28 mars 2024

[@matthewpeterson3329]

The end result looks very nice, and the rivets are certainly a cheap. on the fly, option. But if I were spending the money on nice wood, I would have would have upgraded to some small steel dowel pins and plastic washers for the base to ride/float on. Otherwise, nicely done mister!

[@Handlealreadytaken.Trythisone.]

Same ✅️😊

[@thedude3318]

I agree.

[@JimMedcraft]

Yeah, agree the price of wood here in Australia is pretty high ATM not sure if that's just a local thing

[@johnpoole7327]

Add a couple of parts and have it open and close via remote control. Use a cell to blue tooth control . About $200.

[@rosco4659]

@@JimMedcraft Wood prices are high the UK as well. Loads more than it used to be.

[@Pro_Komp]

внизу можно было бы все ламели соединить и одной ручкой открывать/закрывать их. было бы и ровнее и удобнее, как по мне)

[@ИзделияИзКожи]

Просто соединить их снизу достаточно, повернув одну доску, повернутся и остальные

[@user-xb5ey8bk8p]

​@@ИзделияИзКожикак это???? Нет конечно, повернется одна

[@ИзделияИзКожи]

@@user-xb5ey8bk8p каким образом по вашей логике повернется только одна, когда будут все между собой соединены??

[@user-pz8hf8rt7q]

Полностью не повернуться, оси помешают, доска соединительная в них упрется

[@ИзделияИзКожи]

@@user-pz8hf8rt7q можно соединить не доской, а стальным прутом в виде "Ш"-образной рамки (в виде гребёнки), тогда перемычка не будет упираться в оси досок. Все вполне просто.

[@user-vm7mm6vf4b]

Снести стены и сделась студию, чтоб поставить перегородку! Даааа!

[@user-zt4uf9si3c]

Уже дал себе заметачку на такую перегородку 👍🏻🥃 Спасибо Большое Автору 🤝😉🥃

[@keithkillion4245]

That's a really good project idea

[@lp729]

L101011​@@keithkillion4245

[@lp729]

P]😢p]pp

[@martymaribel4726]

L ec😮uvubu

[@dmitrygalochkin4966]

А если ещё просверлить по пару дырочек в каждой дощечке и продавая верёвку зафиксировать то оную можно будет закрывать и открывать по принципу ролет.😂

[@wolfgangochoa638]

Buenas tardes. Muy lindo este trabajo. Gracias por enseñarlo

[@jimandskittum]

You could add a little tie bar across the top or bottom so they all opened at the same angle.

[@grumpyone5963]

Stole my comment!…. I came to say this😂👏

[@ningen1980]

No bullshittin'. That's clean! Dope install.

[@mrpesky163]

I'd probably try to use quarter inch or five sixteenth machine nuts and bolts instead of the rivets, which don't seem sturdy enough for that application. On the end grain, install a flat metal bracket for the bolt to pass through to prevent wear and potential split out. 🤔

[@johnsrabe]

It’s decorative, isn’t it? Rivets are fine. No wear and tear.

[@timderks5960]

There's literally no force on anything here, this'll work just fine. I wouldn't have done it like this, but it'll work for a long time.
Sure, if you run into it it'll break loose, but those boards would probably snap anyway.

[@soulguidance81]

Agreed. Better things than the thin rivets

[@garrettlanders4027]

Yeah, it’s obviously flimsy from the video and is definitely more so in person. The brackets are a great idea for not having to ever rip the whole thing out or replace a board when the one of those pine boards cracks or breaks from something bumping it or kids or something.

[@gregoryslater3317]

Always somebody with negativity....
SMH

[@garryquiggins8183]

I hadn't seen that done since 1965. Good to see retro coming back!🤔🤨🤣

[@aleks-33]

This type of thing is very popular on pinterest. Does it have a name?

[@waynehoberg1655]

Haha, I was gonna say the same thing. 1978 called, and they want their louvers back! 😅

[@MrALLbBAK]

Great revival, I would of setup horizontal (California shuttlers) so to control louvers with one single controller strip

[@CarolCrain-nk7jj]

Is that flush with the ceiling? Being that the walls are black I think it would have blended in well if it were black. This is just my opinion 🤷 I love what you done

[@erwinbenally8027]

Giant louvers, great idea, thanks for sharing 👍

[@medmo7723]

T’es une bombe l’idée des rivet 😮purée trop malin Steph!!

