I must say- this is how you do a repair video. Step by step, no skipped parts. Although my dishwasher is slightly different (SHE68E05UC/01), the thorough explanation and good camera work/lighting/sound made the repair easy. Excellent job!
I had the same issue. Although you carried out the correct fix, I simply unscrewed the sump from the inside and removed the water spout. I then pressed down on the sump creating a gap enough to nozzle some clear silicone all around. Tightened up the sump screws and cleaned all the excess silicone and left for 24 hours. Works a dream. 2 years and counting and it’s done it’s job. Took me 30 minutes and I didn’t have to strip down and rebuild the whole unit. This comment is just for others who may feel they want to save time and €£$¥. Great video though, well impressed 👍🏻
Hmmm, I think this is a good idea. My machine is 9 years old and at some point it will be better to replace than repair. Silicone would have kept it going and ultimately I will be replacing it at the next breakdown. With my sump replacement done, I feel like I need to squeeze another 5 years out of it!
Also Bosch make a gasket seal kit fix part 12005744 to fix E15. Buy it directly from Bosch (cheap like $20) and solves the problem. Even comes with a little sticker to add to the door lip to show it's had the retrofix applied. It can be installed without disassembly ... but nice to take it apart for cleaning as the soap residue is everywhere ... I also ordered a new float as the old one had rotted away.
As a repairer I don’t use the seal kit. It is impossible to properly clean everything with out taking the sump off. If the surfaces aren’t cleaned properly, very often the dishwasher start to leak very shortly after the seal replacement. Those seals are only usable when the machine is nearly brand new and does not have years of limescale and dirt build up.
Thank you so much for putting this repair video together - it's one of best I've ever come across. All the little tips and details sprinkled through it were invaluable, such as not stretching the o-rings when cleaning and using rinse aid to ease them on. Great job!
I was able to repair the circulation pump watching your video! Your video has what others all fail to show or explain. I really appreciate all the efforts made into this video.
Great, clear instructions. Looked for ages befor stumbling on this Helped enormously My code was E04, but since stripping, found water from the leaking sump seal had burned out the heater. The ony downside is my other half is dissapointed she is now not getting a new dishwasher after I fixed the existing one 😁
Thank you so much. These are the kinds of challenges that few people dare to take on. But with a guide like you, I would dare to take up this challenge. Thanks again.
Is the heat pump a likely culprit if sump replacement doesn't fix the water buildup? I just replaced the sump and still getting water. Can't see where it's coming from.
I had a problem with the water diverter, the white plastic inlet/outlet was totally falling apart. Thanks to this marvelous video, I succeeded in repairing it myself. Thank you very, very much!
What a fabulous tutorial, every step I need to replace my sump....absolutely brilliant. Thank you so much for posting such a helpful video, all I have to do now is view it a few more times , then get on with the repair. Bravo Sir.
Hi there. Thanks so much for this video. I had a leak and the resulting error 15 on my Bosch dishwasher and needed to replace the sump. I got the part easily from Bosch but without your video I would have completely failed on this quite complex task. Your demonstration and verbal instructions were clear, easily followed and complete, My dishwasher is back working as it should be. Great job!
I watched your video while repairing our dishwasher, then came here to the comments to thank you: Thanks very much. An incredibly instructive video with all the information needed. one of the best repair videos I've seen.
Brilliant guide. Not what I’d want to be doing on a Friday night, but thanks to this video I’ve just slid it back into place and it’s running a cycle now. No screws left over either, bonus!
Thank you for this content. I replaced my sump, wash/heat pump and drain pump today using your video for my Bosch (SHE7ER55UC/50). No hiccups or anything. This video is super comprehensive, I can't really think of a way to improve it.
