I know this is already 3yrs old but I feel as if the front grill should have raptor sprayed on it but black. Keeping that texture on everything makes it 110% better.
So I did not have black tint available, the raptor black I had seen but it faded and did not look good. I agree I thought about the gloss black textured but the gloss broke it up a bit!
How many bottles did it take to do your 2 door? I'm prepping to do my 2 door JK soon and don't wanna pay for a ton of extra materials. I'm assuming I wouldn't need the full 8 bottles the 4door in the video needed?
That's awesome. I would love to do that when I get a jeep. I would totally do the grill in a black because it would match the fenders more than the gloss would. That's just my opinion though.
I thought you were making a mistake at first because the paint on the Jeep looked good. But when you finished it it looked amazing. Very good job looks extremely good and different. I love it.
1: I think you should line a grill in black. Take away that gloss bit still have the contrast. 2: How does it clean up? Assuming you off-road it atleast a little, how does the mud and such come off? Is it hard to get it totally clean or does a low power pressure wash do the trick? Very interested as I'm thinking of doing it to my TJ.
I debated the black grill but ended up keeping the tank colored grill. To clean is easy just power wash or spray with degreaser and power wash worst case use a soft bristle boat brush.
BC Bell as a jku owner I follow a lot of jeeps on TH-cam and you my friend have the most civilized comment I have read by far. You didn’t criticize or give suggestions. Not even a “why didn’t you...”. Kudos man
You should do a matte black grill to go with your fenders and bumpers. I like the glossy black, it just doesn't look like it fits the feel of the Jeep.
If you do a follow up video about how the Raptor Liner has held up to the sun and weather elements please also do a close up shot of how the door jams look. In your video youre spraying it with the doors still on the Jeep so I would really like to see how the door jams look. What about washing mud off or just using a rag to wipe the Jeep down? Thanx! Looks great!
Great looking Jeep I got a JKU Rubicon Recon in black I turned around on dirt roads in South Jersey pinebarrens and the damage the scrub oaks do to a paint job thats the way to go🖒
Raymond jones exactly I used to wheel up on the fireroads in Mahwah and took it down to barniget light to the beach down there, once I moved to Florida I went into this nature reserve called Corbett and you have to get through some real tight trails I had pin-striping all along the Jeep both sides
I love the liner on the Jeep not does it only look great it's very functional for protection. Also keep the angry grill on the black does break it up very well. Awesome!!!
I like it a lot. Right now my WJ is a factory greenish color with a little of metal flake all one color but I am going to paint my bumpers and side plastics with black bed liner now. Then when I'm ready I will try to find a close match to my factory green and mix it with bed liner.
Oh wow...I am speechless! It looks amazing! I love the gloss black grill, the red Jeep engine cover and the wheel and tire combo. I love the whole thing! Great job man.
David Froese thank you! I did make some changes check my newer vids I upgraded to 37s and machete beadlocks put the green grille back in and did the fenders in green and ... well you’ll see haha
Hey, Great Vid. I am about to raptorline my Truck. I have been sitting on the idea for a good while and the time has come to finally do it. Few questions. I don't think you mentioned how many bottles it took you for this application? How much tint was required? Did you do one or two coats? How has it held up over the year? If you had to do it again is there anything you would have done different? Sorry for all the questions. Thanks again!!
Hard to say which grill to go with without being able to see the color matched one on the Jeep to compare the two. Personally though I'd go with a flat black grill to match all the other flat black stuff you have on the Jeep, I think the gloss black looks out of place, although the contrast with the body color is nice. LOVE the new look though!
One question, after I first say GREAT job, it looks ridiculously good man! I see you sprayed directly onto the door hinges, did it affect their motion at all, chip at all during their first movements after spraying? Getting ready to spray my 94 bronco and am wondering how to go about the tire swing. Congrats again, terrific outcome!
One, it looks really good, no joke...Two, it truly only matters what you think about it, since it's your hard earned money and your Jeep! Last, keep that grill that's on there, my opinion, but you keep the one you want.
Came out great man! Kevin almost convinced me to do it too! Disassembling gave me chills after all the isht I put on. Your rig is bitching. Love the darker rapotor liner color. Won't get that yellowing when it gets dirty over time and the dirt settles into the crevices.
Can anyone comment on the longterm durability of Raptor finish on a vehicle. 3,5 or more years down the road. Also is there a recommended topcoat (clearcoat?) that will enhance durability and appearance. Thanks. Great video.
