ULTRASONIC TEST ANGLE PROBE WITH PRACTICAL
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2020
- This video is ultrasonic machine and different object practical basically angle probe 45 deg 60 deg.Ultrasonic testing (UT) is a non-destructive test method that utilizes sound waves to detect cracks and defects in parts and materials. It can also be used to determine a material's thickness, such as measuring the wall thickness of a pipe.Angle beam probes consist of a transducer and a wedge, which may be separate parts or built into a single housing. Most commonly used angle beam probes generate a refracted shear wave at standardized angles of 45, 60, or 70 degrees in the test material.
- เกม
Sir great Video
Cleared many doubt
Must watch video for every newbie in NDT
Thumbs Up👍👍
Thanks sir 🙏🙏
Best explanation sir ,,need more videos with practicals on UT ,,,,THX
Please THX what. Sir see my NDT playlist thanks
45, 60 & 70 degrees are most common probes but you can buy any angle probe. I don’t understand why some people are surprised about 30 degree probe. If you don’t have or not seen 30 degree probe that doesn’t mean that it does not exist.
Nice video...
Guru ji app ko pranam
Nice
Thanks sir
There is something wrong, sir.The probe angle is of three types 45°, 60°& 70°.There is no angle probe of 30°
Yes
Yes
Very well explain sir
बहुत बहुत शुक्रिया धन्यवाद दिन शुभ हो.
Pleas start video calibration with formula from how to calibration
Thanks sir bahut achhi video h
Thanks for comment ji
👍👍👍
Sir wo Cristal hai ya prob shoo
Jisko colour blindness hai wo UT kr sakte hai ya nhi?
30 degre probe kya
can we calibrate angle probe without any reference block?
No sir , refer to standard angle block . machine setting ho sak the hey but probe nahi
Sir 24 dia or 10 dia probe kab kaha use hota hai...
Good sar
Thanks
Transformer testing b btae sir
DC or AC transformar ji
Hi sir please contact need a ultrasonic machine was wondering if you were looking to sell or you know someone who would be willing to sell
बहुत बहुत शुक्रिया धन्यवाद दिन शुभ हो.
8770507412
Raund UT ke bare mae baataiye sir kaese kare
ok
Sir mughe ut operator banna h
Sir kya ap hame full ut operator banne Ka kast karege
Thanks for comment have a nice day sir
Sir I want you need full help
thanks sir types of need
Angle probe me without defect back wal aayega ki nhi sir please reply
Sir any probe back echo always defect hey or nahi....
@@classroomdada1868 sir doubt mere ko ye hai yadi 100 mm range set kiye 25mm ka block hai aur koi defect nhi hai to angel probe se back wall kab milega , normal probe me to 25,50,75,100 pe milega ,lekin angel probe me milega ki nhi..Aur kab milega
Inclined angle Jo ki distance base top side
Surfaces distance
@@UttamKumar-je5qi Angle probe sa V1 block ka dia wali side sa echo lain. 1st echo 100 and second 200 and so on eachos ain gi
And if you calibrate on V2 clock from 25mm dia side then 1st echo 25, 2nd eachos 100, 3rd 175 sa aygi
Jaese ki 50mm ya100mm. Ke bare me
Thanks for comment sir
Next.....
30 degree???
Thanks sir
@@classroomdada1868 what thanks
30 degree is wrong
Number
Kemra full karke kilin dikhe
Brother ,u r bengali right
Yes Midnapore
@@classroomdada1868
From bankura
Sound quality bahut kharab hai ...
Thanks 🙏🙏 sir