I have SMU68M05AU/23 and had E24 error. I ignored it and over the years, it developed into another error, E15. I stumbled upon this video thinking that "I'll give it a crack to fix it. What do I have to lose?" I ordered a new sump and a drain pump and followed the instructions of this video, step by step. To my surprise, this video is very thorough and idiot-proof. I was able to fix my issues and saved labour and outcall costs. I just wanted to say thank you so much for your video. My dishwasher is working like a new machine without any error at all. A couple of suggestions to those who are who scared to try fixing their machine using this instructions: 1. Follow the instructions, step by step, slowly 2. Use food colouring to locate where your leak is (E15 error). 3. Label the bloody connectors and cables with painter's sticky tape so you won't get confused which connector goes to which plug (i.e.: 1, 2 ,3, etc) 4. Be VERY delicate and careful when pulling out the electrical connectors as they're quite fragile.
Mate, this is the best how to fix something video I have ever seen. Followed your instructions and it worked perfectly. Had my bosch serie 6 for 2 years and 4 months and the sump started leaking. Was so annoyed it was just out of warranty. This video made something which looks really hard to do relatively easy. You saved me heaps mate, thanks very much.
Excellent video! I just stripped our NEF built-in DW after it gave repeated E:15's. During the Chef cycle (only for some reason!) after I frigged the float switch it leaked about 250mls per cycle. It did not leak on other cycles at all. When I stripped it, there was a serious build up of limescale on the seal of the diverter assembly. I scrubbed it all out, reassembled and everything now fixed. Thanks again for making such a detailed video!
Great video mate, I have to replace my recirculation pump and couldn't have done it properly without this vid. I think I'd have ended up with some broken plastic if I was left to my own devices. Thanks!
You a rock star. My hero. Thank you. Followed your careful directions. Couldn’t find the fault. But just getting right down to the core, cleaning things and outputting it back together - it’s working again and I didn’t have to call a tech. Thank you!
Very thorough Brilliant video showing how to get in and out of the dishwasher innards... Exactly what you need to replace the sump with the confidence that you're not going to snap anything on the way in or end up with a spare part or disconnect after assembly Thanks very much
Very very good video. I only had to replace the recirc/heat pump, but this gave all the needed and would-be-tricky steps for how to get the thing apart and back together. I now have a working dishwasher for just the cost of the pump and a couple hours time. Thanks!
This was by far the most detailed and easy to follow instructions. I had two separate service providers come to my house to see if they could fix it. Neither was able to do it. I did my research and came across your video. You did an amazing job! Well done and thank you. My dishwasher is working great now and no Leaks at all. Thank you again!
Had to replace my heat pump and have used your EXCELLENT VIDEO to do the job, in fact watched a few times to get it right ,got to be one of the best videos on Bosch dishwashers !!
Excellent video, very well done. You gave clear instructions, pointing at the right places of attention and showed that very clearly on camera. I had the E15 on my Siemens machine but exactly the same interior. I already had put in the silicone tubing as available as a repair kit. I understand that after it has put in and it goes back to its ring shape and the screws are tightened, it provides this extra seal inside the original black seal by providing extra pressure. I then used your video how to access the water retention area with the float and the switch. I completely cleaned and dried it out and after that I put everything together. After switching the machine on I had no more E15 so clearly I had succes with the silicone, pffft. Thank you for putting out this video, I will save the link should I need it in the future.
Thank you so much for explaining how to remove the base. I don't think I would ever have found those hidden tabs under the rope guides and I needed to remove the base to replace the zeolite heater on my dishwasher. It was corroded to hell and created some earth leakage which erroneously gets reported as a communication error at the start of the drying cycle.
Really informative and well made. I have a similar leak and wondered why just the seal around the top of the sump (where the water was leaking from) couldn't be replaced, rather than the whole sump - which was a lot more effort Thanks again for a great video
Top notch guide. Apart from colour my machine is just about identical so it was easy to follow every step. Heater pump and sump replaced. Thanks, from the other side of the planet.
