How Harley Should've Made The Dyna T-Sport - 2003 Club T-Sport Walk Around Kruesi Originals!
ฝัง
- เผยแพร่เมื่อ 5 ต.ค. 2024
- Support My Sponsors and Get Rad Gear: www.getlowered.... --- This is an affiliate link so all purchases support Jon's Moto Garage :)
Subscribe to my wife's channel: • Here's Why Moms SHOULD...
Follow Her on Instagram: @jackiesmotogarage
Follow me on instagram: @jonsmotogarage
Follow me on TikTok: tiktok.com/jonsmotogarage
You can support me on Patreon: / jonsmotogarage
Check Out @kruesioriginals TH-cam Page: / @kruesioriginals
Follow Kruesi Originals on Instagram: @kruesioriginals
How Harley Should've Made The Dyna T-Sport - 2003 Club T-Sport Walk Around Kruesi Originals!
Huge shout out to Ryan over at Kruesi Originals! Today we're bringing you a walk around of his 2003 anniversary edition Harley Davidson Dyna T-Sport. This bike is basically a complete custom build from the ground up (very little remains of the original t-sport). Ryan owns a shop here in Phoenix, AZ, that specializes in performance Harley builds. From basic maintenance to custom fabrication, they've got you covered! Definitely hit them up if you're in the area. And he can ride a bike with the best of them to top if off! Enjoy!
2003 dyna t-sport, harley davidson custom t-sport, club style dyna, club t sport build, how to skid plate harley davidson,
How Harley Should've Made It From The Factory - 2003 Dyna T-Sport Walk Around Kruesi Originals!
How Much I Make Doing TH-cam: • How Much Do Small YouT... How I Load My Motorcycles (Big Boy Ramps): • How To Load, Unload & ...
How To Ride on One Wheel: • How To Wheelie for Dum... Harley
One Wheel Riding: • Do NOT Wheelie Your Ha...
How To Buy Used Motorcycles: • How To Buy a Used Moto...
Parkour Clip: • Flipping Over My Super...
Club Style Dyna Street Bob Walk Around: • Club Style Harley Davi...
Gear I Use:
Lapel Mic w/GoPro Hero5 Connection (everything you need for audio setup): amzn.to/2Wzw6W1
Simpson Bandit Ghost Helmet: amzn.to/2Go1RL...
Hero 4: amzn.to/2t38USf
Fox Gloves: amzn.to/2D30OOj
Creative Commons - Attribution 3.0 Unported - CC BY 3.0 creativecommons....
Music promoted by Audio Library • Lights - Sappheiros (N... Mrs. Zazzara by Loxbeats / loxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0 creativecommons.... promoted by Audio Library • Mrs. Zazzara - Loxbeat...
#harleydyna #dynatsport #tsport #harleydavidson
![[LIVE] : ONE ลุมพินี 82 วันนี้!! คู่เอก | ยอดไอคิว vs อับดัลลาห์](http://i.ytimg.com/vi/hSsyTl_9bqs/mqdefault.jpg)
Shout out to Ryan over at Kruesi Originals! Give him a follow on IG: @kruesioriginals & YT: th-cam.com/channels/VfH05r-6x7mRyJnrboigtA.html
Heads up to my family friendly viewers: Ryan uses some colorful language. He offered to censor himself for the video, but I told him to be himself. He's a super rad dude and has made a huge impact on the local riding community. Thanks again, brotha!
he kinda looks like Hopper from stranger things
Can't even say the bikes name without grinning I love it
Lmao! It wasn't until I was editing the video that I figured it out. I was rollin in the floor laughing!
No kidding!!!!!...... That's awesome!...
I’ve been doin this since 2012 and unknown had it going first and that’s we’re I pick it up. I live right by the Wilmington and Long Beach port and that’s we’re I learn at. Shout out to everyone doing this before it became a thing!
Heck yeah! 🤘😎
Cool bike! Looks like they fix the typical shortcomings with fresh solutions. I love the pegs on that bike of his.
