Train Simulator 2020 | Settle to Carlisle in a Jubilee Class
ฝัง
- เผยแพร่เมื่อ 22 ธ.ค. 2019
- A pleasant drive on the Settle to Carlisle line in a beautiful Stanier Jubilee Class!
Become a Sam'sTrains engineer here: / @samstrains
Get your Sam'sTrains merch: teespring.com/stores/bullmane...
Thanks for watching!
Email: samstrains@outlook.com
Instagram: samstrainsofficial
Facebook: samstrains
Twitter: samstrains - ยานยนต์และพาหนะ
![CAMPปลิ้น | EP.79[1/2] แก๊งไทบ้านพาบุกเมืองบั้งไฟโก้ ยโสธรรรร!!!](http://i.ytimg.com/vi/Ldr3_fvTEXk/mqdefault.jpg)
"just bought it on steam" joke there somewhere lol
haha!! ;D
Lol
I highly recommend the Western Lines of Scotland, a route between Carlisle & Stranraer via Dumfries and the old Port Road as it was between 1963-1965. Comes with some Black Fives, MK1s, and several pieces of freight stock with an enormous list of realistic and engaging scenarios that cover a host of tasks like shunting around Carlisle, taking a boat train from Stranraer, to hauling the Thames-Clyde express. The route is a few years old but it hasn't aged a bit in my opinion and I consider it the best overall steam-era route for TS2020, even compared to the classic S&D or the Riviera Line in the Fifties.
Thanks a lot for that David - I'll have to give those a look!! :D
Thanks for watching - Sam :)
I seriously MUST point out that I personally just suddenly recently recall seeing the well-known steam-driven railway tender locomotive known as Leander in the officially well-known Great Britain section of my own official DVD that's basically titled The Best of World Steam with narration by Peter Fairhead himself that the well-known Settle & Carlisle route is a specifically wonderfully great 72 miles long!
nice one Sam
I had a very short footplate ride on Leander back in the 70's. We visited the old Steamtown museum at Carnforth when the place was still open to the public. Leander was based there and when we went she was being readied for a trip over the S&C. I watched her being coaled and got chatting to the crew. They said the coaling was nearly done and the next move was about 200 yards through the line to the turntable, and would I like a ride!! I was about 15 at the time and wan't going to turn down a chance like that, so I stood at the back of the footplate (more like the tender fall plate) abd rode her to the turntable where I watched her being turned. An Amazing experience.
Its one of the reasons theJubilees are my fave LMS locos
Thanks for stirimg u[ a very happy memory
JON
That sounds fantastic Jon - lucky you!! I don't blame you for liking them such much in that case - what an experience!
Thanks for watching - Sam :)
Sam this was most enjoyable. Lots of accurate graphics helped me relive. My ride on the line. What a treat!
Great to hear that Bill, really glad you enjoyed this - it is a lot of fun! :D
Thanks for watching - Sam :)
Can't believe they remade this route from MSTS 2001. Looks incredible.
haha it really does!! :D
Even as you set the route I thought, 'Sam's not gonna reach the viaduct!'
haha I know - wish I'd researched the route a bit better first ;)
Thanks for watching - Sam :)
I seriously do personally just suddenly recall that there's a speed restriction over the Ripple head viaduct due to the officially well-known observation that section of the line certainly happens to be the only place that's single track!
Nice video, that route is great! I would love to go on that in real life, especially on the viaduct. Great one Sam 👍
Thanks a lot George - it's certainly a lovely Viaduct - more interesting to walk around the bottom of it actually! :D
Merry Christmas,
Sam :)
I have been on this route,and see the flying Scotsman
very epic indeed i love your ts videos they are always great, keep up the good work
Thanks so much mate, really glad you like them! :D
Cheers,
Sam :)
This is amazing Sam! Merry Christmas and Happy New Year! 🎄:D
Thanks a lot Kameron - Merry Christmas! :D
Thanks for watching - Sam :)
Awesome Sam! Love to see these!
Thanks a lot mate! :D
Love the jubilees. Have a great Xmas mate!
Me too mate! Merry Christmas! :D
Thanks for watching - Sam :)
Wow Sam this scenario looks great, and you are a very good driver.