Thanks. Replaced my sump today using your instructions. Nothing unexpected, no problems, no breakages, no leaks afterwards; took it apart and reassembled it. Machine is happily sloshing away in the kitchen now. For me, I had to get some limescale gel because the mating face for the sump was scaled up from the leak and I didn't want to scrape it. Thanks again.
@@jeffreyschmidt3997 I left the whole day to do it, but it was done in half the time even including the limescale treatment. I gave myself loads of time because I expected issues. The machine is still working fine with no leaks - a year later and used daily. A very worthwhile repair.
I took apart my machine multiple times. First to fix a defective head pump and after that because it was leaking water. Tried to fix it with some heat resistant kit. Did not work :-(. So now I'm going to install the sump part like you did in this video. And indeed the metal part is sharp. I cut my finger twice on it... Love the very informative video that you made!
Brilliant video. Ive been searching for how to pull apart a bosch dishwasher for ages. E15 error like most, but other searches just go through removing the code and not sorting out the root cause.
You’ve done it beautifully! You know, I’m really missing the bottom access door on older Bosch generation, it was an easy yet considerably quick access to the sump area.
@@ApplianceFault thanks for sharing with us! Yes you’re right it was so convenient to have a quick access to the underneath. Bosch makes really good dishwashers (yours is actually a pretty good model and was made in Germany), actually Bosch and Miele are the best ones in my opinion.
Excellent video but can I suggest that before you replace your sump/seal, try just tightening the four screws shown @0:51. Take care not to overtighten. I did this and it solved my leak which had been giving me e15 for the past few years. I had been foolishly doing the 'tilt' workaround but this video has taught me why that was such a bad idea.
Owen, you have no idea how grateful this internet stranger is to you! You just save me a TON of work. Not to detract from the amazing step by step video, but ya, my screws weren’t tight, problem solved, lol. THANK YOU!
Excellent video. I have replaced the same part in my Siemens dishwasher. It's a different model, and built in, but on the inside it looks exactly the same.
I don't think that I could add anything else in what all the others have already written! This video is an artwork...a masterpiece in its kind!!! We are all so thankful to the creator of this video. I have only a simple question. The main (four) original screws of the sump had an extra black seal inside providing extra pressure. Now, after all these years this extra seal doesn't exist (got crumbled)...How can we secure these screws in order not to have leakage from these four holes (screws)???
Majestic! This is exactly the part I need to replace on the model dishwasher I have. Thank you so much. This is such a comprehensive video, given me the confidence to do it myself. I've ordered the part now! Edit: Part fitted and fully working. I also had to replace the drain pump as it got some water in when I flipped it. So a very important point about making sure all the leaked water is sponged up. Do you have paypal for donations?
Great instructional video. I’ve checked my inlet and return lines, drain pipe motor and I still get a check water light. No visible water marks. I’ve taken the pump out and cleaned it. No obstruction. What could be another problem stopping my machine mid wash? Any help is greatly appreciated
Mice. I need to get into the base of my washer to remedy damage caused by rodents. I've already replaced the reed switch on the water inlet but I can see that the polystyrene float has been eaten! There is sign of leakage too. Thanks for showing me how to get in there!
Hi, thanks for your excellent video. Unfortunately I got a qube of gray plastic block left over that fell out when removing the bottom base. Do you happen to know what it's for? I have a bosch dishwasher without counter weight designed for installation under a counter top.
Awesome video and thanks for sharing your extended expertises. However this job will be too much for me and if you know a technician who can do it for me in Sydney Inner West, please let me know. Thank you.
Hey mate, thanks for this. Can you pleae tell me, if you replace the sump and still get water build-up in the bottom, what is the next likely cause to go for?
My bosch series 4 has startet to leak from the exact same gasket. Bought it in 2017 so not that "old" I might have to try this to give it a longer life span 😊
Super video. Exactly the same model as we have. Ours is not heating the water and other videos say it's probably the relay on the control board. From you I can see how to get the top and sides off. Does the control unit come out of the side without turning upside down and removing the base?