Got a few Kruesi things going on with my bike. He fixed up my lower triple tree I'm running their chain kit and he's worked on my bike when it was lame. He's definitely made me look at the Harley game way more differently
Heck yeah! They make some killer builds! 😎🤘🔥
I've met him before and he's one cool dude. I even got his kruesi sticker on my bike and helmet, Also the bike nights and events he throws are the dopest in phoenix!! Mad respect
Heck yeah! Legend status for sure! 🤘🔥
I know how much you hate cursing, but damn this dude is something else 🤣🤣🤣
Kick ass interview Jon, now I have another bad ass stunter to fallow just dosent get old. Thx bro.
Hecks yeah! Thanks for supporting the community! 🤘😎
I think the tall shocks with a DYNA bobber fender or a cut fender looks so cool,at first I didn't like the hight fender,but now I think it makes it look sportbike style cuz u can see the whole back tire,wicked cool
Just came across your videos! I’m extra hyped to see a dude from Az keep it up
Dude that's sick you were able to meet the man himself. I would be rocking one of his crash bars but I ride a sportster. Wish more company's would make parts for the sportsters. Too many don't consider them part of the Harley game.
Sporster bars are comin
@@kruesioriginals Hell yeah, let me know when I can get one, I'll be the first one to buy one.
Great interview Jon, probably my favorite video from you. Kruesi is an OG and knows the game well. Rock on brother and stay cool...
dude that guy was awesome. Good segment man, your channel rips!!!
Heck yeah! Thanks, brotha!
Great interview Jon. Loved to hear that young guys are getting into bikes in some form. Kewl dood. Sucked to hear about Works Performance though :(
Thanks, brotha! Ryan does a great job bridging the generations.
Live the clamshell faring too,it's my fav style
Wow, that skid plate at 11:56 ... just imagine what skill (and bravery) it takes to do that!
I have a set of 7/8th bars from an old kaw, im goin to run them now.
Adonaiyah Teemann can’t just run them. Need the proper risers for it.
@@ChrisSmoove77 they are on a kaw with risers
LOVE IT. That's where I wanna be in 10 years.
Awesome video brother!.... That motor in his bike is way better that these "m8" things Harley is doing now, in my humble opinion of course
good looks just subscribed such a rad dude , both you guys that is thanks jon !
Awesome video dude.....that dude is amazingly fun and super cool.....👍👍👍
Thanks, brotha! Yeah, he's an all around real rad dude.
Kruesi is the o.g. street beast.know this..
wow cool bike! I can't stop smiling over that bike!
I need a motor like that
Thanks for breaking down your bike build.
@ 6:04 that’s my style for sure 🤟🤟
K-bar saved my bike the first ride after I put them on
Heck yeah! I'll be installing one soon! 🤘🔥
Does he make crashbars for the new softail low riders?
Funny story, I wondered into Kruesi Originals a few week ago, instantly I was like a kid in a candy store starring at all the custom Harley’s asking questions.
I start in telling Ryan and Trent all my basic bitch bagger plans for my newly purchased 01 road glide nicely they listen to all my ideas. “Now looking back probably like “for f&@k sakes kid that’s some played out bullshit.”After finishing Ryan said “first bring in your bike in and I’ll check the engine and fluids before you go dropping any coin on a bad offer up buy.” I took this as a good sign. I’ve been to shops that start with your looking at 15 to 20k for any of my work. It wasn’t that was here. So I brought back my bike calmed down from my initial ADHD reaction and said forget everything I said before build me a bike the way you want I like what I see. Ryan said “yeaaah I was going to talk you out of all that other $h!t anyways.
Now in the process building a fresh Tsport inspired bagger or Tbagger once it’s finished? Just to name drop a few parts- Kraus, Fly bars, Racetech, RWD, Krusei chain drive conversion, Saddleman. It won’t all happen over night but in a day and age when everyone does the same thing and calls it custom I’m excited for something a little different Nice video Jon’s Moto garage.
