I ordered a DE n4, can you write a list of what I should upgrade, I will order them and I would like to buy them all at once, nothing about MWS is sold in my country, and the products arrive in 70 days, so I would be very happy if you could help me.
Double eagle is parts comparable with standard MWS yes, we don’t recommend the cyma which uses proprietary t8 parts that can cause other issues- noted in my psa t8 video
Okay... Help me out, what am I missing here? That dummy airsoft DeadAir SandmanS is almost the same price as my REAL DeadAir SandmanS. One is a full auto rated can which can handle up to 300WN, the other is made to handle little plastic bbs. I really feel like I am missing something.
I have questions about the internals used. I am UK based so weather is mostly cold and wet. Was wondering if you have advice on what internals to run if you can.
I’ve been meaning to do a cold weather video for ages, starting to look at this channel again so will try to do soon. essentially you want a lightweight bolt, lightweight buffer (stock or aluminum with light weights) and a lightweight zet plate (bavtac- also changes geometry so bolt will still lock even if short stroked due to less gas etc) about all you can do.. I’d also say a silicone bucking can’t hurt and may resist freezing up as quick as typical rubber buckings (modify, maple leaf). Alternatively, the akm is a superior cold weather platform and even with all the above mods a stock tm akm will outperform in cold weather, ime. Have taken it down to 25F which is sub freezing!
MWS is the best. Only gun I use now other than maybe my TM MP7. Love the ability to upgrade it and compete with any of the AEGs. I love my MK18. I use the Angry Gun QD Surefire, they work great. I have found that my G&P GBAL won’t handle the recoil, so I’ll check out the SOMO GEAR.
Can’t comment on the cymas yet. In general I’d recommend the original Marui if you can swing it, but if you want a noveske kit the Cyma could be a good value. Know a couple guys who have them on order but too early to tell
FYI found more info: the cyma uses the t8 systems parts which are not comparable with many stock parts (bolt/trigger box) so I’d recommend double eagle if going that route, but again don’t know how well they fare
the buffer retention thingy is easily the most stupid design in my case even if I rotate the buffer tube deeper to hold the thing now the upper receiver collide the extra 1-2 teeth of buffer tube. Not to mention the thing would actually get pushed down when the upper receiver is close, to clear room for the bolt when blowing back. Have had so many times the buffer pops out when the gun is cycling and when I disassemble the receiver. even scratch a mark on the edge on the upper (feel really bad) personal opinion, go for the EMG/Aplus one if you just want the appearance and want to hang it on the display wall, performance wise you can always tune it on your own. If you want a MWS system GBB with this Dytac kit, you better go find a pro gunsmith to do the job for you, unless you yourself are a pro/ experience with messing with the conversion kit. You dont wanna damage the receiver like me (maybe its ok to scratch the internal side but I did scratch the outside because of that stupid buffer) As far as I can tell MWS got the best magazine (T8/guns modify/stock marui) and with the most after-market product available.
Sorry to hear that most people have had great luck with the Dytac kit, one of the few aftermarket kits I will recommend without caveat. I wouldn’t turn the tube in so much that it interferes with closing the receiver. Not sure if I mentioned but I simply removed the buffer retainer retaining pin from the rear and turned in the tube enough to catch it like a real ar15, this allowed it to pop up higher and catch the buffer better, but makes it a bit of a pain to remove the buffer
The new gen2 is coming out any day now I’m waiting for that- can get direct from somogear or paragon armory in US or my buddies shop bavtac in uk- he’s a fellow mws user and is doing cool things for the community so I recommend supporting him but paragon is good ppl too
Assuming due to cold? Just fyi we have users all over the world. With some slight mods they can and have been used in freezing and sub freezing temps! There’s some neat snow footage online I’ve been wanting to make a video on that.
@@CryeBaby have high hopes for it! Hope it gets more ppl in the gbbr game cus it’s a blast to use these guns. Can’t speak to any quality or longevity of parts though as I only have experience with the tm’s
@@MGVzion on evike there’s two versions, cheap one made by double eagle and another by cyma that’s a bit more. Both are less than the Dytac kit alone. I’m sure it’s not as nice/high quality materials but hoping the value is also there and it’s not just cheap and unreliable. Either way could be a nice entry gun if you can’t afford a real custom mws which I understand! Double eagle: www.evike.com/products/103135/ Cyma: www.evike.com/products/102356/
Let me tell you this
Your mws build is fucccckkkkkiing sick 🔥🔥🔥🔥
I ordered a DE n4, can you write a list of what I should upgrade, I will order them and I would like to buy them all at once, nothing about MWS is sold in my country, and the products arrive in 70 days, so I would be very happy if you could help me.
Such a beautiful😎 build
This or the Double Eagle MWS is the way to go. The DE uses a Zet Clone which accepts all MWS parts from what i can tell.
DE is a TERRIBLE company wtf are you talking about?!? 😂
Double eagle is parts comparable with standard MWS yes, we don’t recommend the cyma which uses proprietary t8 parts that can cause other issues- noted in my psa t8 video
@@sleazykilla360 you clearly don't know what you are talking about.
@@sleazykilla360 lol you'd be right considering their past offerings, but the DE ZET Noveske is truly a great gun.
where did you source your the angry gun dead air suppresser?
I can’t recall, believe it’s the angry gun version? I use redwolf airsoft or jk army a lot, probably there
Hi mate this is really cool just wandering if this is the Tokyo Marui M4A1 MWS GBB With ZET System or the Tokyo Marui mk 18 with ZET system ??
