Performance : 117hp & 242Nm Irizfujiwara86 Mechanical Mod-Spec: • Remapped Proton ECU by Khairul Tuner Garage • Super Circuit 4-2-1 Header • Max Racing Performance Middle Bullet • Max Racing S-flow Muffler • Max Racing Forged Carbon Exhaust Tip • Full exhaust piping change by Yi Ekzos • Works Engineering Universal 24K Grounding Earth Cable • Works Engineering Simota Performance Intake • Works Engineering Lighten Crank Pulley • Works Engineering Lighten Cam Gear • Works Engineering Aluminium Pedal • Works Engineering Engine Oil Cap • Works Engineering Radiator Cap • Brisk X-line Performance Silver Spark Plug • Sanwa Front Slotted Brake Rotor Slotted • FECC Steel braided hose • Hot Inazma Voltage Stabilizer • UltraRacing Front Strut Bar • UltraRacing Rear Strut Bar • UltraRacing Rear Torsion Bar • GAB Super R Heavy Sport Heavy Duty Absorber • Muteki Front Lower Arm • Muteki Front Absorber Link • Eibach Sport Spring • Raxer RP10X Rim (15” 7.5JJ) • Michelin Pilot Sport 3 Tyres (195/50/R15) • ALWAYS RON97 USER Irizfujiwara86 Cosmetic Mod-list: • Iriz Rear Spoiler (Add-on) • Iriz R3 Edition Front Lips • Iriz 1ST Gen Premium Side Skirt • Iriz Rear Diffuser by Venom Motorsport • RD Malaysia DRL and Rear-tail lights Stage 3 Conversion Kit • Recaro CS Sportster Nismo (Replica- Thailand) • Custom Carbon Steering • Custom Red Leather Door Trim • DIY Ambient Lighting • Sustec Front Bonnet Damper Hood Lift • Iriz ACTIVE center Console (R&D done awaiting parts from Proton)
scam fake torque, overclaimed. Aderen should know when driving the car because torque make your car lighter. It will break the record for proton can reached 242nm.
That torque figure on NA 1.6 campro with that mods seems impossible. I think the figure is around 140 or 150Nm on wheel at best considering power lost at CVT.
My car totally standard but always tekan by me everytime i driving can hit 10.21sec to reach 0-100kmh. How come modify car only can take 11++ sec. Totally waste
@@fourtry The cvt has a limit, even the beefed up CVT in the turbocharged preve and suprima were limited at 220Nm only, i highly doubt the iriz’s cvt can withstand higher power. 117hp with 240nm gap is impossible with an Na car, that’s a turbocharged figures. torque for 117hp should be around 150-170Nm only
Nice car but i’m sorry that definitely not 240nm car. My stock Iriz 1.6 CVT 2014 does 0-100 km/h in 11.1s 😅 The up hill drive also doesn’t even look close to that figure.
Bro, I like your each review about each car u been driving.. but sadly u always speak Mandarin.. me 🍌, so some conversation I doesn't understand... If one day, possible can you do review with Cantonese language 😂... Paisei² 🙏🙏🙏
经过这个影片后,车主去DynoJet做了一次测试,大家可以看看我的 shorts
Performance :
117hp & 242Nm
Irizfujiwara86 Mechanical Mod-Spec:
• Remapped Proton ECU by Khairul Tuner Garage
• Super Circuit 4-2-1 Header
• Max Racing Performance Middle Bullet
• Max Racing S-flow Muffler
• Max Racing Forged Carbon Exhaust Tip
• Full exhaust piping change by Yi Ekzos
• Works Engineering Universal 24K Grounding Earth Cable
• Works Engineering Simota Performance Intake
• Works Engineering Lighten Crank Pulley
• Works Engineering Lighten Cam Gear
• Works Engineering Aluminium Pedal
• Works Engineering Engine Oil Cap
• Works Engineering Radiator Cap
• Brisk X-line Performance Silver Spark Plug
• Sanwa Front Slotted Brake Rotor Slotted
• FECC Steel braided hose
• Hot Inazma Voltage Stabilizer
• UltraRacing Front Strut Bar
• UltraRacing Rear Strut Bar
• UltraRacing Rear Torsion Bar
• GAB Super R Heavy Sport Heavy Duty Absorber
• Muteki Front Lower Arm
• Muteki Front Absorber Link
• Eibach Sport Spring
• Raxer RP10X Rim (15” 7.5JJ)
• Michelin Pilot Sport 3 Tyres (195/50/R15)
• ALWAYS RON97 USER
Irizfujiwara86 Cosmetic Mod-list:
• Iriz Rear Spoiler (Add-on)
• Iriz R3 Edition Front Lips
• Iriz 1ST Gen Premium Side Skirt
• Iriz Rear Diffuser by Venom Motorsport
• RD Malaysia DRL and Rear-tail lights Stage 3 Conversion Kit
• Recaro CS Sportster Nismo (Replica- Thailand)
• Custom Carbon Steering
• Custom Red Leather Door Trim
• DIY Ambient Lighting
• Sustec Front Bonnet Damper Hood Lift
• Iriz ACTIVE center Console
(R&D done awaiting parts from Proton)
ehh, synergy double layer radiator not yet added during filming?
