Noopsyche K7 Pro V3: The Newest Reef Light On The Market!
ฝัง
- เผยแพร่เมื่อ 23 ก.ค. 2024
- Welcome today we are unboxing and taking a look at the New Noopsyche K7 V3 Reef LED Light. Skip ahead using the chapters below.
Chapters
Unboxing 00:00 - 09:45
Setup and Programing 09:45 - 17:22
Color Channels 17:22 - 20:05
Controller 20:05 - 22:27
Tank Install / Lighting Presets 22:27 -32:01
Subscribe to Simply Reefing Here:
/ simplyreefing
See more at:
/ simply_reefing
Music from SoundCloud
------- Cameras and Audio Used To Shoot This Video ------
Camera: Canon M50
Gimbal/Tripod: Feiyu G6 Plus
Mic: Boya MM1
-
This VIDEO was EDITED with Filmora 10 on a PC.
Copyright Information:
This video was shot and edited by Simply Reefing. Simply Reefing owns all intellectual property rights to this content.
make sure to take PAR measurements 1) with the flow off 2) with the proper immersion coefficient for your particular PAR meter and 3) to reports the values in the proper PAR units of micromols. This light undoubtedly does great on day one, right out of the box, but the real tale of the tape will be how bright it remains after one or two years of use.
I agree a long term review is something I plan too do on these lights.
I have been using the Pro II for almost 11 months now. I don't have any "difficult" SPS corals but I can say that my corals all love the light. I have digis, stylos, montis, and favias that have all shown significant growth over the last few months. Unfortunately I didn't test par when I installed the light at the beginning of this year so I don't have a baseline to compare it with. I'm running 100% on the blue channels and 35% white in the evening for "viewing pleasure" over a 70 gallon tall. Everything looks illuminated and the colors pop!
No. No time for all that
Clean setup and not default to work 👍
Awesome video and information.
Thank you
Looks good 👍
Thanks 👍
I have the k7 11 and love them. I am putting together a new tank and would like to buy these if the wattage were lower like the previous model. I like the look of having them spaced apart rather than having fewer lights with stronger wattage. Maybe If i were an sps person but I am a lps/softies kind of gal! I have a few lower wattage sps like branching cyphastrea, turbinaria and montipora!
Thanks for taking the time to show how the lights operate and how to use controller. I would be interested in seeing what par you get and if it matches description provided by Noopsyche.
I have these lights, I did not do a par recording video. I used a seneye 4.0.8 hub, compared readings with another user ook readings with a Apogee Quantum Flux MQ-200. Readings were very close. Her measurement 9.5 inches from light - surface reading @80% was 550. My lights are 8" above water @95% the surface was 1100. @9.5 inches away is where numbers lined up. Mine @80% read 595 below lens. 650 between the lenses. 26" below 240.
This was done on Reef2Reef forums. If you want the link I can provide it.
Thank you for your nice video @Aundre
Thank you too
how is the fan noise? at what power levels do they come on and how loud are the (for example compared to radions, which are very noisy to me)
Interesting. I like the spectrum options. I was hoping for a more Kessil like shimmer. I may have missed it if you mentioned it, but does it have timer/schedule capability? Also maybe it's the lights, but your birdsnest really looks like pocillopora to me. Is it a birds of paradise variety? Good review.
Yeah the shimmer is a unique mix depending on wave action. It does have a timer which I did not cover in this video it really was a live unboxing. That is a pocilopora if I give it with a lot of light then I get pink tips.
Nicer than a kessil shimmer, the newer kessils have gone to dense matrix and now they have lost the nice natural caustic lines and are just all over the place :)
Flow plays a part in those lines you see.
@@SimplyReefing i am so glad you didn’t go with the dodgy radion gen 5 too :) looking great mate
Pretty sure your “Birdsnest” is a pocillopora. If you see it pop up all over your tank that’s double confirmation 😅
Do you think this light will be sufficient for a 36x12x24 aquarium?
Yes I am currently running 2 over a 90 gallon breeder
Looks great! Would love the opportunity to try it out, see the results.
Good luck!
@@SimplyReefing Thanks!
Where’d your rock work go? Cool looking lights
The 150 was broken down and sold that why there was no rock.
K7 PRO III with App-controlled WiFi version is instock
this come with a hanging kit?
The set only comes with a tank mount.
Do you know how high I should put two over a 55 gallon?
Start around 9 inches from the surface and get a par meter to check after.
Do you still recommend this light ? I thinking about switching from RedSea 90s to the K7 Pro V3
It depends on the reason you want to switch.
Did you change it?
@@omerseymen4391 i switched to A8se, best choice :)
The lights shouldn't go anywhere near water without them going through a breaker anyway. Great review though 👍
Please explain are you referring to an electrical breaker or gfci.
@@SimplyReefing yeah both
ah ok the breakers I have on my panel are gfci breakers so I am safe there the outlets are a different story.
awesome lights, what s the price?🤩
$249
is it good for sps?
Yes it is ok for sps corals.
will you consider doing par reading with this light ? 😀
Yes I will be doing a par video on these lights
@@SimplyReefing im waiting!
I recieved the system and it didn’t work.Instead of replacing the lights they had me open the power box and I found a screw loose in the box that must’ve shorted out the box.They sent me a replacement box and when I hooked it up to the light it did not work so they sent me a circuit board to install. I installed it and the light didn’t work. When I asked for a refund or a working light they told me that I voided the warranty because I opened the light. I lost $169.99. When I asked to be paid for my labour I never received a reply.
I am sorry that this happened to you. Those power bricks carry a lot of power I am not sure why they just didn't send a replacement instead of having you open the box to then void the warranty. I would try them again and see if you can get this resolved.
@@SimplyReefing I have had a lot of exchanges with them and had PayPal involved who took the vendor side. Exchanges are with a Chinese agent who has a very limited knowledge of the English language
Fell asleep 10 seconds into the video and by the way I'm loving the long fingernails what's up with that I'm hoping that you're not a chef
Lol 🤫
Who the hell are you to judge???? Just a trouble maker!
Do fish say you play date and see what it says it with the game play play it and see it I can play
Yep! You sound like a kid! Fitting name! Your grammar sucks by the way! If you are going to be a rude trouble maker at least make sense and use proper grammar and punctuation!
Two things: 1) video pace and information download painfully slow. it would take this Reviewer 30 minutes to describe and show how to open a new jar of Jiff peanut butter. Rotfl. 2) if I were Noopysche USA I wouldn't appreciate the Reviewer that kept referring to the K7 V3s as the K3s. Credibility just got skimmed out.
Based on your comment do you personally have a youtube channel that you personally have posted videos to that I can get some tips from.
@@SimplyReefing people just love to be rude and criticize!