Thanks very much Emma - I don't think I am! ;D
Thanks for watching - Sam :)
I just got this game yesterday and it was so fun XD! I build my own railway took me 45 days to make it finally it’s done
I test it out tried some steam engines and some other shunting and loading and other pulling coaches
It was fun I played for 4 days on my own world so fun I loved it so much
And I got addicted to it xD
It is so much fun - wow that's a long time - are you happy with it?! :D
Thanks for watching - Sam :)
Sam'sTrains yes I am happy with it xD
Awesome video today Sam and beautiful locomotive and merry Christmas
Thanks a lot James, glad you enjoyed it! Merry Christmas! :D
Thanks for watching - Sam :)
OH WOW, WHAT A PERFECT CHRISTMAS GIFT! I'm a recent subscriber, and I didn't know you played train sim, what a good treat!
haha that's awesome - hope you enjoy this mate! :D
Thanks for watching - Sam :)
The Jubilee is beautiful in the snow! I hope you have a Merry Christmas Sam! :)
I agree - really enjoyed doing this one Ryno! :D
Merry Christmas,
Sam :)
Great Video Sam Nice to see you gaming again keep it up my friend
Cheers Lazer, appreciate It! :D
Thanks for watching - Sam :)
LaZeR JET Hello
Hey Sams trains merry Christmas to you keep up the good work 👍👍👍🎅 🇺🇸🇬🇧
Merry Christmas mate, you're very kind! :D
Cheers,
Sam :)
I love the reviews of your set but this is 10x better. :)
That's very kind of you - really glad you enjoyed it! :D
Thanks for watching - Sam :)
hi sam greate video the jubilee class in amasing :D
Thanks a lot mate, glad you enjoyed it! :D
Cheers,
Sam :)
Hi Sam, Very enjoyable early Xmas present 😁 ,Why not , Happy Christmas and New year, All the Best Brian 🤗
haha thanks Brian - Merry Christmas and a Happy New Year!! :D
Merry Christmas,
Sam :)
Nice one Same.
All the best
Duncan.
Thanks very much Duncan, all the best to you too! :D
Cheers,
Sam :)
Quality driving from Sam
haha I don't know about that! ;D
Hi Sam great presentation ,i use TS2020 too ,i use it as a ref for the build of my layout .Have a great Christmas .Regards Mac
Thanks very much mate - ooh nice, good luck with that!! :D
Thanks for watching - Sam :)
Great video Sam have a great Christmas
Thanks very much David, Merry Christmas! :D
Good video! Have a nice Christmas Sam! 😀
Thanks very much mate, you too!! :D
Thanks for watching - Sam :)
Awesome Sam this is so cool
Cheers mate! :D
Hey sam, if you over fill a boiler, it doesn’t stop. Also it will jam your regulator wide open if over filled (it happened to a black 5 in the 80s 😬) water will go into your cylinders and make them explode, so it isn’t too good.....
Blimey, sounds pretty bad!! Thanks for the info! :D
Thanks for watching - Sam :)
Very good made video, also merry christmas!
Thanks a lot Emil, Merry Christmas! :D
Thanks for watching - Sam :)
I didn’t know you played Train Simulator. I’ll look forward to watching videos more like this.
Absolutely!! Hope you enjoy the mate!
Merry Christmas,
Sam :)
Sam,
Happy Christmas!
FYI, viaducts are bridges that carry routes (vias) and aqueducts carry water (aqua).
So the routes can be railway or road, and the water can be canals or water supplies.
Nice video!
Regards, Tom
Merry Christmas Tom - haha yes, I just get mixed recalling the correct term quickly, haha!
Merry Christmas,
Sam :)
Have the line myself it’s great
Awesome - I've really enjoyed it so far!! :D
Thanks for watching - Sam :)
D/Ling a Steam update now. Oddly fun watching someone else play. Steam has some deeply discounted sales which notify you according to your wishlist-- very handy. Okay, let's take a trip. Merry Christmas, Sam!
Thanks a lot mate - that sounds great, I'll have to check those ones out!! :D
Thanks for watching - Sam :)
Hi Sam, you can't overfill a boiler using the injector as the injectors use steam from the boiler to force water into the boiler, if you fill the boiler full of water there will be no more steam to make water go in. If you are interested simply google the term boiler priming and you should be able to find out as much as you'd like. p.s merry christmas
Ahh that makes a lot of sense - thanks a lot for taking the time to explain that, appreciate it!
Merry Christmas,
Sam :)
A viaduct is a bridge composed of several small spans for crossing a valley, dry or wetland, or forming an overpass or flyover. The term is conventional for a rail flyover as opposed to a flying junction or a rail bridge that crosses one feature. An aqueduct same kinda thing but it carries water!
Duly noted John - I just can't help but mix them up in conversation! ;D
Thanks for watching - Sam :)
sam the class 450 is an EMU and it runs of DC third rail and that route diddent have third rail so that means that only DMU, steam and dizle trans can run on it the class 450 came with the Portsmouth direct line (my locol line that's why i know so much a bought it) so i had to be the 158 and the jubilee (xcuse my rubbish spelling)
Ooh I see - can't have been that one then! I think it must have been the 158! :D
Thanks for watching - Sam :)
great video thx.