[@uberdjo3263]

Je venais écrire ça 👆

[@steph_aria9577]

Ça m’est venue comme ça en 5 minutes à penser d’abord au taquet d’étagères mais la coupoles est trop petite

[@steph_aria9577]

@@uberdjo3263😉☺️😀

[@blackheartAA]

Qué gran idea tuviste! Me solucionaste el problema 🎉 de verdad gracias
You blow my mind 🤯

[@user-hk9zh3gc2e]

Идея хорошая, исполнение отвратительное. От множества поворотов под тяжестью досок шляпки клепок осядут в дерево и жалюзи перестанут свободно поворачиваться.

[@IsWIM872]

I made one of these to my first owned house when i was 18. Fun project

[@PersonalStash420]

Must be nice owning a house at 18. Nicer to brag about it.

[@dimonkrytou]

Облокотился и нет перегородки))

[@user-dn2sx5pc2v]

Кого-то она перееёт вдоль горба точно.

[@yayakyartu2061]

​@@user-dn2sx5pc2v😂того кто делал

[@MrDeepfallen]

Ее можно закрепить) пол, потолок, стена

[@user-mb2vl2ct6o]

Пить не надо.

[@svenc8026]

а я думал это пылесборник

[@AkaizWoof]

Beautiful decoration in your house

[@gunnmgall1850]

Excellent, pourquoi se compliquer la tache quand on peut faire simple. Faut juste y penser, bravo Steph tu es un génie.

[@steph_aria9577]

Oui voilà exactement, merci en tout cas

[@ChrisDac08]

I’ve been thinking of something like this as well for a deck area for privacy or wind blocking. I’d love to see a version that has some sort of gear train or something that can makes the louvres move in tandem

[@batmansdad3195]

You can buy the kit at home depot.

[@user-wp5kd4fm4u]

Механизм по принципу вертикальных жалюзи.

[@user-ip6qn2pf5b]

Принцип жалюзей закрытия радиатора на УАЗике

[@BadBoyDeGekste]

Literally attach a long horizontal piece of wood to each board with hinges. Doesn't have to be big and bulky a small one will do.

[@MrALLbBAK]

Install horizontal louvers adding an adjustment strip down one side to adjust louvers

[@petraseifert3796]

Das ist ein großartiger Raumteiler. Perfekt 👍🏻💖👍🏻🌸🌼🌸

[@San-uu7qc]

Aber ohne Tüf 😂

[@mactricelectric]

@@San-uu7qc ohne Tüf hahahaha

[@doeroftheword262]

Nice for a studio apt for separation, privacy and to let the light in! Job well done 👍

[@ursus_saggitarius]

меня больше удивляет, где вы берете такие ровные доски!

[@tor4451]

Можно найти в строймаркетах они по штучно продаются обёрнутой сарафаном

[@user-fs6ug7hg4k]

В леруа по 1500 за штуку😂

[@ursus_saggitarius]

@@user-fs6ug7hg4k видимо, Леруа везде разные. Брал фанеру - страх Господний))

[@arbat3Amkad]

Ровные доски будут только, если вы сами их потрогаете или закажите у столяра.

[@vasilygolubev9644]

​@@arbat3Amkadну не знаю, я два дня трогал, трогал доску, так и осталась кривая, пришлось через фуганок и рейсмус прогонять😅

[@AksenDik]

Идея норм, но необходимо абсолютно сухое дерево! Если поведёт соседние доски хотя бы на 1 - 2 мм, будет очень заметно

[@user-ug3ye5kv6c]

Даже если абсолютно сухие, со временем поведет.. необработанное деревл влагу всеравно впитывает.

[@andrej.babichev]

​@@user-ug3ye5kv6cну поведёт и что? И хер сними 😊

[@shamil_kupol]

​@@user-ug3ye5kv6cнадо склеить две доски потоньше между собой.поведет гораздо меньше.

[@yatkovskiydmitriy1009]

Самый главный ? а на уя она такая нужна.

[@DartNox]

По-хорошему это должна быть термодревесина, её почти не ведёт.

[@миха86]

Нормальная идея. Оригинальная фурнитура стоит как три таких перегородки

[@user-ot8zw9eb7l]

Можно использовать обычные заклепки))) У него же они каждая отдельно от остальных поворачивается))) только вид, функционала от ориги нет

[@terehoff68]

@@user-ot8zw9eb7l добавить тяги из той же рейки - вот и функцоинал.

[@korekapik]

Woah , tak terpikirksn sebelumnya , rivet bisa menggantikan pivotal hinge. Trima kasih sudah berbagi.

[@rooflessmofo]

Really goid job and nice of you to share what slmost ferls like inside information! This is definitely an idea i will adapt.