At great effort we've taken everything apart, following your video, but it wasn't quite the same as yours. On each side was some kind of plastic water or vent air processing system. We removed the motor and where the heater wires connect we can see one of the heater tracks is burnt out. The day the dishwasher stopped heating it was set to run in the early morning, and at 05:20 the house RCD tripped out. Now we know why. I can see a new pump+heater is £125 but as it's 10 years old I think we'll get a new dishwasher.
great step by step thankyou, i am an ex tv repairman and need to fix our unit. i have a series 8 (looks the same inside) that has "fault no communication" on the top screen and only apears near the end of cycle only somtimes and if i open door and turn off for 20min i can turn it back on and it resumes, i was thinking of replacing the heat pump or the drying fan for the zeolite, would i be on the right track? sadly i cant find service manual anywhere
Very interesting seeing the disassembly. What did you do with the water in the plastic labyrinth type reservoirs on the sides, and in the salt reservoir, before you turned it upside down?
Sorry slow reply. On this one the side container was empty but the salt one was full. I usually leave the water in those containers though. They are fully sealed and operated by solenoids to release the water when the dishwasher requires it.
very good, informative video, thanks i just replaced the sump on our 9 year old siemens , as it was beginning to leak. unfortunately now once is powered back on the control touch buttons and led indicators on the top of the door stopped working( lights on inside the machine) , i checked all the wiring and connections seems to be intact , no burn marks on the control boards. any ideas / advice what else to check ?
sometimes a wire can (unvisibily) get loose from the connectors. I managed to pry the connector open, re-insert the wire and clamp the connector together again. It did the job. A multimeter comes in handy to test the wires running from one connector to the other. In your case I would test the wires and connectors going to the affected controlls.
I must say- this is how you do a repair video. Step by step, no skipped parts. Although my dishwasher is slightly different (SHE68E05UC/01), the thorough explanation and good camera work/lighting/sound made the repair easy. Excellent job!
I had the same issue. Although you carried out the correct fix, I simply unscrewed the sump from the inside and removed the water spout. I then pressed down on the sump creating a gap enough to nozzle some clear silicone all around. Tightened up the sump screws and cleaned all the excess silicone and left for 24 hours. Works a dream. 2 years and counting and it’s done it’s job. Took me 30 minutes and I didn’t have to strip down and rebuild the whole unit. This comment is just for others who may feel they want to save time and €£$¥. Great video though, well impressed 👍🏻
Hmmm, I think this is a good idea. My machine is 9 years old and at some point it will be better to replace than repair. Silicone would have kept it going and ultimately I will be replacing it at the next breakdown. With my sump replacement done, I feel like I need to squeeze another 5 years out of it!
Also Bosch make a gasket seal kit fix part 12005744 to fix E15. Buy it directly from Bosch (cheap like $20) and solves the problem. Even comes with a little sticker to add to the door lip to show it's had the retrofix applied. It can be installed without disassembly ... but nice to take it apart for cleaning as the soap residue is everywhere ... I also ordered a new float as the old one had rotted away.
As a repairer I don’t use the seal kit. It is impossible to properly clean everything with out taking the sump off. If the surfaces aren’t cleaned properly, very often the dishwasher start to leak very shortly after the seal replacement. Those seals are only usable when the machine is nearly brand new and does not have years of limescale and dirt build up.
I was tempted by a similar sort of bodge... But, following this excellent video, I'm 100% confident the leak is now fixed
Thank you so much for putting this repair video together - it's one of best I've ever come across. All the little tips and details sprinkled through it were invaluable, such as not stretching the o-rings when cleaning and using rinse aid to ease them on. Great job!
I was able to repair the circulation pump watching your video! Your video has what others all fail to show or explain. I really appreciate all the efforts made into this video.
Great, clear instructions.