@@TMogo116 Thanks for your reply. I have an '02 Black Dakota Quad cab that I purchased new. It's in great shape, except for the failed clear coat. Black Raptor seems like the best option for appearance and economy.
mjnc367 its all in the prep I would suggest against black or white as they show the dirt the most, the black looks like a crazy stealth fighter though lol
EzEddie they will be coming! I recently moved to south Florida so we had rain season followed by hunting season nothing really crazy down here compared to say rausch creek up in pa but i will be taking some soon
This really looks good..at first I could see a stripping effect when you painted the passenger door but maybe that was before the second coat..It looks flawless in the sunlight...I have a Jeep project that is going to look like an extended cab M715 and also a Suburban modified to look like an Avalanche, and was thinking of coating them both with a dark gray Monstaliner...I had a Bronco that I used the Monstaliner on, and it looked good for a roll on, but a couple of the rollers begin to disintegrate and I had to pick out the pieces..maybe this Raptor liner is better...but if its urethane, that stuff is not good to inhale or get on your skin..even the fumes are bad for them eyes..I don't know, but that is what I heard..you haven't mutated into a zombie yet have you?
haha not a zombie so the trick is the very last coat you do a fluff coat so you stand back maybe 5 feet and light dust everything, the raptor has kind of a self leveling effect and you just fluff the whole thing and it will look flawless.
Looks beautiful! Grille does look a little shiny now that you pointed it out. You're right about the black grille, though. If anything, I'd like to see the grille in black raptor coat.
Trent Young thank you! A lot of people asked what color I was going to do I told them I wouldn’t change away from tank I love it to much it’s such a great Jeep color. Now I’m debating a tan top
Hey man, amazing Jeep!!! I am about to do the same soon, I have a question, where did you get the tint. I want to do a light grey but I want to make sure I used the correct tint, also how much tint do you put per can?? Thank you and keep up the vids!!
I wish manufacturers like Jeep would offer this straight from the factory. I think it would be a real hit for off-roading vehicles and construction trucks
Looks great! I’ll be doing this to mine in a couple of weeks. How much of the liner did you end up using and how many coats did you do? I only got an 8 liter kit. I think I might need more.
@@TMogo116 Hi - Great video. Thank you for making it. Couple questions - have you had any adhesion issues using 4 coats? I'd also like more coats for durability, but the manufacture says no more than 2 coats due to chemical build up between coats. Whats your thought on that? Also, I'm sure I missed it somewhere, but what PSI did you use? I really like that texture. Thank you!
Love the Jeep - Nice work - I customised my X5 and finished it with raptor (youtube X5 offroad beast - it's only a slide show), gets more attention at car shows than anything else there - will be doing more projects in the future.
absolutely fantastic! I've been looking at line-x for my off road gmc but the shops want $10 k to start. Can you get a smoother finish? I'd rather not have such an aggressive texture.
Awe yes! A hard candy shell 😂 I bet that the inside of that this is like a oven especially in that engine bay hopefully that’s a functioning hood letting the hot air out
How much raptor liner did you use? I’m trying to do my 04 F350 super cab (just the cab and front because I’m having a flatbed made). Not sure how much to buy, trying to gauge off yours
@@TMogo116 Hey I have a 2017 Granite Rubicon and going to do the Raptor Liner on it. So you dont have to use there tint colors you can use the stock color i.e. Granite, or Anvil, Rhino?
You guys did a great job on this! Don't see any striping so your over laps must of been right on. Thanks for the video & inspiration! Keep-on, jeep'n on!
The key with this raptor liner is after the last coat we crank the psi to about 100 and take a few steps back and lay a real light mist coat to make everything even
That’s Fuck@ng bad ass!!! Just motivated me to do my own. I went and got an estimate for the inside today. 750 bucks. After watching you , I’m sure i can do it myself for less. Then the exterior too!
Greg Strawn def! So the interior that is right around the prices I have heard as well, the exterior cost me about that in materials it’s a lot of work but it will be worth it I’m debating spraying my interior or my buddy has a roll on monsterliner kit I might use
Abigail Sockeye I did lol but I taped it first, stickers like that will not hold on to the raptor liner after it’s done I thought it came out neat at the end having it embossed
looks fantastic! Keep the black grill.... the contrast of it looks great with all your black parts, trim, and windows
Lonnie Sullivan I did for a bit but I put the green one back in with some black mesh behind it and really liked the look lol haven’t taken it back out
I know this is already 3yrs old but I feel as if the front grill should have raptor sprayed on it but black. Keeping that texture on everything makes it 110% better.
So I did not have black tint available, the raptor black I had seen but it faded and did not look good. I agree I thought about the gloss black textured but the gloss broke it up a bit!
That's cool! I might want to do that to my Jeep, but only years later after my paint has gone bad.
