You'll immediately regret it. This thing makes no power. I can't understand why they didn't just make it direct drive. This thing has 2 gear boxes now so the first gearbox is going to have to get the second one up to speed by shifting through all the bikes gears before the other one can shift into second and you'll need to shift all the bike gears back down to compensate for the now larger gear ratio before you can attempt to accelerate again and by that time your rpms have severely dropped and you'll have to start all over again. This make no power, and has zero speed. You might be able to go through all 24 gears if you go downhill and let gravity do everything.
I just came across your project! I am currently putting a 1100cc motorcycle engine in my toro Groundsmaster snowblower. I am going with hydraulic drive though.
Except they're not going to select any of the gears from the bike engine because they put a gearbox in the way of the engines selector shaft, that was just clutch drag turning the output shafts did you notice he stopped it with his hands 🤣
I love the rubber welding gloves, feels great when it gets melted to your skin.. ask me how I know.. also crank that wire speed up until it's cackling smooth like frying oil wait what you put a gearbox on a gearbox so you can shift while you shift?
Мы сделали коробку для мотора с коробкой что бы ты мог переключать коробку когда переключаешь коробку) искры в карбы летят прям) кулибины. Сварочный не варит) за то кардан серебристый красивый 😀👍👍
Lol even with no gas that wire speed needs turned up. but hey to each is there own. You just might get a lot of criticism from the pros and/or amateurs.
we're wearing always flip-flops in our tropical areas !! walking, cooking, even at job time, night and day and at mechanics too, not a comedy but a way of life bro !
Sir it's awesome project ,can u tell me what bike engine and which car gear box u have used for do it because I am planing to do the same with Royal Enfield and Nissan Datsun go
From the local resources you have completed a great project... How many gears are there now...😆👍 Well done...be proud of yourselves and l hope the bike clutch lasts👍👍👍
At least 4x4=16 gears but could be as many as 6x6=36 gears 😂. Cant wait to see end of part 2 or beginning of part 3 when they realize they need 2 SEPARATE CLUTCHES. Only way around it is to lock the driven gearbox into a single gear. Lmao
Listen to all the welding experts saying, turn up the wire. Lmao. A mig welder spits like that when the wire is turned up too much or the surface isn’t clean. The wire doesn’t have the chance to melt into the puddle so it spits all over the place. Either the wire feed turned down or heat turned up.
Seems like the only benefit would be reverse, I would rather go with a reverse gearbox and keep the sequential if that's the case. If reverse isn't needed, then I would just go driveshaft-spline 🤔
That's set up is not meant to shift both of those transmissions while driving obviously. The bike engin is for shifting gears the transmission for selecting a gear ratio for your proper terrain at hand .
Do you think that something similar could be done with a Hayabusa engine? I would like to put a high peRoadster. (400HP +) Hayabusa into a lightweight roadster. Thanks in advance for any and all thoughts, advice, opinions, or answers.
![[TH] VCT Pacific Stage 2 - Week 4 Day 1 // PRX vs RRQ | GE vs GEN](http://i.ytimg.com/vi/iIi2_04jGr0/mqdefault.jpg)
Good skills, but I'm honestly more impressed by their ability to cut, grind and weld while wearing sandals
I be more impressed if he knew how to weld.
nothing special in that :D i do it quite often. freaking hot here in thailand.
@@mrkhainuui Just annoying when chipping slag off weld and it goes between the toes.
At least they were wearing gloves. 🙄🤣🤣
I do it in shorts and flip flops I'm in California
Good work guys I'm intrigued was hoping to get a part two and a continuation until the finished creation 🤷🏽♂️
Lots of respect considering what part of the world you live, and possibly what little you have, you make the best of it.
Best DIY EVER ♥
Excuse me? You might wanna re word your comment
@@thebear6529 why for a 6th world country your doing good.
@@thebear6529 you friggen people!
@@ambread1 atleast in their world they are not chlidrens killing anothers childrens at schoool , and not homeless people using cocaine all day.
I like the technique of directly building off another component instead of running bacwards and forwards with a pen:)
The projects we come up with because the junk is laying around. Useless engineering, great entertainment.
Esse foi um projeto perfeito, um dia irei conhecer vocês pessoalmente... forte abraço!
Excellent for trail buggy, Pretty cool 💡.
Nice job guys im loving what I'm seeing
Love there safety boots i just finished work safety course lol watching these guys lol 😆
This is actually genius! Brilliant work brothers! 👏🏻👏🏻👏🏻
That is a smart approach guys. Good work.
Good day all of you sir. You are so helpful to our people..thank you sir to you video.👏👏👏👏
Muito Bom, um Abraço do Brasil !
Mano parabéns ótimo projeto só regular direitinho a Mig/Mag na hora de solda
Please turn your wire speed up a bit, you'll get much cleaner and better lasting welds.