Looked for ages befor stumbling on this
Helped enormously
My code was E04, but since stripping, found water from the leaking sump seal had burned out the heater.
The ony downside is my other half is dissapointed she is now not getting a new dishwasher after I fixed the existing one 😁
Thank you so much.
These are the kinds of challenges that few people dare to take on.
But with a guide like you, I would dare to take up this challenge. Thanks again.
My fault was actually the heat pump but this is the best repair video I have ever seen and made the job very easy to sort - excellent work thanks
Is the heat pump a likely culprit if sump replacement doesn't fix the water buildup? I just replaced the sump and still getting water. Can't see where it's coming from.
I had a problem with the water diverter, the white plastic inlet/outlet was totally falling apart. Thanks to this marvelous video, I succeeded in repairing it myself. Thank you very, very much!
What a fabulous tutorial, every step I need to replace my sump....absolutely brilliant. Thank you so much for posting such a helpful video, all I have to do now is view it a few more times , then get on with the repair. Bravo Sir.
Hi there. Thanks so much for this video. I had a leak and the resulting error 15 on my Bosch dishwasher and needed to replace the sump. I got the part easily from Bosch but without your video I would have completely failed on this quite complex task. Your demonstration and verbal instructions were clear, easily followed and complete, My dishwasher is back working as it should be.
Great job!
I watched your video while repairing our dishwasher, then came here to the comments to thank you: Thanks very much. An incredibly instructive video with all the information needed. one of the best repair videos I've seen.
Brilliant guide. Not what I’d want to be doing on a Friday night, but thanks to this video I’ve just slid it back into place and it’s running a cycle now. No screws left over either, bonus!
Thank you for this content. I replaced my sump, wash/heat pump and drain pump today using your video for my Bosch (SHE7ER55UC/50). No hiccups or anything. This video is super comprehensive, I can't really think of a way to improve it.
I have SMU68M05AU/23 and had E24 error. I ignored it and over the years, it developed into another error, E15. I stumbled upon this video thinking that "I'll give it a crack to fix it. What do I have to lose?" I ordered a new sump and a drain pump and followed the instructions of this video, step by step.
To my surprise, this video is very thorough and idiot-proof. I was able to fix my issues and saved labour and outcall costs. I just wanted to say thank you so much for your video. My dishwasher is working like a new machine without any error at all.
A couple of suggestions to those who are who scared to try fixing their machine using this instructions:
1. Follow the instructions, step by step, slowly
2. Use food colouring to locate where your leak is (E15 error).
3. Label the bloody connectors and cables with painter's sticky tape so you won't get confused which connector goes to which plug (i.e.: 1, 2 ,3, etc)
4. Be VERY delicate and careful when pulling out the electrical connectors as they're quite fragile.
Mate, this is the best how to fix something video I have ever seen. Followed your instructions and it worked perfectly. Had my bosch serie 6 for 2 years and 4 months and the sump started leaking. Was so annoyed it was just out of warranty. This video made something which looks really hard to do relatively easy. You saved me heaps mate, thanks very much.
Probably one of the better repair videos I've ever been lucky enough to find, you've saved me so much trouble - thank you!
Excellent video, I’ve just successfully fixed my sump leak , couldn’t have done it without this video 👍
Excellent video! I just stripped our NEF built-in DW after it gave repeated E:15's. During the Chef cycle (only for some reason!) after I frigged the float switch it leaked about 250mls per cycle. It did not leak on other cycles at all. When I stripped it, there was a serious build up of limescale on the seal of the diverter assembly. I scrubbed it all out, reassembled and everything now fixed. Thanks again for making such a detailed video!
Great video mate, I have to replace my recirculation pump and couldn't have done it properly without this vid. I think I'd have ended up with some broken plastic if I was left to my own devices. Thanks!
You a rock star. My hero. Thank you. Followed your careful directions. Couldn’t find the fault. But just getting right down to the core, cleaning things and outputting it back together - it’s working again and I didn’t have to call a tech. Thank you!
