No Limit Drag Racing 2.0: My Guide to Tuning (Update 1.2.7) Read Description

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ก.ค. 2021
  • this is not necessarily a guide to how I tune because like I said in the video, it's alot of trial and error
    it's more of an explanation, in the best way I can explain it, of what each individual section of tuning does
    keep in mind I'm not the best tuner out there nor do I know everything there is to know about cars or their parts but this is the best way Im able to explain things
    take these tips and hopefully they'll help you in tuning your vehicles and understanding the game a bit more
  • เกม

ความคิดเห็น • 58

  • @tremendous7843
    @tremendous7843 2 ปีที่แล้ว +4

    Thanks for everything I know there’s a lot of trial and error but I got instant results. You now have a new subscriber!

    • @SyndicateMobile
      @SyndicateMobile  2 ปีที่แล้ว

      Thanks tons man just glad it helped some, thought maybe explaining how things affect the car over how I personally tune would help ppl more because I know everyone tunes differently

  • @kurtguy4336
    @kurtguy4336 2 ปีที่แล้ว

    Good video. Took one of my solid 5.9 cars and used some tips from your video got me in the lower 5.8s now

    • @SyndicateMobile
      @SyndicateMobile  2 ปีที่แล้ว +1

      Niceee man, glad it helped u out some

  • @tysonatkins2236
    @tysonatkins2236 ปีที่แล้ว

    Finally, a video where someone explains all this stuff, instead of just showing what their tune setup is! I was trying to figure out how to tune the gears by looking at charts online, but they're too confusing. The way you explained it was so much easier to understand. I've been setting my launch control at 7,000rpm because that's where the peak torque is on the dyno, so it made sense to me to launch from there, but I noticed that most people in these videos don't use the launch control. I have some cars at 6,000-6,500rpm to try and get more time off the line before it redlines, but I haven't been able to get the times that others are getting. I'll try turning off the launch control, and see if that helps. Thanks again for your detailed video, brother!

  • @carsonowens778
    @carsonowens778 3 ปีที่แล้ว

    This video is much appreciated!!! 🙏🙏

    • @SyndicateMobile
      @SyndicateMobile  3 ปีที่แล้ว

      Np man. Not the best tutorial in the world cause I'm not the best at explaining things but hopefully it helped some ppl

  • @crazyogre8373
    @crazyogre8373 3 ปีที่แล้ว

    Great video bro. You really have helped me!!

    • @SyndicateMobile
      @SyndicateMobile  3 ปีที่แล้ว +1

      Thanks man, hard to explain trial and error but I did what I could to explain things the best I could lol

  • @amarillosparky
    @amarillosparky 2 ปีที่แล้ว

    Solid tutorial. Helped me. Best advice given. Trial and error. Forgot. Un bar the world lol…..

    • @SyndicateMobile
      @SyndicateMobile  2 ปีที่แล้ว

      Lmao think the reason alot of us run bars is because we didn't run them at all pre 1.2.3 so it's a nice change.

  • @Raven_j-hoops
    @Raven_j-hoops ปีที่แล้ว

    Bro thank you on this video because when I was tuning my car it would only go to the 4 on the meter thing and 3 when I did launch but to your video it goes to the max speed it should

  • @francoamerican4632
    @francoamerican4632 หลายเดือนก่อน

    Use the Dyno to adjust the fuel and timing settings. After each Dyno run adjust the fuel and timing settings up or down until all of the settings are inline with the line on the Dyno chart.

  • @Joetemalet0
    @Joetemalet0 3 ปีที่แล้ว

    Thanks for the great content

    • @SyndicateMobile
      @SyndicateMobile  3 ปีที่แล้ว

      Np at all man, just tryna help ppl out some

  • @dilansalazar2100
    @dilansalazar2100 3 ปีที่แล้ว +1

    Good video bro

  • @kingq8574
    @kingq8574 3 ปีที่แล้ว +1

    Lets goo 🔥🔥

  • @shapeshifternwo
    @shapeshifternwo 2 ปีที่แล้ว +1

    In what exact order do u usually tune your cars. I mean like tires first then gearing second? And how do u usually pick rear tire size? I see some using 35s on rear.

    • @SyndicateMobile
      @SyndicateMobile  2 ปีที่แล้ว

      I always do all my upgrades first, normally I use 31 21s on all my tunes with only a few exceptions, mostly 35s are only used on irocs and useful. Your tire size is gonna affect your transmission ratios tho, that's why I always pick a tire size first then tune everything else around that tire

  • @wyatturner6934
    @wyatturner6934 2 ปีที่แล้ว

    I like to use a small tire car. 10.5 slicks to be specific. I do the 1/4 in about 6.1 on average. I can't never get better than a 1.08 60' time any ideas? It is a nitrous motor.

  • @shapeshifternwo
    @shapeshifternwo 2 ปีที่แล้ว

    Sorry to bother again but i am running consistent 5.7s after tuning suspension. Do you think i should start fine tuning gearing yet or keep working on suspension until i get to a lower time? I notice my 60’ is kind of slow. .890 on average for 60’. Any advice on these two things would be appreciated. Thanks again.