I don't weld yet but, have been watching videos as I'm fixing to buy a good starter welder. I'm glad my first thought was right 😁
So this will have high range, slightly lower range, mid range, quite low range and low range! Excellent! What's not to like? 🎉🎉🎉😁💥🎆
And 6 speeds in reverse.
Gearbox shaft needs abearing sopport to dampen shaft vibration.
This thing will top out at 55mph if you put it on a car. Maybe 45
@@___Eldritch and it'll take about 10 minutes to get to that top speed. 🤣
Supiri aiye🖤🔥
Very good!
Now you have 2 transmissions in 1 !😅
Cool gearing options
Muito bom! 👍👏👏
need to turn the wire speed on the welder down. backyard engineering is great. videos like this are very entertaining.
More like more amps 👍
more amps will just blow holes in everything.
@@robertweitlauf4653 sounds like you need practice mate
@@stefselby i have been a welder for 40 years, how about you. i started welding before wire feed became popular.
@@robertweitlauf4653 of course you have sonny
Haha.... I recognise the gearbox, now I'm tempted to put a bike engine in my car 🤣👍🏾
What is it OFF
@@theideasman6018 4 speed from a Toyota starlet
You'll immediately regret it. This thing makes no power. I can't understand why they didn't just make it direct drive. This thing has 2 gear boxes now so the first gearbox is going to have to get the second one up to speed by shifting through all the bikes gears before the other one can shift into second and you'll need to shift all the bike gears back down to compensate for the now larger gear ratio before you can attempt to accelerate again and by that time your rpms have severely dropped and you'll have to start all over again. This make no power, and has zero speed. You might be able to go through all 24 gears if you go downhill and let gravity do everything.
I just came across your project! I am currently putting a 1100cc motorcycle engine in my toro Groundsmaster snowblower. I am going with hydraulic drive though.
What transmission is that? Awesome job love it. Thanks for the ideas.
U guys seem to have a lot of gears 36 or so wonderful craftsmanship.........
Except they're not going to select any of the gears from the bike engine because they put a gearbox in the way of the engines selector shaft, that was just clutch drag turning the output shafts did you notice he stopped it with his hands 🤣
wow.. double gearbox.. owsm😁👍
Very good
Using a chop saw with sandals nice
This is amazing, i want one
I love the rubber welding gloves, feels great when it gets melted to your skin.. ask me how I know..
also crank that wire speed up until it's cackling smooth like frying oil
wait what you put a gearbox on a gearbox so you can shift while you shift?
Not me also thinking that
Kreasi yang bagus ...salam sukses dan semangat berkarya
Clever engineering bet thats like a rocket when inplace
Well done good job, high and low range
Мы сделали коробку для мотора с коробкой что бы ты мог переключать коробку когда переключаешь коробку) искры в карбы летят прям) кулибины. Сварочный не варит) за то кардан серебристый красивый 😀👍👍
Они походу без газа варят
You srilankan 🇱🇰 .proud of you brother
I was waiting for the car installation. Would have been nice to see it through
Good job
Nice job
Good build yoo with vetter equipment you would be able to create professional high end custom sports vehicles
Need to turn turn up your wire speed on the welder that shit was popping all over the place
I said the same thing
I dont think hes using gas...
Now i hear it lol.
needs to clean up the metal were he is welding
Lol even with no gas that wire speed needs turned up. but hey to each is there own. You just might get a lot of criticism from the pros and/or amateurs.
Double wammy!!you got a spare gearbox in the tool kit under the seat just in case 🤣
I like the idea!
Awesome safety flip flops
You guys need to turn your wire speed down on the welder. 👍
So It is double transmision.. nice😂😂
Hello, it's a great project, well done! Do you keep the motorcycle's clutch and the car's clutch? 🤔 Bravo again👍🏼
I would like to know aswell
Just the motorcycles clutch that’s why this would never work, you would need to swap the clutch everyday
What gear ratios does it have now? Is it 5:5?
Now he can have a gear box like in fast and furious.
Old truck gearbox lol
He meant now he has 11 gears
@@airplanehigh7088 nope, actuality a lot more. If the bike has 5 and the trans has 4 then theres like 20 gears 1-1 to 4-5 lol plus r-1 through r-5 lol
I like the parts where they use eye protection with the grinder but they're wearing flip-flops on their feet. Pure comedy.
we're wearing always flip-flops in our tropical areas !! walking, cooking, even at job time, night and day and at mechanics too, not a comedy but a way of life bro !
How can you synchronized the motorcycle and gearbox shifters?
Sir it's awesome project ,can u tell me what bike engine and which car gear box u have used for do it because I am planing to do the same with Royal Enfield and Nissan Datsun go
This is so much ROCKSTAR 🤟
It looks like a gas powered machine gun!
