I absolutely love everything about this. The blaster is phenomenal, and watching the video gives me a greater appreciation for how you made this sexy beast of a blaster! Your work is so clean. Loved the way you put the video together as well! Astounding work all around man!
A quick eBay search and £30 later I have the Buzzsaw, Firefly and Retaliator Stock (won't find those in goodwill/charity shops here in the UK). Just trying to figure out cut lines from freeze-frames. Unfortunately, my Firefly is the promotional Iron Man one (N.R.F. 425) so the battery door is glued shut (no firefly tech or clear cylinder) . . . . . .time to get inventive for the 3S LiPo . . . Gah! just spotted the bit of Microburst Super Soaker . . . I need to design and 3D print something to go in that gap, it looks awesome . . . Thanks for the fantastic integration.
THANK YOU! You went old school! I love the kit bashing aspect tbat has been lost due to everyone 3d printing everything instead of using whats lying around! This is the SHIZNITDOODLEPOP!!👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊🎩🔥HEAVYSTARCH100!
After lots of use, the foam buildup lets that setup hit upwards of 150 FPS, I’m running a 42.5 aurora cage, fang rv, and bulldogs, and I hit about that with anything buy waffle tips, and accustrike darts
My question on an integration like this, is the blaster still able to be disassembled to access the internals? Say if something goes wrong or you wanna do an upgrade later on?
Nice build, but why sacrifice a buzz Saw? Those are quite rare if I recall correctly, oh and also, thanks for the painting guide, it's something I'm not that good at
Very impressive and nice work making it all fit seamlessly. I would like to see you build something like a M41 Pulse Rifle from Aliens. Add in a soundboard for the sound effects and you would be the envy of many a kid or old fart like me.
Absolutely beautiful! Question: is there any reason you leave the warnings on the gun parts? It would look more realistic without them. Regardless great job!
Thanks! Yeah I just see it as detail, they’re usually not readable by the end so they could be sci fi warnings or serial numbers. I sand some things off, depends on the project too.
Yeah they’re fully customizable with aftermarket parts, these ones were VERY tight to get on the motors so it would be inconvenient to take them on and off.
I absolutely love everything about this. The blaster is phenomenal, and watching the video gives me a greater appreciation for how you made this sexy beast of a blaster! Your work is so clean. Loved the way you put the video together as well! Astounding work all around man!
Fantastic looking creation with a fantastic build overview!
Bert????‽‽
hey beret
Sent the video to Captain X he would love this.
You went from level 1 crook to level 100 boss
XenoRaptor I like your profile pic
XenoRaptor its mafia
Seen it on Reddit and fell in love.
The master of creativity
Was back...
Hasbro wants to know your location
Your videos are very high quality and entertaining. Grear guide, I learned a lot. Subbed
This is why you’re my favorite artist on TH-cam. So talented.
Ima tell my grand kids that this is the greatest modder that i know
finally, an actually good nerf integration!
(Internally and externally)
A quick eBay search and £30 later I have the Buzzsaw, Firefly and Retaliator Stock (won't find those in goodwill/charity shops here in the UK). Just trying to figure out cut lines from freeze-frames. Unfortunately, my Firefly is the promotional Iron Man one (N.R.F. 425) so the battery door is glued shut (no firefly tech or clear cylinder) . . . . . .time to get inventive for the 3S LiPo . . .
Gah! just spotted the bit of Microburst Super Soaker . . . I need to design and 3D print something to go in that gap, it looks awesome . . .
Thanks for the fantastic integration.
How did you get that idea for the weathering? It's incredible!
I keep watching your nerf integrations. Keep making more!!!
It’s been a while! I’m hoping to get my blasters out to sell most of them, maybe I’ll see an integration possibility then
Wow, it looks incredible, I love it ♡
Great custom work man you should make more of these
About time... but i miss the dinos
THANK YOU! You went old school! I love the kit bashing aspect tbat has been lost due to everyone 3d printing everything instead of using whats lying around! This is the SHIZNITDOODLEPOP!!👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊👊🎩🔥HEAVYSTARCH100!
YYYYEEEESSS!! You're finally back!
After lots of use, the foam buildup lets that setup hit upwards of 150 FPS, I’m running a 42.5 aurora cage, fang rv, and bulldogs, and I hit about that with anything buy waffle tips, and accustrike darts
My question on an integration like this, is the blaster still able to be disassembled to access the internals? Say if something goes wrong or you wanna do an upgrade later on?
muselessmusician I know it’s late but in many integrations, the two halves are done separately so they still clamshell apart
I really like those weathering techniques you did :)
Where do you get your videos' soundtracks?