😬👌👍💪👏
Muteki lower arm is a hazard haiya, don't bother put on car la, my Myvi use for 7 months already kaput, daily drive to work(klia) only
242nm overclaim. dyno scam. CVT2 cant take up that much torque. even cvt3 used by preve will blown up if take that much tork
@@Lelouch-fv9yx the guy who do the dyno doesn't scam. he done tons tons of remap, teaches tons of tuner and got tons of branches now
scam fake torque, overclaimed. Aderen should know when driving the car because torque make your car lighter. It will break the record for proton can reached 242nm.
Proton preve 1.6 Turbo大概 1300kg-1400kg, 忘记了多少HP, turbo kick in 过后 max torque 205nm.. 0-100 都要差不多10秒。这个iriz 如果真的是245nm,应该只要7秒 - 8秒 就100kmh了。 所以我判断245nm是骗人的。
再说,proton 用的punch CVT... maximum tolerable torque 只有215nm.. 如果车主真的有能力tune到245nm... 我相信他的牙箱耐不了几天就炸。
That torque figure on NA 1.6 campro with that mods seems impossible. I think the figure is around 140 or 150Nm on wheel at best considering power lost at CVT.
242nm...0-100 需要超过10秒,这辆车厉害炮咯😆
直接吹到422nm 更好咯😆
同意,stock car 0-100在11秒++而已,这个torque吹到有点厉害
应该是因为 cvt 上 dyno 的关系... dyno torque reading 会稍微不准
My car totally standard but always tekan by me everytime i driving can hit 10.21sec to reach 0-100kmh. How come modify car only can take 11++ sec. Totally waste
117hp我还相信,242NM我还是不相信。
我自己原装iriz 0-100也是11秒出一点点,他改了也还是11秒出一点点而已完全没差
要么去试多几间dyno就知道真的数据了。
而且cvt vt3承受220NM而已,而最新的vt5 才承受250NM。IRIZ用的是VT2+,估算能承受最多应该也才180-200NM之间。
反正看了过后过来是假数据希望车主自己醒目一下吧😂
今天车主就会去 Sunway 做一次 Dyno lo 🙏
@@aderenlim 哈哈哈 看看成绩会是多少了🤣
哥,不要玩,punch cvt 242nm, 估计马力机有问题了吧,cvt 在dyno graph 是100% 线性上升的,然后torque 肯定在before 你的最高马力就出现了,毕竟你都没弄internal, 不是吐槽,只是希望不要有misleading 的info 😅
Impossible, no way on earth can this car gain almost 100Nm without turbo.
Yesza
Nm I don't know but Yes way....why not....look at R3 team at Sepang can put up to 200 hp on campro engine...... Hmmm
@@fourtry 200hp on 1.6na is possible, just look at those vtec engine, but the torque..
@@fourtry vtec torque also around 200 only. This 1 242nm with stock internals is nearly impossible
@@fourtry The cvt has a limit, even the beefed up CVT in the turbocharged preve and suprima were limited at 220Nm only, i highly doubt the iriz’s cvt can withstand higher power.
