I modified a few, using bigger Bakelite Hand Crank 25cm Wheel with a inner hole DIA 2cm to attach to the shaft on few of the 15K80, 15K91, and a Japanese Standard Sewing Machine. It sewed well even on 8mm thick leather.
@@sailingtessbesssewfarnorth1746 Fyi, please don't waste money to get those poorly cloned and Ch made vintage hand crank wheel, total piece of jxnk, lightweight and flimsy.
just gg keywords Bakelite Milling hand crank wheel. To be precise, the one I used is 250 x 20mm, Bakelite Hand Crank for Milling Machine Lathe Accessories
would the roller foot work on a singer 320k or 319k ???? if you cuold make a vid will be dope mayb if you make the stich length shorter b4 you turn left will even it out if you adjust the stich length then back to longer /were it was b4 may help dial it in not ideal but may work
@@sailingtessbesssewfarnorth1746 i repaired my dogs coller using the 319k in the treadle the stiches had come loose its a bout 6 to 8mm thick surprised the machine handle it it was at the limit for the machine im think the rooler foot would of been better what is the foot you are using an were do i get one i have order a vintage walking foot singer c70 from the 70s im see if that helps
I modified a few, using bigger Bakelite Hand Crank 25cm Wheel with a inner hole DIA 2cm to attach to the shaft on few of the 15K80, 15K91, and a Japanese Standard Sewing Machine. It sewed well even on 8mm thick leather.
Do you have any pictures or links, can you post to my FB group.
facebook.com/groups/1346509865787938/?ref=share_group_link
@@sailingtessbesssewfarnorth1746 Fyi, please don't waste money to get those poorly cloned and Ch made vintage hand crank wheel, total piece of jxnk, lightweight and flimsy.
@@sailingtessbesssewfarnorth1746 oh no, gg algorithm has removed my earlier comments.
just gg keywords Bakelite Milling hand crank wheel. To be precise, the one I used is 250 x 20mm, Bakelite Hand Crank for Milling Machine Lathe Accessories
Machine will not run last long if it using for leather... This one have a problem with thick canvas too if you trying make backpack...
why would the feed dog and presser foot have been modified?
The roller foot only contact one side of the feed dogs, so the other side had been ground down.
Perfect 201K setup for leather sewing....Cheerio!
would the roller foot work on a singer 320k or 319k ???? if you cuold make a vid will be dope mayb if you make the stich length shorter b4 you turn left will even it out if you adjust the stich length then back to longer /were it was b4 may help dial it in not ideal but may work
Yes it will work on 320 and 319, but must be as close as posible to the needle.
@@sailingtessbesssewfarnorth1746 i repaired my dogs coller using the 319k in the treadle the stiches had come loose its a bout 6 to 8mm thick surprised the machine handle it it was at the limit for the machine im think the rooler foot would of been better what is the foot you are using an were do i get one i have order a vintage walking foot singer c70 from the 70s im see if that helps
@@sailingtessbesssewfarnorth1746 th-cam.com/video/7OZqw8Ik9oA/w-d-xo.htmlsi=LiJYH-skxIr5Tx3d can you add two roller foots like this vidoe ??
Volume, hard to hear!