Thanks mate! :D
I was wondering if you made Train Sim videos after I heard you mention it in your 360 video, and needless to say it's pleasantly surprising to see this video! I enjoyed it a lot!
This game is definitely on my wishlist
Thanks a lot Jack - I try to do these every month or so where I can - hope you can get it soon! :D
Thanks for watching - Sam :)
Yay more train sim
Thanks Joe!! :D
In future you should open the cylinder drain cocks as water will collect in the cylinder and cause hydraulic locks. When you open them nothing will come out until you open the reverser and regulator
Yes you're right - I didn't even think about those this time, lol! ;D
Pretty cool video. Please make more great videos like this in the future. Thanks for sharing. LJL
Thanks mate, I'll do my best to!! :D
Thanks for watching - Sam :)
LJL RailYard hi
Hi
hey there sam have a wonderful christmas.
Thanks so much mate, you too!! :D
Merry Christmas,
Sam :)
I got the country ramblers set, the special edition flying scotsman and carriages for Christmas!😁😁
Ooh fantastic - that sounds awesome! Merry Christmas! :D
Merry Christmas,
Sam :)
@@SamsTrains thanks
Merry Christmas Sam! :D
Merry Christmas mate! :D
Great video Sam! I was wondering, will you be covering trains throughout Asia as well? In my opinion Europe and Asia have the most spectacular trains
Thanks a lot Michael -- I may try that one day, great idea!! :D
Thanks for watching - Sam :)
Sam'sTrains only if you want to, just keep doing what you’re doing because it’s fantastic!
When one over fills a boiler the injectors will stop and the water is forced through the dry pip into the cylinders and possibly cracking the cylinder castings.
Oh dear - sounds like a fatal error then!
Thanks for watching - Sam :)
Merry Christmas sam
Merry Christmas Justin!! :D
Thanks for watching - Sam :)
Nice vid!
Thank you!! :D
Hey Sam just to answer your question if the boiler was overfilled it could warp the tubes baffle plate and tube plate to the point where It could actually break the welds the most common eventuality is the tubes cracking and flooding the fire
Thanks very much for the info - definitely unwise to overfill them then!! :O
Thanks for watching - Sam :)
If you over fill a boiler then the engine will prime which is where water is pulled from the boiler into the cylinders. If you don’t open the cylinder drains the cylinder will hydraulically lock which can lead to the cylinder exploding or if you do open them it sends showers of water everywhere and stops a seal from forming round the piston decreasing the power of the loco till the water is cleared
I hope this explains what happens helpfully
Many thanks for the information there - much appreciated! I'll bear that in mind for next time! :D
Thanks for watching - Sam :)
I didn’t know you played train simulator but it’s a very good video-Sean
haha thanks Sean - glad you enjoyed it mate! :D
Thanks for watching - Sam :)
Leander is pronounced Lee-ander. And Merry Christmas, Sam and folks.
Thanks very much Jonatan, Merry Christmas! :D
Thanks for watching - Sam :)
Nice video sam
Thanks AJ! :D
@@SamsTrains No prob sam
Overfilling the boiler will.cause the steam to become damp with the potential hazard of priming of the cylinders with water. That happened to Blue Peter back in 1994. The inexperienced crew overfilled the boiler and managed to prime the boiler resulting in a regulator that jammed open and a massive wheelslip at maximum revs which terminated the valvegear. Ouch.
Thanks for the tip Craig - I'll bear that in mind!
Thanks for watching - Sam :)
Just a tip: if you wish to change the starting point of your quick drive scenario, when you load in press CTRL+E to go to the editor and then press the picture of a loco in the top right. This allows you to move trains, edit their destinations, add new trains, ect. Holding Shift and Left Clicking a train will select the entire train, and then you can drag it to another location. Just the very basics of scenario editing, might come in handy one day. 👍
Thanks very much for this Will, I'll give that a try!!
Thanks for watching - Sam :)
You can overfill the boiler, causing priming and in worst cases going solid, but the latter is realy only possible on an engine with an axle pump.
Uh oh - glad the game didn't simulate any of that - lol! ;D
Thanks for watching - Sam :)
Great video I have exactly the same problem I can never get the train to stop exactly at the platform.
haha yeah - it's tricky isn't it?! ;D
Thanks for watching - Sam :)
Nice video comrade very nice
Thanks a lot Joseph! :D
@@SamsTrains no prob
Hi Sam, information time. I think you'll find that the loco name "Leander" is pronounced "Le-an-der", while, the consequences of over-filling the boiler would at leased cause "Priming." Water coming out of the safety valves, scalding anyone it landed on, up to and including terminal damage by hydraulically locking the cylinders and possibly bending a connecting rod or three. Yes it's a three cylinder locomotive. Along with this you would probably receive your P45. Good video though. Good luck and a Merry Christmas. Regards, Alan.