Canción robleis :v
Nice build, but why sacrifice a buzz Saw? Those are quite rare if I recall correctly, oh and also, thanks for the painting guide, it's something I'm not that good at
+Narendra Gunawan I see them at Goodwill all the time, also they're useless otherwise haha. You bet!
Ah yes, this ought to teach that drummer next door!
18 year old kids: Ha toys are for kids!
Me shows them this vid
18 year old kids: noice
Very impressive and nice work making it all fit seamlessly. I would like to see you build something like a M41 Pulse Rifle from Aliens. Add in a soundboard for the sound effects and you would be the envy of many a kid or old fart like me.
I'm guessing the application of the salt and soapy water prior to painting adds a weathered effect?
Yeah it’s for paint chipping, you can also do a brown layer under the metallic for rust
Haven't painted up an electronic blaster yet, but do you do any prep on the battery cage before painting or just spray it like everything else?
I think I just masked the metal parts with tape
That's a weird looking dinosaur...
You know that salt was used to dry pages that were written with a feather pen and inkwell because salt helped dry the ink faster but I forgot how.
Salt drains moisture.
this is true improvisation
How much is that gun I don't mind buying that for my alien fighting for earth invasion or others related to AVP kind of roleplay storylines
Absolutely beautiful! Question: is there any reason you leave the warnings on the gun parts? It would look more realistic without them. Regardless great job!
Thanks! Yeah I just see it as detail, they’re usually not readable by the end so they could be sci fi warnings or serial numbers. I sand some things off, depends on the project too.
Would you build The Bane from Borderlands 2? Please...
Awesome builds
This is like the 4th time I have watched this video
How to unjam the blaster? Theres no access door i think..
Would sand work as well as salt? Or would it be better for a different weathering effect?
+MegaGamerNick yeah, as long as it's coarse enough. Maybe decorative sand
Cool thanks
OMG you have a really nice gift
make more of this paint nerf guns
Nice mod
So you can just take the flywheels out and put them back in?
Yeah they’re fully customizable with aftermarket parts, these ones were VERY tight to get on the motors so it would be inconvenient to take them on and off.
You’re a genius bro
Kinda looks like the submachine gun from the turok game
Bro, where can I get one of these? I'll love to have at least two for play with mi cousin! Excellent job bro!!
What’s that song in the background?
very well done
Very inpressif and cool
perfect for borderlands
does a nerf dart tag hyperfire for the agent see?
+Player_Noob what?
this is awesome gun
always salt your blaster before boiling it!... wait a second.
Sounds like a friggin laser gun
What nerf guns did you integrate?
The Stryfe, Firefly, and Buzzsaw are the main ones
@@Kayakasaurus how much did you remove from the firefly back end, it looks completely different?
you could make a nerf to put on the arm
GREAT VID
11:05 weapon of mass destruction
Are those guns for sale?😁
i like that i qould see your face 12:57 xD LOL luv u
What did you just do to that disconnected blue stryfe?!
Discontinued*
It's okay though, the sacrifice was worth the result...
Officer i've been shot.
looks like a gun that could be in borderlands
This is awesome
I want one why can't we buy one
What a way to put 3 nerf guns to 1.
*7
The it almost looks like the Assault Rifle from Halo...
SWNerd97 oops I said that
Rampart 17 is that you ??
14:39 white dart goes somewhere
Try custom gundam model please
Galaxy Tab Gun ? x)
Wow not bad...
Not bad at all...
Sacrifice the many to make the few... or just 1 I guess
Está increible
Anyone else got destiny 2 vibes from the paintjob
*russian accent* Nice, you blew his brain out
Cool build
Like if you really like that nerf gun
Awsome!
It looks like something from borderlands
can you make a nerf BORDERLANDS 2 themed blaster #sorry for shouting
It looks like the assault rifle from halo
Todo genial hasta que la pintaste de azul 🥴
Good but the scratched up look kinda annoys me
Wow
Build for me
Watchinng this on a galaxy tab a
México México México... I no spek in English, está de huevos tu pinche custom brother, i am your fan. Puto el que de dislike.
I wish i had a dremel
mass effect auto blaster
This a different video from your other video's
To me it looks offbrand
Tasty
Are you a dinosaur channel?
+Apfeltee aqt sometimes
засколько продаеш
:D
Face reveal
First