    • @SyndicateMobile
      @SyndicateMobile  2 ปีที่แล้ว

      If your car feels like it's not sluggish or anything going down the line your suspension should be fine, go try a bit on your transmission some and see if you can bring the time down some, u may have to go back and forth between suspension and trans tuning a bit to fine tune it

  • @marekkristian627
    @marekkristian627 2 ปีที่แล้ว

    Hello, when I start a race in my supra front of the car is going up, but why? Im a newbie

  • @thrillkiller8456
    @thrillkiller8456 3 ปีที่แล้ว +7

    A good thing to do is make at least 3 runs for each adjustment and write down on paper.

    • @SyndicateMobile
      @SyndicateMobile  3 ปีที่แล้ว +5

      That is ideal lol problem with writing down for me is I wouldn't be able to re read my own handwriting 😂😂

    • @BMW_DAILY
      @BMW_DAILY 2 ปีที่แล้ว

      @@SyndicateMobile screenshot or screen record 😎

  • @tipsfrommerk
    @tipsfrommerk 2 ปีที่แล้ว

    Any chance of doing a 28x10.5 how to tune?

  • @shapeshifternwo
    @shapeshifternwo 2 ปีที่แล้ว

    At what point do you know when your gearing is right so you can move on to suspension? Is it when you reach the low 5.8s? Thanks again.

    • @SyndicateMobile
      @SyndicateMobile  2 ปีที่แล้ว +2

      I normally do suspension first and then I fine tune my gears until I get around a 5.72, then I'll start adjusting one gear up or down by 1 until it pulls into the 5.71s or 5.70s then I'll do quite a few runs trying to pin point which individual gear is too long or too short

    • @shapeshifternwo
      @shapeshifternwo 2 ปีที่แล้ว +1

      Good to know ty.

  • @redneck-gabriel
    @redneck-gabriel 2 ปีที่แล้ว +1

    I tune the same exact same way you do

    • @SyndicateMobile
      @SyndicateMobile  2 ปีที่แล้ว

      Niceee, heard a few say that that I talk to in game

  • @user-ln7pj5yk1y
    @user-ln7pj5yk1y 3 ปีที่แล้ว

    Teach me how many seconds to put out a normal light. 🇹🇭🙏

  • @MPelillo777
    @MPelillo777 2 ปีที่แล้ว

    One question does the bump and rebound apply to 28x10.5 or is it different

    • @SyndicateMobile
      @SyndicateMobile  2 ปีที่แล้ว +1

      It's a bit different with 10.5 on some vehicles depending on the base height

  • @frenzy3916
    @frenzy3916 2 ปีที่แล้ว +1

    How do you get all your money and gold?

  • @dondutton1964
    @dondutton1964 2 ปีที่แล้ว

    Hey can you help me? My wheelie bars are leaving drag marks on the street. Any ideas?

  • @peapod5281
    @peapod5281 3 ปีที่แล้ว

    How do I fix my car sliding around when I’m accelerating, new tires and everything

    • @SyndicateMobile
      @SyndicateMobile  3 ปีที่แล้ว

      More than likely ur weight is too far forward or ur first gear needs to be adjusted, could also be ur wheelie bar is too low

    • @peapod5281
      @peapod5281 3 ปีที่แล้ว

      @@SyndicateMobile what I meant to say it was fishtailing In 1-4 gear but

  • @shady_fivem7431
    @shady_fivem7431 3 ปีที่แล้ว +1

    How do you remove front clip with new update?

  • @taydidit
    @taydidit 3 ปีที่แล้ว

    anyone else’s launch control stuck at 4K rpm? what upgrades or tune it stays there

    • @SyndicateMobile
      @SyndicateMobile  3 ปีที่แล้ว +1

      May be ur computer under upgrades. Upgrade everything under your computer options

    • @taydidit
      @taydidit 3 ปีที่แล้ว

      @@SyndicateMobile i’ve fully built a car, all max upgrades. don’t know what the deal is🤷🏽‍♂️

    • @SyndicateMobile
      @SyndicateMobile  3 ปีที่แล้ว

      It won't let u move it past 4k? 🤔

    • @_boosted_photos_
      @_boosted_photos_ 3 ปีที่แล้ว +3

      I wonder if you are holding the Bump button.

    • @taydidit
      @taydidit 3 ปีที่แล้ว

      @@SyndicateMobile yeah it’s odd no matter how i adjust the launch rpm it sits at 4K

  • @ProSlickz
    @ProSlickz 3 ปีที่แล้ว

    Not going to lie but I just go to TH-cam and look up the tune for the certain care 😂

    • @SyndicateMobile
      @SyndicateMobile  3 ปีที่แล้ว

      Lol I think alot do 😂😂 some ppl were asking to learn to tune their own so I just made this one day in my spare time lol

  • @wekasa9956
    @wekasa9956 3 ปีที่แล้ว

    How fast is it ? It is like 6 sec ?

  • @kourtneyhenderson8904
    @kourtneyhenderson8904 3 ปีที่แล้ว +1

    Can I get tune in first