Thanks a lot for the info Alan, much appreciated mate! :D
Thanks for watching - Sam :)
Hi sam lovely jubilee second favourite Midland engine to only to the Jinty. I am considering a second loco for my layout and have found to locos of similar price, the county class 4-4-0 or the j39 by bachmann. Which would you recommend?
Thanks Matt, glad you like these mate - I'd recommend the county 4-4-0 myself! :D
Thanks for watching - Sam :)
how do you change to the fireman side of the cabin?
There is a much better, newer and advanced version of the jubilee
Ooh really?? I'd love to try that! :D
Thanks for watching - Sam :)
@@SamsTrains It's produced by Bossman Games and you can either get it off of Steam (currently on Sale) or from Bossman Games' website. The Steam version comes with LMS Crimson, BR Green, and a special Black & Chrome livery which was applied to 5552 "Silver Jubilee", as well as matching Stanier and Fowler tenders plus a set of MK1s (BG, BSK, BFK, FK, SK, TSO, RMB). The version from Bossman Games' website comes with LMS Crimson, LMS Experimental Blue, LMS Post-war Black, the special Black & Chrome livery, BR Green, and BR Black as well as matching Stanier and Fowler tenders, but no coaches. The pack comes with huge improvements to the sounds as well as better physics and access to more controls to make the loco act and feel much closer to the prototype than the original Jubilee from way back in 2013. The manual covers other special features (changeable lamp positions, shed codes, and headboards). Be warned: there will be a learning curve, but once you've got some practice you'll be flying down the line like a pro.
Sam'sTrains in short, you need a good bit of practice to use it. Took me a good week to get the hang of it
@@SamsTrains the Settle to Carlisle route and locomotives with it are from 2012, so quite old.
I do love me some trains!
Me too! :D
Sam train you are awesome
Bless you Corey, thanks very much! :D
Cheers,
Sam :)
@@SamsTrains I love your model trains
I love that game, wish I could play!
-Ollie
Thanks Ollie, I can highly recommend it! :D
Thanks for watching - Sam :)
Nice video
Thank you!! :D
I was wondering how to select and drive engine since I’ve been trying to right and left click to control my engine
Hmm interesting - I'm not sure about that one!
Thanks for watching, Sam :)
Have you ever been to whitrop siding near newcastleton? Theres a class 27* sitting there
@Iain Botham dont ask me
I never have Iain, but it sounds great!! :D
Thanks for watching - Sam :)
Heres some tips from my experience with real railways, You have to keep the cylinder cocks open while youre still and when you turn the first few revolutions. The brake stays on until you put the loco in fowards or reverse gear, then the whistle after the guards permission and then you can open the regulator with gente taps and slowly push it into place but you never put the braked on while youre moving unless to slow down or else the wheels will be damaged. After setting off, you must whistle again to the guard for the second right of way.
Thanks very much for the tips - duly noted - I'll give those a try next time! :D
Happy New Year,
Sam :)
@@SamsTrains Thanks Sam, ive been playing TS and Trainz for a long time and I have got used to the controls on different locos and have had real railway experience so i use those skills in the game
Don't you open the drip valves and leave them open till u have been moving for about 5 seconds to remove any water and or scale in the chili dear to prevent hydro locking it
Is that the same as the cylinder drain cocks? If so, yes, but they're not open by default!
Thanks for watching - Sam :)
Sam'sTrains yeah it's same thing
Do you have any tips as to how stop the bogie wheels on an a3 derailing round curves?
Hmm, what radius curves are they? If they're 1st radius, you may have problems!
Merry Christmas,
Sam :)
@@SamsTrains Merry Christmas! They're 2nd and 3rd radius - I changed a flanged wheel for a non flanged wheel and it seems to have mostly solved it.
Only thing missing is the tea/coffee/ice cream van at Ribbleshead.
haha very much so - that was there when we went too!
Thanks for watching, Sam :)
I really enjoyed that Sam. I filmed Leander at Wigan last year, a beautiful loco and it stopped right next to me. Any idea which version of this would work on a 10 year old PC with 4 megs of RAM and Windows 7?
Thanks a lot Philip - that sounds really lovely! I'm pretty sure this wouldn't work well on a 10 year old system unfortunately - do you know what CPU and graphics card it uses??