This was a standard MWS base
Hello, I would like to know if the kit was compatible with real steel buffer tube or mws buffer tube?
I believe this one may have been compatable with RS tube but it’s been a while since I built it so I don’t recall exactly.
Okay... Help me out, what am I missing here? That dummy airsoft DeadAir SandmanS is almost the same price as my REAL DeadAir SandmanS. One is a full auto rated can which can handle up to 300WN, the other is made to handle little plastic bbs. I really feel like I am missing something.
Repro cans should be about $100, still expensive for what they are but nowhere near real suppressors
I have questions about the internals used. I am UK based so weather is mostly cold and wet. Was wondering if you have advice on what internals to run if you can.
I’ve been meaning to do a cold weather video for ages, starting to look at this channel again so will try to do soon. essentially you want a lightweight bolt, lightweight buffer (stock or aluminum with light weights) and a lightweight zet plate (bavtac- also changes geometry so bolt will still lock even if short stroked due to less gas etc) about all you can do.. I’d also say a silicone bucking can’t hurt and may resist freezing up as quick as typical rubber buckings (modify, maple leaf).
Alternatively, the akm is a superior cold weather platform and even with all the above mods a stock tm akm will outperform in cold weather, ime. Have taken it down to 25F which is sub freezing!
MWS is the best. Only gun I use now other than maybe my TM MP7. Love the ability to upgrade it and compete with any of the AEGs. I love my MK18. I use the Angry Gun QD Surefire, they work great. I have found that my G&P GBAL won’t handle the recoil, so I’ll check out the SOMO GEAR.
Nice vid dawg
Great Video would you rather buy the Tokyo Marui one or is it ok to Go with a Cyma one?
Can’t comment on the cymas yet. In general I’d recommend the original Marui if you can swing it, but if you want a noveske kit the Cyma could be a good value. Know a couple guys who have them on order but too early to tell
FYI found more info: the cyma uses the t8 systems parts which are not comparable with many stock parts (bolt/trigger box) so I’d recommend double eagle if going that route, but again don’t know how well they fare
@@Wolfman_NVThank you for the reply 👍🏻 I don’t know TH-cam didn’t gave me a notification. I am going with the MWS ✌🏻
the buffer retention thingy is easily the most stupid design
in my case even if I rotate the buffer tube deeper to hold the thing now the upper receiver collide the extra 1-2 teeth of buffer tube.
Not to mention the thing would actually get pushed down when the upper receiver is close, to clear room for the bolt when blowing back.
Have had so many times the buffer pops out when the gun is cycling and when I disassemble the receiver. even scratch a mark on the edge on the upper (feel really bad)
personal opinion, go for the EMG/Aplus one if you just want the appearance and want to hang it on the display wall, performance wise you can always tune it on your own.
If you want a MWS system GBB with this Dytac kit, you better go find a pro gunsmith to do the job for you, unless you yourself are a pro/ experience with messing with the conversion kit. You dont wanna damage the receiver like me (maybe its ok to scratch the internal side but I did scratch the outside because of that stupid buffer)
As far as I can tell MWS got the best magazine (T8/guns modify/stock marui) and with the most after-market product available.
Sorry to hear that most people have had great luck with the Dytac kit, one of the few aftermarket kits I will recommend without caveat. I wouldn’t turn the tube in so much that it interferes with closing the receiver. Not sure if I mentioned but I simply removed the buffer retainer retaining pin from the rear and turned in the tube enough to catch it like a real ar15, this allowed it to pop up higher and catch the buffer better, but makes it a bit of a pain to remove the buffer
Hey I saw you have another ngal do you know where I would buy one I know they are t in stock anywhere but do you know anywhere I could buy one?
The new gen2 is coming out any day now I’m waiting for that- can get direct from somogear or paragon armory in US or my buddies shop bavtac in uk- he’s a fellow mws user and is doing cool things for the community so I recommend supporting him but paragon is good ppl too
Lewis Patricia Gonzalez Gary Garcia Elizabeth
Also what’s the guys tag for the sling
Fat_pancake_gear on ig
That build is sweet i am doing one just not gas because the environment i live in it wouldn’t be practical lmao
Assuming due to cold? Just fyi we have users all over the world. With some slight mods they can and have been used in freezing and sub freezing temps! There’s some neat snow footage online I’ve been wanting to make a video on that.
@@Wolfman_NV ooo i might get a the emg mws next then
@@CryeBaby have high hopes for it! Hope it gets more ppl in the gbbr game cus it’s a blast to use these guns. Can’t speak to any quality or longevity of parts though as I only have experience with the tm’s
@@Wolfman_NV yeah i feel as if the tm’s are gonna be more quality but for a good cheap one they will be sweet
@@CryeBaby Definitely. The design itself is solid so if they stick to that and make it compatable with aftermarket parts it should work well!
Have a link to the Evike Clone?
It’s not out yet but lookup emg noveske mws
@@Wolfman_NV Can't seem to find info on the subject, where did you see that ?
@@MGVzion on evike there’s two versions, cheap one made by double eagle and another by cyma that’s a bit more. Both are less than the Dytac kit alone. I’m sure it’s not as nice/high quality materials but hoping the value is also there and it’s not just cheap and unreliable. Either way could be a nice entry gun if you can’t afford a real custom mws which I understand!
Double eagle:
www.evike.com/products/103135/
Cyma: www.evike.com/products/102356/
em g
perfectly good gun ruined with magpul garbage