[@luisaraujo4708]

Great use of dome head pop rivets!

[@martinramirez9647]

Only rivets hold that thing up? It ain't gonna last I bet you.

[@Vincent-ck1un]

Nope... rivet are only there to make a pivot for cheap and quick solutio not to hold anything, they are not even pop😂

[@martinramirez9647]

@@Vincent-ck1un exactly my point, even though it's not to hold it, it is holding it upwards, sure it can pivot, but come on, that shit will fall with little resistance, as nothing is really holding it.

[@artetaDagoat]

Is it fixed to slab or ceiling joist? Someone will just kick the end over too

[@ClovisReims]

Mec t'as quand même de sacrés idées avec pas grand chose en plus... Franchement top comme d'hab ! Hey salut ;)

[@Scratchingforcash]

I’m not gonna lie, I like it. I’m thinking of doing something like that too! Great idea!

[@donmordecai998]

Looks great! I’m skeptical. Are the rivets strong enough? They are designed for the stem to “pop off”. If they are, then that’s wonderful!

[@brobro3856]

Это не забор на улице, чтоб выдерживал ветряные нагрузки или дожди … Дома вполне выдержит. Но не с детьми маленькими!) Снесут в первый же день!)))

[@dubmob151]

Could also use the frame to mount a set of vertical blinds if there's no need to keep someone from crashing through the separator -

[@barnes29510]

Rivets are very durable and would definitely out last wooden pegs. I'm no carpenter by far but I can customize vehicles. I manually popped 250 rivets in a L88 Corvette hood scoop once; trust me. The inventor didn't have me in mind 😅

[@batmansdad3195]

​@@barnes29510you used the rivets for what they're intended for; to be compressed until they create a solid pinch point to which the shaft will snap off.
This should work on this guy's end, over time the wood will dry out and run the risk of splintering in that spot. That or the holes will expand over time for rubbing on that rivet.
Just to be clear for everyone else as well, those rivets the installer used looked aluminum.

[@j.f.christ8421]

@@batmansdad3195 You sound like you've heard about rivets, but never actually looked at one.
They'll be fine. The bit that snaps off is outside of the rivet, it's not going to shear. Wood drying out causing splintering? What?
What does it matter if the rivet is aluminium? Are you worried about galvanic corrosion between the steel pin?
Look up commercial window shutters, they use plastic pins that aren't that much thicker than that steel pin.

[@Cestpasfaux-]

Sympa le rendu !
Ca aurait été cool de lier entre elles les lattes pour quelles tournent toutes ensemble

[@steph_aria9577]

Merci oui ça serait cool mais là cela sortait du budget et à la fois dans tout les cas d’ici 1 mois tu ne le touches plus, c’est juste qu’on joue avec au début comme tout quoi 😉

[@loiccaillier9815]

​@@steph_aria9577bonjour c'est quoi les tiges que vous avez mis ont peut les trouver ou?

[@vilain2181]

@@loiccaillier9815 j'ai l'impression que ce sont des rivets pop

[@rudyantheus8171]

@@loiccaillier9815 des rivets pop

[@steph_aria9577]

C’est des rivets comme dit Rudy 😉

[@meloman8291]

Мне одному кажется, что с этой полки всё будет падать?🤔

[@user-gp4io9kt1k]

Ты где увидел полку?

[@KaledMouselli-ri3yo]

Es muy ingenioso ! Simplicidad y belleza

[@user-zv3ev7kf1r]

Trop d'inspiration chapeau l'artiste

[@claudianascimento5800]

Agora já sei como fazer, o projeto vai sair da minha mente para realidade, parabéns pelo vídeo e obrigada.

[@user-kh2yn2wo6j]

Tbm estava pensando,como separa a cozinha gourmet da sala genial está idéia e fácil, grato.

[@dondaddah9141]

Wow. This actually would work for something I've wanted to do but couldn't figure a cost effective way to do it...thx man!