Very thorough
Brilliant video showing how to get in and out of the dishwasher innards... Exactly what you need to replace the sump with the confidence that you're not going to snap anything on the way in or end up with a spare part or disconnect after assembly
Thanks very much
Very very good video. I only had to replace the recirc/heat pump, but this gave all the needed and would-be-tricky steps for how to get the thing apart and back together. I now have a working dishwasher for just the cost of the pump and a couple hours time. Thanks!
This was by far the most detailed and easy to follow instructions. I had two separate service providers come to my house to see if they could fix it. Neither was able to do it. I did my research and came across your video. You did an amazing job! Well done and thank you. My dishwasher is working great now and no Leaks at all. Thank you again!
Had to replace my heat pump and have used your EXCELLENT VIDEO to do the job, in fact watched a few times to get it right ,got to be one of the best videos on Bosch dishwashers !!
Really good run through on the process. It's very involved but this video show all the steps very clearly. Thanks for making the video.
Thank you very much for clear instruction. I was able to complete the replacement with confidence...and no extra parts were leftover. A success!
Excellent video, very well done. You gave clear instructions, pointing at the right places of attention and showed that very clearly on camera. I had the E15 on my Siemens machine but exactly the same interior. I already had put in the silicone tubing as available as a repair kit. I understand that after it has put in and it goes back to its ring shape and the screws are tightened, it provides this extra seal inside the original black seal by providing extra pressure. I then used your video how to access the water retention area with the float and the switch. I completely cleaned and dried it out and after that I put everything together. After switching the machine on I had no more E15 so clearly I had succes with the silicone, pffft. Thank you for putting out this video, I will save the link should I need it in the future.
this is the best video ever. I ordered the part and the control panel and fitted them myself thanks to you. You are amazing
Thank you so much for explaining how to remove the base. I don't think I would ever have found those hidden tabs under the rope guides and I needed to remove the base to replace the zeolite heater on my dishwasher. It was corroded to hell and created some earth leakage which erroneously gets reported as a communication error at the start of the drying cycle.
Congratulations for such a complete and well explained tutorial. Excellent job.
Wow! That is like rebuilding the whole thing for a new pump. Good job teaching.
Really informative and well made. I have a similar leak and wondered why just the seal around the top of the sump (where the water was leaking from) couldn't be replaced, rather than the whole sump - which was a lot more effort
Thanks again for a great video
You’re welcome. Glad you liked the video.
Thank you for watching
i was wondering as well??? maybe with the heat the sump is warp and the whole need to be changed??
Top video, very helpful. Had an E15 fault for a while, all sorted now with a new sump (£40) fitted. Thanks!
How long did it take to perform the repair?
Top notch guide. Apart from colour my machine is just about identical so it was easy to follow every step. Heater pump and sump replaced. Thanks, from the other side of the planet.
Thanks. Replaced my sump today using your instructions. Nothing unexpected, no problems, no breakages, no leaks afterwards; took it apart and reassembled it.
Machine is happily sloshing away in the kitchen now. For me, I had to get some limescale gel because the mating face for the sump was scaled up from the leak and I didn't want to scrape it.
Thanks again.
You're welcome.
Well done on the repair, good to hear that the video is useful.
Thank you for watching
How long did it take to perform the repair?
@@jeffreyschmidt3997 I left the whole day to do it, but it was done in half the time even including the limescale treatment. I gave myself loads of time because I expected issues. The machine is still working fine with no leaks - a year later and used daily. A very worthwhile repair.
@@julianwilson5468 thanks for the speedy reply! Great to know :)
I used this video to fix the same problem. Saved lots of money! Thanks for doing this video!! Excellent!
Cheers brother, excellent video. dishwasher up and running again with minimal swearing. Appreciate you sharing your knowledge.