From the local resources you have completed a great project...
How many gears are there now...😆👍
Well done...be proud of yourselves and l hope the bike clutch lasts👍👍👍
At least 4x4=16 gears but could be as many as 6x6=36 gears 😂. Cant wait to see end of part 2 or beginning of part 3 when they realize they need 2 SEPARATE CLUTCHES. Only way around it is to lock the driven gearbox into a single gear. Lmao
Also going to have several reverse speeds
@@ravinloon7106 lmfao i totally forgot that. But now im thinking high and low gears also. 😱
nice idea
That welding makes my skin crawl . " more power "
That's an interesting spray gun there.
Good video and interesting way to do it
Good work guys don't bother with haters .
good work gays...
Inspiring much 😎👌🤙
Well you gonna have a twin stick car, one sequential for the bike transmission, and a H pattern for the car transmission
Lol
Nice
Listen to all the welding experts saying, turn up the wire. Lmao. A mig welder spits like that when the wire is turned up too much or the surface isn’t clean. The wire doesn’t have the chance to melt into the puddle so it spits all over the place. Either the wire feed turned down or heat turned up.
I was thinking the same or with a lower power supply.you have to do this sometimes which I imagine is the issue
Exactly what I was thinking. Couldn’t believe I was reading “turn the wire speed up”. Total bullshit. 😂
සුභ පතනව ජාත්යන්තරයට යන්න ලංකාවෙ චැනල් එකක්..
Add another gearbox on and engine with internal gearbox system. Use something like kubota or yamaha engine.
More shift like a truck Mack jajaa!!!
You need to adjust the wire speed of your welder
Seems like the only benefit would be reverse, I would rather go with a reverse gearbox and keep the sequential if that's the case. If reverse isn't needed, then I would just go driveshaft-spline 🤔
i like eksperiment,one year ago I installed a Honda 100cc engine to the car, until now it is safe and strong because of the double transmission
U can use 4 th gear in bike engine please inform me thank you
Cool
Hi, what is the first and second coat before you put the black paint?
*Outstanding*
*Blessings Forever God Bless You All* 🌼💞💖💝💝😃😃
Good Lord man oil that drill press
You guys are good but need to turn up the heat on your welder
You guys make project binky look like A grade flogs!
So your gearbox has a gearbox?
We heard ya like gearboxes yoe😁
@@MrTheHillfolk ...so we put a gearbox on your gearbox so you can shift while you shift!
@@akumabito2008 I love shifting.
And then shifting again on another transmission.
And then shifting the first one again.
Gettin all shifty y'all 🤣🤣
It’s like a 5 speed with hi and low range but also has low medium, medium, hi medium and nearly hi range
That's set up is not meant to shift both of those transmissions while driving obviously. The bike engin is for shifting gears the transmission for selecting a gear ratio for your proper terrain at hand .
Best idea yet
👏💪💯😎
Very good work, did you do part 2
So you will have to change gear on the engine and on the gear box?
How else to make awd
As soon as I saw the sandals on their feet I knew this was probably southeast Asia or India.
It's Sri Lanka
no problem with sandal , they are in tropical climate
I'd worry about dropping a wrench on my toes
Very cool bro . Keep it up
Turn the speed of your wire up you'll get smoother beads
Although only a hobbyist the sound of the weld can tell you a lot, it's either slow wire speed as you said or not cleaned the surfaces properly.
I'd go with poor ground.
Im rather confused they put another transmission on it? Are they planning to utilize both somehow?
👍👍👍👍
Safery first.
hand gloves, crush helmet & slipers while doing hotwork this is awesome..
is there no more clutch to use and what kind of differntial back and front you will use
Multiplate wet clutch. The gearbox has a differential.
Hey id like to know wht vehicles transmission is that , awsome video
If you clean up your steel plates they wont pop and splatter your welds.
Are those steel toe cap sandals? would like to buy some...................sweet skills
nice vids sir
I think you should try to fit a motorcycle gearbox in a car engine and make a powerful motorcycle.
Do you think that something similar could be done with a Hayabusa engine? I would like to put a high peRoadster. (400HP +) Hayabusa into a lightweight roadster. Thanks in advance for any and all thoughts, advice, opinions, or answers.
And Boom just like that, i thought after 30yrs of fabrication i had seen everything. Guess not!!!🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
How do you change the gears of a car transmission? It's interesting ☺️
Yo también tengo esa duda
R you running the welder on extension cord no voltage or amperage
Bro which engine and gearbox you used and the gear shift up and down without clucth
Nice idol 🇰🇭🇰🇭❤️❤️🙏👌😘🌷
Interesting
Changing that u joint is going to be fun later.
Now you have 12 gears ⚙️😂
Nice👏👏👏👏👍👍👍