[@FHG1st]

Really nicely 👍👍👍

[@jeremymathelier2854]

Bravo steph, toujours au top, ça toujours plaisir, merci 👍🏾

[@steph_aria9577]

Eh salut Jeremy avec plaisir 😉

[@jeremymathelier2854]

@@steph_aria9577 continu steph ! Tu le sais déjà, mais c'est un plaisir de t'écouter et merci de partager ton expérience, t'es astuces et bien d'autres choses ! T'es un mec comme ça 💪.
Bise l'ami

[@steph_aria9577]

@@jeremymathelier2854merci Jeremy et oui je continuerais car c’est mon moyen de détente de mes journées ☺️😉

[@lorksoft]

Chouette, mais perso, j aurais pas découpé la plinthe, j aurais doublé la planche verticale + découpe. Pour ne pas laisser de rrace si on jour faut l'enlever

[@EdwardLorreto]

Your work is second to none May God continue to bless you and your family outstanding work

[@loopsmybrother6156]

Its a cool idea i do like it
But it looks like a stud wall without plasterboard

[@Omar-artmexiclan]

Se va a abocardar con el movimiento. Las tablas asi de largas se van a pandear.
Es buena idea lo que presenta, pero alguien me dijo" debes de ocupar herramientas y herrajes adecuados al trabajo, ejemplo los clavos con cabeza para una mesa le quitan valor a una madera fina.
Al girar la madera debería llevar un eje mas largo, abajo y el otro un poco más corto y un grosor proporcional en la cual también al girar la tabla gire el herraje y no la tabla, es decir la tabla entra a precion y el firo lo daría digamos los tornillos.
Tomar encuenta: Peso - altura - Ancho- Volumen y sacar atraves de una fórmula la fuerza que ejercerá cada tabla.
Los remaches se van a doblar.😢. Nooooo!!! .
Tan solo al entrar a precion y las tablas delgadas se van a ir doblando.

[@sebastienroehr7198]

Salut Steph, trop bien ton idée des rivets pour un claustra pivotant. Tu as des nouvelles de Damien ?

[@steph_aria9577]

Salut Seb merci, tu parles de Damien sur Paris en tant que menuisier ?

[@sebastienroehr7198]

@@steph_aria9577 oui c'est ça, le menuisier de la team des menuisiers de la nuit 😉. Il m'avait parlé que ça boîte allait s'arrêter.

[@steph_aria9577]

@@sebastienroehr7198oui effectivement il règle le truc et on voit ensemble 😉

[@sebastienroehr7198]

@@steph_aria9577 Cool le coup de main entre artisans. J'espère que je vous verrai encore ensemble sur des vidéos

[@JamesMcCarty]

Lol. 1990-2015 we spend time and money ripping down every wall in our homes to make an "open floor plan" 2020- we spend time and money figuring out every way to divide up rooms.

[@davidf.8497]

Great idea. Thanks!

[@jdavidruizjr]

No

[@kadour2paris]

Beau travail merci 💪👍🌹

[@alfredoarcassilva1903]

Eso es lo que realmente necesito hacer en mi casa y tengo mucho tiempo que estaba esperando una idea como está..... Lo trate de hacer con bambú Pero no resultó porque no están derechos. Gracias saludos desde Venezuela

[@Lastleaf369]

Eye twitched a lil bit when i saw rivets. Looks great but I'm not sure about strength of "raw" rivets. Anyway, looks great, good job!

[@salvatoreprincipe5078]

Eccezionale, risolve ed è gradevole 💯💯

[@mariaruvalcaba9644]

Hermoso trabajo

[@dariomunoz8406]

Ta bonito el diseño de la sala y sencillo de hacer

[@husseinasemy8204]

تسلم عمل فني جميل. 🌴🇪🇬🌿

[@davidlamborghini9108]

Looks better without it that looks like something from the 70’s 80’s

[@yuribo6993]

Super Idee merci 😊

[@yuca777]

Est-ce qu’il y existe, un seul truc qu’il ne sait pas faire ? Encore un boulot magnifique 🤩

[@hellfrozenover2]

Remember me of an IKEA building they use almost the same attachment style.

[@billbrowning50]

Weak, and it wouldn’t take much to destroy it. A slight trip into it.

[@user-tr6cz6yo7q]

Гояга гап йук менга ëкди
Тахталар курук булса яхши буларди деган фикирдаман

[@jerryklooster438]

I like the idea, but with an unsupported eight foot span, I would be worried about the 1x4's bowing over time. Looks nice, though.

[@aleks-33]

Where did u get the plans for this? I wanted to build this. 😢

[@ReinholdSiegfriedBarsch-if6xu]

Gut gemacht,aber es fehlt die Verstellsrange

[@leontelarrauri1602]

Hermosísimo

[@vladanmanojlovic3272]

Ich wäre nie auf diese Idee gekommen! Die Ganze Zeit dachte ich es müssen besondere Schrauben oder Metall Stifte benutzt werdern...👍🏻👍🏻👍🏻👍🏻

[@Nite-Nite_Son]

Nice ❤

[@user-mg6xo5ck7m]

Молодец хорошо получаеца мастеру уважуха.