Heck yeah! Spot on, brotha! Keep me posted on your build! I'd love to check that out once it rolls out of the shop! 🤘🔥
My dude🤘🏼🤘🏼
That’s my guy!! 🤣
That is a dream bike!
Hi bro beautiful machine impressive vid thanks 🖤🇦🇺😎👍
Legendary Jon
Arizona!
SMART FCKIN DUDE HE IS WHERE I WOULD GO AND GET MY DYNA BUILT
I'd create a poli plastic bolt on skid plate that attaches to that special fender that's replaceable
Kruesi Originals!!
Can they do anything about the death wobble on Dynas?
I'll ask him about that! I bet he knows all the ins and outs. The dude is a moto genius!
Check your neck bearings, I changed mine, greased with actual hi temp and not bullshit GAA, after that hit the front motor mount and I’m set. No wobble up to 105-110. Sputhe stabilizers or true track will cure it once those are good.
Awsome dude
Closed captions said “slurp slurp” for the whole video.
Cool bikes i like em all , hopefully these style paint jobs are just a fad and it dies out with the truck squatters. These paint jobs look great on chops , lowriders and led sleds , but on a daily bike, man i dont see it holding up.
That's deffinatley a Lakers fans dream dyna
any more info on the red bike? that bike is clean
I don't know why he had a blue rental handle bar pad,should have been purple to go with the theme
I wish I could wheelie
fxd 4ever baby
Check out a Sportster 1200s (sport)
Crazy you mention that cause Ryan was talking about a 1200s build he dide when I was at the shop. I'll have to look into em!
If Harley wanted to make money and potentially stay in business they should remake the FXR and also make it an affordable purchase......
What do you think about a iron 1200 for wheelies it is my first bike
Do a stage 4 on it
But on the real at least upgrade the clutch
I know its possible but haven't done it myself. There's a dude on ig who mobs the iron 1200 wheelies.
Check out timmay_603 on instagram. He shreds the iron 1200.
that_green 4.6 rather up grade to a bigger bike or do a hammer 1275 kit it’s stage 1 now
Quick question,what would be the difference of having 12 inch ape hangers,or having 12 inch risers,of your hand were in the same place
I think the risers (depending on brand) are more robust/sturdy for the stunting. But I've seen dudes ripping with ape hangers too. Also a style preference (club style).
@@JonsMotoGarage absolutley,,I love the club style too,I've seen guys with the club style front fairing,with some smaller 12 inch ape, not my cup of tea,just saying
Love your channel btw,,you picked up the wheelie thing quicker than I've seen anyone do,,ur a cool dude,,I'm easy coast(Boston) and I think the Cali scene is dope,my brother moved to la, and wants me to resettle,,I may,,but your a very athletic dude,the skating,the backflips,,u must be crushing the pussy out there bro,much respect
Make Harley great again.. so sick of all these fools on baggers with bandanas on their head giving us a bad name.
What shades are those?
Oh shit I thought that was the cop from stranger things lol
Que vuelta Jon? Que bolá?
Sweet scooter, but crashing is NoT CooL . .but on purpose ?💰
I'll give ya 5 k for it,,,,ya right,in my dreams
😍😍😍😍😍😍😍😍🇺🇸👍😎
🤘😜 🏍 🏁🏍️🏁🏍️🏁🏍️🏁🏍️🤘😜
Harley doesn’t like you or Dyna bro’s. They don’t like anything with stunting or “ performance riding” it means there bikes will be trashed and more warranty claims. They are about money and that’s it. Drag racing Harley guys and Harley boomers don’t like riding hard.
Performance bagger guys and stunners along with drag racers/ road racers are very different they are there own class of people.
Old men Harley guys don’t like any of them
They don’t like stunting either but they loved evil since he brought sales in his time
Ask me how that works
Garbage bikes from the Worst people!! HD will be dead in 10-years