117hp with 240nm gap is impossible with an Na car, that’s a turbocharged figures. torque for 117hp should be around 150-170Nm only
Unless this car convert to diesel, 240+Nm is possible. But small na engine with remap and spme stuff, 240 sounds too good to be true
又是我期待的一集
242nm …最后几个弯好像拉牛一样 不太可能吧242
nice one bro.. padu ...
wow nice iriz
可能cvt dyno的时候他们调机器那边做了手脚
wanted to see how fast it goes from 0-100 from 242Nm(skeptical about this value since it's NA and CVT )
0-100 looks like not much different from ori
I rather spend the $$$ on a non CVT car
I'd guess its from the inevitable rubber banding effect of the cvt
awesome , spend RM30k, 0-100 = 11 seconds .....
看了这个video又弄到我想买iriz了🤣🤣
242nm 梦里吗?😂
😅
Where you buy the transparent timing cover?
Hello sir, what type brand of this radiator?
这样厉害的!X70 on wheel应该都没有242NM这样高哦!👍🏻
Proton power 😋
@@aderenlim FD2R靠边站啦😝
On wheel 260nm 有。在dyno 原厂数据。
@@SiroccoSeven 那么1.5的就没有了😆
@@3dmundPang 1.5t 三杆有250nm左右。原厂 on wheel dyno la.
我首先向车主说声对不起,恕我直言。
根据你给出的dyno graph写着有24x nm torque,但是经过我耐心的看完整个影片感觉上这个数据很不实际。
尤其是如果你一直有看speedometer的话更加觉得不切实际。
照理说240nm torque上山时速不会提升到那么慢,尤其博主是一直控制在4k rpm左右的最佳范围。(这并不是我个人观点而已,很多有去跑track的motorsport同行玩家也这么认为)
希望车主可以去别一家tuner那里来个dyno power run来确定数据是否有错误。
我个人观看了整个video感觉车很under(根据视频),车主可以考虑增加前面wheelbase宽度或者减少后面的wheelbase宽度。
再次我说声对不起,如果想把我贬为酸民我不介意。
而且我可以建议车主/博主去个sepang trackday来看是否真的有所提升。
这升级基本上是在sepang可以拿到大约在3分钟或以下的lap time,在云顶这样 “试车” 其实很危险,也带来很不好的印象。
谢谢
我已经带了车主去DynoJet做测试了,
我也有拍了个 shorts (你可以点击我的频道看),其实才不到150Nm,所以是马力机的问题🤓
@@aderenlim 直接把link写这里呢。找不到视频
mantap la bos
NA 242nm好像不太可能吧
说实话,原装myvi 都快过他..
我明白自己的爱车上节目会吹水一下自己的车多厉害,
可是这个吹到有点过了🤭
評論區很精彩😂
Owner already clarify on his IG that the actual torque is lower..lol
Why the owner removed his IG. 🥹
❤
这辆我驾出去highway一定给Golf tiong🤣
老实讲 很慢 车这么轻马力这么高nm也这么高 0~100还要十多秒 踩油meter不会去这样 哈哈哈
My car Astina the 167hp only torque out 210nm. How he can get 242nm torque? My car is 80% almost same like AE86.
This guy should upgrade cvt to 1.6 manual...
快乐马力机!
我gm6 120hp 140nm罢了0-100 9秒saja这个是不是dyno有问题😅
Huihh.. takut i tgk u drive 😅
Tulah pasal haha aku takut jugak tengok dia Drive haha 😂 kat genting kot 😂 giler lah,aku kalau Drive tak macam tu sangat haha sebab sayang nyawa bro😂
不是要酸,说实话 myvi 1.5 lagi best 没那么高马力 扭力,0-100还快过他
还有。。。242nm emmmmm😅
手牙lagi best😂
242 真敢吹 一个tuner真敢骗 一个owner真敢信
is it 142 nm ? no NA*no turbo* have this figure..max for NA 1.6 litre is around 160nm..🤔
nice.. ada power..
Average fuel 7.6l..
mkin jimat pulak makin di lenjan
Nice car but i’m sorry that definitely not 240nm car. My stock Iriz 1.6 CVT 2014 does 0-100 km/h in 11.1s 😅
The up hill drive also doesn’t even look close to that figure.
You can see my latest short video, I bought owner to dyno jet and got the real figure ~
只要你不尴尬 尴尬的就是别人
可以哦!😂😂
😂😂 242 nm torque 0-100 so long ?
还是追不到坐奔士的夏树😢
改了无边框后视镜?
Cvt适合4-2-1?
the iriz manual 1.3 that u drive is stronger than this i think
242nm? Ada turbo lar...