I took apart my machine multiple times. First to fix a defective head pump and after that because it was leaking water. Tried to fix it with some heat resistant kit. Did not work :-(. So now I'm going to install the sump part like you did in this video. And indeed the metal part is sharp. I cut my finger twice on it... Love the very informative video that you made!
Brilliant video. Ive been searching for how to pull apart a bosch dishwasher for ages. E15 error like most, but other searches just go through removing the code and not sorting out the root cause.
Turned out to be the plastic shroud to the pump inlet had dislodged. Hope this helps someone with the same problem.
You’ve done it beautifully! You know, I’m really missing the bottom access door on older Bosch generation, it was an easy yet considerably quick access to the sump area.
Thank you. Glad you liked the video.
Agree, dishwasher with bottom access/removable pan are so much easier and faster to repair.
@@ApplianceFault thanks for sharing with us! Yes you’re right it was so convenient to have a quick access to the underneath. Bosch makes really good dishwashers (yours is actually a pretty good model and was made in Germany), actually Bosch and Miele are the best ones in my opinion.
thank you so much for all this and for your time ...the best video ever on this topic
Excellent video but can I suggest that before you replace your sump/seal, try just tightening the four screws shown @0:51. Take care not to overtighten. I did this and it solved my leak which had been giving me e15 for the past few years. I had been foolishly doing the 'tilt' workaround but this video has taught me why that was such a bad idea.
Owen, you have no idea how grateful this internet stranger is to you! You just save me a TON of work. Not to detract from the amazing step by step video, but ya, my screws weren’t tight, problem solved, lol. THANK YOU!
Thanks for all the little tips and tricks, huge help!
Your a great Tech! I wish I could ride along and learn from you. I just got into appliance repair.
I echo many of the comments. You have done an excellent job in compiling this tutorial. Thank you.
Very well done and comprehensive instructions. Thankyou
Excellent video, clear and great explanation
this video helped me solve my leaking e15 problem and saved me $1000! thank you!
So good, I just followed step by step. Thanks for posting. 👊
Thank you! Just fixed my dishwasher E15 following disassembly front door manual and drying it with towel.
Excellent video, no short cuts perfect for the DIYer
Thank you. Glad you liked the video. Thank you for watching
Very professional and helpful
Thanks
Thanks for making such a brilliant video!
Excellent video. I have replaced the same part in my Siemens dishwasher. It's a different model, and built in, but on the inside it looks exactly the same.
Best TH-cam Repair Video i have watched
Thanks mate, great instructions no problems and you saved me a fortune.👍
Very difficult to do, but very usefull video. Thank you.
Thanks a lot. I took apart the dishwasher.
Now I need to assemble the dishwasher back together.
Thank you very much for sharing.
Precisely what I needed to fix up our dishwasher
AWESOME, absolutely complete, video!!! Thanks very much!
Thanks a million. I had a hard time removing the bottom base. 🙏
thanks for this video! you saved my day, cheers mate!
That is very helpful. Thank you very much.
The best repair video. 🥇
Thank you, this was a really good help.
You, sir, are a lifesaver!! Thanks alot :) :) :)
Thanks a lot. Very good job. This video is include very detail technical knowhow.
Thanks for the video, fixed mine Bosch dishwasher error E15 to with the repair set silicon o-ring.
You’re welcome.
Well done on the repair.
Thank you for watching
Great video, thanks for the help!
Best tutorial ever!!
great video! Thank you.
Very good video, thank you!
You are a hero. THX!
Perfect video.thank you very much.
Best repair video. Tnx.
fantastic video! thanks
Good job. I have a Thermador, but it is basically the same. Thanks.
I don't think that I could add anything else in what all the others have already written! This video is an artwork...a masterpiece in its kind!!! We are all so thankful to the creator of this video. I have only a simple question. The main (four) original screws of the sump had an extra black seal inside providing extra pressure. Now, after all these years this extra seal doesn't exist (got crumbled)...How can we secure these screws in order not to have leakage from these four holes (screws)???