[@elmcgyverargentino]

Buen trabajo pero muy retro, se usaba en los 80/90's

[@joelasheski345]

Good job finding straight lumber!😃

[@delacouryvelise349]

J adore vos vidéos et votre travail est toujours très bien réalisé très pro et des trucs auxquels on ne penserait pas tout de suite 👍👍👍👍🙂

[@didndido3638]

Good lord...rivets in oak?! Is this ragebait?!

[@joshuamatheron1]

I’ll be honest. I was wondering what the hell you were doing. Fantastic idea 👍

[@wrdennig]

How did you jam it up to the ceiling . . . my limited knowledge of geometry says that you can't. Because the hypotenuse is longer than the height of the triangle.

[@GrayTeam83]

WHAAAAAT. I'M VERY IMPRESSED BY THE SIMPLICITY AND AMAZING SKILL 🤩

[@salemaljaber221]

الفكرة جيدة
وكان يجب وضع برواز معدني لمسمار صلب
لان المدة التي ستبقى هذا الحاجز طويلة
ومسمار البرشام سينكسر او ينثني
اعتذر : مجرد رأي بسيط
شكرا

[@toml802]

Cool idea but those boards will warp over time.

[@Benjamin-wj4nf]

Did you attach to the wall or to the ceiling and floor as well?

[@dagoberto7158]

Del 1 al 10 por el trabajo. le doy un 7..
Del 1 al 10 por la canción. le doy un 💯❤

[@Jo3826]

Jamais je n’aurai pensé à utiliser un river ! J’aurai trop peur de la casse ! Et vue que tu fais chaque fois du super taff c’est que ça doit être bien solide finalement !!!

[@arturonavarro5282]

What a father it turned out for you and it looks spectacular!

[@mikerass5435]

My thought process here: are those rivets? TF is he using rivets for in wood? Is he planning on fastening wood together with rivets? This could be cool. Wait, he can't seat the rivets if he puts the boards like that. Dude those boards are gonna rotate if you do that. WTF? Damn, those boards are gonna rotate. Sick.

[@pedroantonios.p.7097]

Muy buen trabajo. Una idea genial. Un saludo.

[@Dema-777]

Сама идея очень хорошая!
Вот только использовать подобную фурнитуру..., я бы наверное не стал.

[@TheBerlu13]

Trop fort merci pour cette précieuse combiné je doit faire un claustra dans la chambre de ma grande merci encore Steph t'est le meilleur.

[@framergod69]

I've pulled that out of so many homes .

[@tylergood9168]

80's -90's were spent ripping all that out. from the 50's. that was not the "contemporary " solution there. that was the cheap solution there. nice work but it has to go. shattered glass is old but would have worked better there. LED panel

[@Naboula01]

Nice design and idea. But how tough is it ? I mean i don't remember those aluminium fitting being that strong. Why not use steel Rod and nuts on top ?
Anyway Thanks for the idea it is a genius stuff.

[@kippur777]

Great idea man. Thank you for the food for my thoughts!

[@trebell885]

Outstanding, jolly..

[@dmitryk3924]

Я не думаю, что она через год сам не станет серпом, пропеллером и тд... Доска нужна типа фанеры, чтобы не крутило её

[@robertvalure3783]

Cool idea! Might have to steal it? Or maybe try it horizontal?

[@user-NaturesResourceHandle]

I’m really fascinated with this concept of industrial arts building and construction.

[@nicoesiea]

C'est magnifique, est d'une incroyable simplicité, mais comment le fixer définitivement au plafond ? Au mur? Au plancher ?

[@user-fe2gz7tu8u]

Винтиками : сверлиш и чопики деревянные если Битон ..🎉😢

[@catherinerochefort3030]

Parfait ! j'aime beaucoup ce genre de séparation

[@user-fc4cw9ju4v]

Salut super comme d'habitude merci pour l'idée

[@nordineremadna4186]

bravo à toi folie penser tout simplement c'est vraiment une idée géniale en plus c'est bien fait et c'est vite fait😮

[@43painter]

Beautiful! For this design, all planks really need to be super straight.

[@barnes29510]

If I had this, I'd have to put a painting on both sides that would correspond with each other (when flipped)
Great video. Thanks for sharing

[@cindersfella8944]

Your screen is brilliant 😊😊😊❤😊😊❤😊😊

[@carlosplascencia7137]

I wish I had enough money to afford a place big enough to put up more walls just because I’m bored of having too much open space

[@philshardwareandmechanics.3123]

Génial! c'est assez costaud sur rivets?

[@saturatedodin476]

It would be cool if you could play tic tac toe on it