Thanks for watching - Sam :)
@@SamsTrains Hi Sam. I understand my dinosaur PC cannot handle this but I was wondering about older version that I may be able to get cheap from ebay. My processor is 2 X YE4600 @2.40 Ghz and my video card is Nvidia 9600GS
Are there any good train simulators on the iPad, the last one I had was southern belle on the zx spectrum circa 1985 🤣
I'm not sure about that mate - I've never tried any myself! :O
Thanks for watching - Sam :)
Does train simulator 2020 have the ability to custom scenarios?
I only live a couple of miles from that route in Cumbria
That's fantastic - lovely isn't it?!:D
Thanks for watching - Sam :)
My first locomotive train set was the mainline steam Hornby train set in I got It when I was 9 and 11 years on I got 40 locos and 100s of rolling stock
Ooh blimey, that's quite a collection - do you still use your Mainline engine?? :D
Thanks for watching - Sam :)
@@SamsTrains unfortunately no it burnt-out my dad put loads of coaches on it and It could not take them I'm hoping to get It repaired after x mas
Only 2 days until Christmas and there is no snow in Chicago as of right now unfortunately
That's pretty sad - do you usually get snow in Chicago??
Thanks for watching - Sam :)
@@SamsTrains we usually do but this year is a warm year for some reason...
Have you ever heard of Train Sim World? It’s so fun And I love playing it! It’s with American Trains like Amtrak, CSX
Or GWR
Which isn’t an American
Yeah I've heard of it, I wish I could try it done day!! :D
Thanks for watching - Sam :)
Ah, back before we knew 2020 would be such a terrible year. I miss those days.
I know - me too :(
Thanks for watching - Sam :)
Merry Christmas
Merry Christmas David!
Sam :)
I know that this is not a hornby christmas vid but i did get the jubilee class loco
haha absolutely - hope you liked it mate! :D
Cheers,
Sam :)
Sam, it doesn't make sense if this route comes with the class 450. The class 450s are 3rd EMUs and this line is not electrified!
Ahh I see - can't have been that one then!! xD
Thanks for watching - Sam :)
the way you say leander is... lee-an-da.
You would have got the 158 with it as they are the most common dmu on that line
That makes sense - thanks for letting me know! :D
Cheers,
Sam :)
Can you review some oo9 narrowgauge steam locos by bachmann and heljan
Also can you review the heljan 1366 and the dj models 14xx
I'd love that - it would be fantastic to try some other gauges! :D
Thanks for watching - Sam :)
Coolest game ever!
(Well,for a train nerd like me anyway)
haha absolutely!! :D
There is the midland railway centre out for train sim on Vulcan Productions
Ooh that's amazing - I'd love to try that! :D
Sam'sTrains have a go sam, though there are quite a few requirements
My father was a railway driver for 47 years. He could drive 28 different engines. He would have found this interesting. A version from 2001 I bought for him he said didn't respond realistically.
Wow that's fantastic - thanks very much for sharing! I guess that settles it!
Thanks for watching - Sam :)
hello :)
merry christmas btw
Hello!! :D
Hi Sam hope your ok
Merry Christmas to you
Yes thanks Lewis, Merry Christmas to you too!! :D
Thanks for watching - Sam :)
Can you do a video on the dot cr 123 Lms crimson please
Take a look at the Minecraft mod Immersive Railroading - you could make a video about that! Have a great Christmas :D
I'd absolutely love that - great idea Sam! :D
Merry Christmas,
Sam :)
Hi sam u when u getting a peppercorn a2 blue peter its only in br green for ts 2020 I think it is made bye just trains
It was developed by DTG. However, Bossman Games released an expansion pack which includes all other members of the class.
I don't know about that - maybe I'll try it some time!! :D
Thanks for watching - Sam :)
@@SamsTrains No problem. Both are currently on sale, so now's as good a time as any to snap them up!
Have you ever ran a freight train in train sim? If not that could make for an interesting future episode.
I have done I think - check out my Grange video!! :D
Thanks for watching - Sam :)
Hi Sam on your video at the start I saw the portsmouth when will you do that on your channel
Ooh awesome - I'll try to do that next time maybe!! :D
Thanks for watching - Sam :)
@@SamsTrains I cannot wait to play TS2020 on my computer
It would be cool if 3583 bytes who is the creator of the Train Sim game on the app store and google play store would make a Train Simulator game but with British steam locomotives and also diesels! :P
That would be awesome actually - though I think these would struggle on mobile devices :(
Merry Christmas,
Sam :)
You should do Mallard on this route 😀
I'd love that!! :D