My 2500cc NA also around this torque and run 0-100kmh in 8.5s, 1.5ton car automatic
you sure!!!! original 150nm to 242nm???? impossible man
I also kinda skeptical about it. Let us wait and see how fast i goes from 0 - 100..
@@babisotonggg 11.26sc 0/100kmh........hahahahahahahXD 242nm.......
@@weayew009 might be due to punch cvt, but who knows. my iriz 1.3mt(1.6) with 180Nm now can get around 10sec 0/100kmh.
@@babisotonggg that's why impossible 240nm
Assuming is possible, but after 3.7rpm torque curves drop like this how to drive also a problem meh.
242NM 是上了快乐跑步机吗? 那么慢
242Nm 为什么你没有拆穿他 😂
🤫
车主IG关掉了吗?IG找没有😢
What a beaut!
242扭力是多少转出来?6千转啊?😂😏
这车跑得过4age 吗
It will be tragic if this car has not been autofoamed
NA 247Nm? Turbo?
seriously? my ex car neo cps highcam, high comp piston,full system exhaust,open pod n others,only got 120whp and 140nm torque
and 17inch 8jj rim
教一下center console怎么改的
给钱人家改
大改装
No way in hell this thing is putting out anywhere near 242Nm
追persona是哪一集?
th-cam.com/video/tbVaoQK-rOs/w-d-xo.html
这个
242nm 0-100 11sec?? sussy
117hp n 142nm
來了
爱的人,你给车主骗了吧,我的inspira 240扭力,0-100 6.5秒..如果他的是手牙maximum 都是150nm,不可能还快过swift sport zc32 和zc33
觉得最多人吐槽 是这一集🤣吹太大了
@@chenghengmun4963 我觉得爱的人根据顾客的需求说出来,拆穿车主等下变了两个难看
next use Honda prelude pls
这个dyno graft看起来是on body 马力,所谓的bhp的
Nandayoo 😂
扭力有点惊讶242nm😅比civic fe还要高
Is a joke that none of 86 but sticker and name it 86 ~ 24x nm torque 0-100 11 sec still slower than a cvt vios with only 14x torque ~ both jokes 🤣🤣🤣🤣
Na, but more tokkong than max racing exhaust 🙄🤣
我今日才知道,Proton 也有86
Iriz 永远都输给myvi !handling好没用 跑直线就被myvi抛在后面摔10条街!
还有就是 花一辆saga的价钱改iriz。说实话tai ling ngong !怎样改都好还是iriz 还是一样慢 有钱倒不如换更好的车
可是handling也是好过myvi十条街,没有最好只有最适合自己
然后myvi 就被翻在路边,傻逼
果然是100%正中proton cvt 声音大可是速度没有 好yeah
如果改正jazz 就美了
唉可惜。。。名誉很重要哦。
Bro, I like your each review about each car u been driving.. but sadly u always speak Mandarin.. me 🍌, so some conversation I doesn't understand... If one day, possible can you do review with Cantonese language 😂... Paisei² 🙏🙏🙏
Thanks for support boss, you can open the cc subtitle ya 😊
@@aderenlim
Done already bro, but still hopping can hear your Cantonese version 🤣😜
如果改YARIS就帅
happy jet?😮
隨便擠出多近10nm??!! 不是很靠譜,若是說馬力的話還比較可能,最後還是那個cvt真的沒戲,要是換了5mt應該很暴力。那個中央扶手想改,可是這個幾千塊錢。。。直接勸退
iriz 1.6 manual please boss
Bukan senang jumpa iriz manual ni, lagi2 yg high spec 1.6
1600 NA -> 242Nm 2.4na的扭力咯,涡轮增压吧?而且配上cvt。。。改去手排吧哈哈
觉得这辆要改第一先改成手牙的!
改到酱,因该输myvi
Though can play drift😅
在找我?
punch cvt 242nm。。。。。
这俩车好像跑车
242nm???🤣🤣 preve 应该可以400nm 🙃
车主也太天真了吧。那么容易被骗。车主知道240NM 是什么概念吗。哈哈
Anderen 你应该delete 这个video。 笑死人了。
1.6na 242nm!! s2000都没那么高
0-100 也太慢了吗
242nm🤦♂️
Scam torque 😂 to gain more viewer..😅
slow af
speak english bro.. tak faham chinese
Open CC subtitle tq