Thanks! Very helpful.
tankyou for your training
Brilliant - well done👍👍
Thank you for your help
Very very good thanke you
Majestic! This is exactly the part I need to replace on the model dishwasher I have. Thank you so much. This is such a comprehensive video, given me the confidence to do it myself. I've ordered the part now!
Edit: Part fitted and fully working. I also had to replace the drain pump as it got some water in when I flipped it. So a very important point about making sure all the leaked water is sponged up. Do you have paypal for donations?
Excellent video
Great instructional video.
I’ve checked my inlet and return lines, drain pipe motor and I still get a check water light. No visible water marks. I’ve taken the pump out and cleaned it. No obstruction. What could be another problem stopping my machine mid wash?
Any help is greatly appreciated
Mice. I need to get into the base of my washer to remedy damage caused by rodents. I've already replaced the reed switch on the water inlet but I can see that the polystyrene float has been eaten! There is sign of leakage too. Thanks for showing me how to get in there!
very helpful
Thanks so much for sharing. #RightToRepair
You’re welcome.
Thank you for watching
SUPERB FANTASTIC
Hi, thanks for your excellent video. Unfortunately I got a qube of gray plastic block left over that fell out when removing the bottom base. Do you happen to know what it's for? I have a bosch dishwasher without counter weight designed for installation under a counter top.
Awesome video and thanks for sharing your extended expertises. However this job will be too much for me and if you know a technician who can do it for me in Sydney Inner West, please let me know. Thank you.
Thank you
Hey mate, thanks for this. Can you pleae tell me, if you replace the sump and still get water build-up in the bottom, what is the next likely cause to go for?
Good one mate, there's a sump seal kit available to fix the sump seal issue
My bosch series 4 has startet to leak from the exact same gasket. Bought it in 2017 so not that "old" I might have to try this to give it a longer life span 😊
Super video. Exactly the same model as we have. Ours is not heating the water and other videos say it's probably the relay on the control board. From you I can see how to get the top and sides off. Does the control unit come out of the side without turning upside down and removing the base?
At great effort we've taken everything apart, following your video, but it wasn't quite the same as yours. On each side was some kind of plastic water or vent air processing system. We removed the motor and where the heater wires connect we can see one of the heater tracks is burnt out. The day the dishwasher stopped heating it was set to run in the early morning, and at 05:20 the house RCD tripped out. Now we know why. I can see a new pump+heater is £125 but as it's 10 years old I think we'll get a new dishwasher.
great step by step thankyou, i am an ex tv repairman and need to fix our unit.
i have a series 8 (looks the same inside) that has "fault no communication" on the top screen and only apears near the end of cycle only somtimes and if i open door and turn off for 20min i can turn it back on and it resumes, i was thinking of replacing the heat pump or the drying fan for the zeolite, would i be on the right track? sadly i cant find service manual anywhere
Very interesting seeing the disassembly. What did you do with the water in the plastic labyrinth type reservoirs on the sides, and in the salt reservoir, before you turned it upside down?
Sorry slow reply. On this one the side container was empty but the salt one was full. I usually leave the water in those containers though. They are fully sealed and operated by solenoids to release the water when the dishwasher requires it.
very good, informative video, thanks
i just replaced the sump on our 9 year old siemens , as it was beginning to leak.
unfortunately now once is powered back on the control touch buttons and led indicators on the top of the door stopped working( lights on inside the machine) , i checked all the wiring and connections seems to be intact , no burn marks on the control boards. any ideas / advice what else to check ?
sometimes a wire can (unvisibily) get loose from the connectors.
I managed to pry the connector open, re-insert the wire and clamp the connector together again. It did the job.
A multimeter comes in handy to test the wires running from one connector to the other.
In your case I would test the wires and connectors going to the affected controlls.