what should i do if the ipv6 is not pinging??? on PC-A and PC-B
verify if you configured the "ipv6 unicast-routing" in the router
bro it says tioo ping pc-b from pc-a right???? u did pc-a from pc-b.....🙄 totally confused
you can do it from PC-B to PC-A or vice versa
the R1(config)# interface g0/0/0 didn't work says invalid input, can you help on this please but I am doing Lab on NDG
use "show ip interface brief" command to know what is your interface
You have the one for NETLAB?
this is th-cam.com/video/KHi3i_oxk74/w-d-xo.html
I did everything exactly like you did, copied it step for step yet I can't ping the switch from either PC (26:07) I have no idea why
send me the file using social networks shown on 00:03
how to change the ipv6 address 2001:db8:acad::1/64 on g0/0/0, if i connect this on g0/0/1?
in try to connect to g0/0/0 i have this error : (maybe i can cancel previous request?)
%GigabitEthernet0/0/0: Error: 2001:DB8:ACAD::/64 is overlapping with 2001:DB8:ACAD::/64 on GigabitEthernet0/0/1
first remove the ip address on g0/0/0, "no ip ipv6 address 2001:....."
Thank you very sir really appreciate your hard work
All the best, I appreciate
I stopped the video at 19:02 for like half an hour and now it asks me for a password, what should I type?
use the enable password you configured previously
passwords are shown in 11:10
Thankyou again!!
I appreciate
Thank you so much. It was really useful
You are welcome! I appreciate it
In Part 3 : Display Device Information , when i click on PC-B terminal then it shows "user access verification" then it shows password and i type "cisco" as password then it become R1> but not R1#
so how to solve this problem sir ?
there are three password, one for console, another for vty and another for enable, please use for console first then for enable.
I tried it with "Cisco" first then the second password is "class" then it works
@@alexyongwaisheng5859 very good
after you type cisco and type enable
it should bring you to R1#
If I am not mistaken
Thank you, but I can't ping the ipv6 address of PC-B from PC-A
try to review the ipv6 unicast-routing on the router, aslso review if the ipv6 addresses on router interfaces and hosts are very well configured
@@romeroc24 ok thank it worked, my addressing table was wrong
The ipv6 address of router interface g0/0/1 is 200:db8:acad:1::1/64 so that why i can't ping the other hosts
@@gavydann3699 very good
Hi Cristian, thanks a lot for your video
Excuse me sir, May you drop your file 10.4.4 Lab - Build a Switch and Router Network packet tracer to me download please?
Please follow all steps on this video to create your own file.
@@romeroc24 Thanks so much.
THANK YOU SO MUCHHHHHH
Thanks to you
I mistyped the ip address for g0/0/1 interface so I just retyped. It's working fine but I want to remove wrong IP address. How do I remove it?
for ipv4 only overwrite, but for ipv6 remove the command, using "no" before the complete command
@@romeroc24 oh thanks for fast reply. Your video really helped a lot
Why I cannot sdm prefer dual-ipv4-and-ipv6???
that command is permitted commonly on real devices
@@romeroc24 Ohhhhh.... thank you Romero I am gay for you. Lol jk
I cannot ping any end deivce, can you help me sir?
PLease review all the connections, maybe you area using different interfaces on devices
I can't either. I'm on my third attempt. :(
thank you
thank you
how do you save a configuration file (.txt) ?
first use "show run" command then copy and paste to a text file
Christian Augusto Romero Goyzueta ok thank you also I send you a document of my lab hwk can you do a video on that for me and classmate
@@Bino_1999est two last videos on this playlist th-cam.com/play/PLdtRZtGMukf6qS4flvhbwfvxTs2qp0tB1.html
bro omg tenks u help me lots bro!
I appreciate your comment, thank you so much
I changed g0/1 ip address to 192.168.1.2 and it gave me a duplicate notification but it let me do it still and I was able to ping pc a and pc b from each other. How is that possible?
Maybe duplicate message not permitted the configuration
@@romeroc24 i confirmed in the ip interface brief that it was changed and even reloaded the router for good measure but still works. Your explanation in the video makes sense im just concerned now that packet tracer is unreliable
@@AB-in2tj You allright and try to do it on GNS3 to verify
No la tienes en español?
por ahora no, pero le puedes elegir subtítulos con traducción al español
Can you please put the packet tracer file here
You need to follow all steps to create your own file
tysm dude
Thank you for all your support
sir in part 3 when i open PC-B it ask for a password but not take any input from keyboard..😔
passwords will not be shown, just type and press Enter
@@romeroc24 but sir when i try to type something it doesn’t work only enter is taking the input any other key is not working
@@vampire4051 contact me using social media shown in 00:03
i love you
Thank you for all your support
NO puedo hacer ping en las ipv6
por favor revisa todo de nuevo
@@romeroc24 ya llevo 3 intentos desde 0 y nada :(
@@explotatusconocimientos845 en mi video se ve paso a paso, talvez olvidaste algo o salteaste el video
@@romeroc24 lo intentaré una vez más... todo va bien ... pero en la parte dr hacer ping de pca a pcb en la ipv6 me marca tiempo agotado, pero con ipv4 si puedo
@@explotatusconocimientos845 al final del video muestra la resolución de agregar una ruta ipv6
Me urge
puedes seguir los pasos del video par completarlo
I honestly prefer if you put a subtitle in English, it's really hard to understand what your saying.
OK, thank you, I will improve these videos
Thank you so much!
You're welcome!
Thank you!
You're welcome!
Thank you so much
You're most welcome