WALTERRIFIC yea mine was all pinstriped from the trails and I figured why not lol
It's a Mopar paint job, it won't be long.
It was some beautiful paint, but the end result was still nice. I pity the fool that has to grind that stuff off 10 years from now!
Hi nice job 👍😎
How many liters you use
Looks amazing. No more stone chips, rust, waxing. Low maintenance. Love it
Looks really good. Good spray pattern and the color looks better than other greens on here. Love it man!
Raptor Liner is the shit. i just did my 2 door JK a few weeks ago in OD green and my friends are still amazed at how good it came out.
Yea I get the same!
How many bottles did it take to do your 2 door? I'm prepping to do my 2 door JK soon and don't wanna pay for a ton of extra materials. I'm assuming I wouldn't need the full 8 bottles the 4door in the video needed?
That's awesome. I would love to do that when I get a jeep. I would totally do the grill in a black because it would match the fenders more than the gloss would. That's just my opinion though.
Dylan Foster agreed. Black raptor line the grill. The gloss has too much contrast
I thought you were making a mistake at first because the paint on the Jeep looked good. But when you finished it it looked amazing. Very good job looks extremely good and different. I love it.
Really LIKE that FACTORY color though, but I get it...who wouldn’t want a ‘kevlar’-coated Jeep (JKU in my instance)...
You rocked that RUBICON sign in the front
Thank you!
1: I think you should line a grill in black. Take away that gloss bit still have the contrast.
2: How does it clean up? Assuming you off-road it atleast a little, how does the mud and such come off? Is it hard to get it totally clean or does a low power pressure wash do the trick? Very interested as I'm thinking of doing it to my TJ.
I debated the black grill but ended up keeping the tank colored grill. To clean is easy just power wash or spray with degreaser and power wash worst case use a soft bristle boat brush.
Upol raptor liner is great but keep in mind its permanent. The only way to change xcolors is to shoot it again promting buildup of material
I agree
As a jku owner, I follow A LOT of Jeeps on TH-cam and I have to say, you my friend, have THE best looking Jeep I’ve seen! Kudos! Looks amazing! 👍🏼👍🏼😍
BC Bell thanks man! Really that’s awesome to hear!
I agree! #JeepGoneWild!
BC Bell as a jku owner I follow a lot of jeeps on TH-cam and you my friend have the most civilized comment I have read by far.
You didn’t criticize or give suggestions. Not even a “why didn’t you...”. Kudos man
You should do a matte black grill to go with your fenders and bumpers. I like the glossy black, it just doesn't look like it fits the feel of the Jeep.
Ah stay tuned for an update video as I am raptor lining the fenders this week .
The Jeep turned out sick af!!! I’d say go back to stock grill .. I personally don’t like the angry bird grill
I agree the matching green looked better.
If you do a follow up video about how the Raptor Liner has held up to the sun and weather elements please also do a close up shot of how the door jams look. In your video youre spraying it with the doors still on the Jeep so I would really like to see how the door jams look. What about washing mud off or just using a rag to wipe the Jeep down? Thanx! Looks great!
no rag as it will get hung up on the raptor but power washer works great with a soft boat brush or just spray with degreaser
That first sand contact hurt a little but it was suprising to see your commitment. Looks hella nice bro! You got a sub.
cautiontext Text thank you!
Looks great, if it was mine i would line the front grill in black and ditch the gloss black one
For now I have the green lined one in, I was debating lining the black one but its so nice in gloss lol for now its on my wall in the garage lol
Mines been lined for 6 years and its tough as nails, I hope your holding the title to that jeep.
yep shes mine
has it oxidized or changed color at all in that time?
Is it 6 years of Raptor Liner? I know they claim UV protectant, just would like to hear someone that has had it for a few years.
Has it faded?
what does something like that cost?
Jeep and Raptor liner go together like peanut butter and jelly.
That is Bad Ass. But i would flat black the grill just so it matches the fender flares and bumpers
I thought about it
@@TMogo116 how did you keep the Rubicon sticker on the hood pls explain trying to do mine but not sure how you did it to keep the original sticker on.
@@taulandradaj2001 watch the video... i taped over it and cut it out then removed the tape after
@@TMogo116 THANKYOU i thought doing it like that would have been covered from paint and not being
able to see it>?
Great looking Jeep I got a JKU Rubicon Recon in black I turned around on dirt roads in South Jersey pinebarrens and the damage the scrub oaks do to a paint job thats the way to go🖒
Raymond jones exactly I used to wheel up on the fireroads in Mahwah and took it down to barniget light to the beach down there, once I moved to Florida I went into this nature reserve called Corbett and you have to get through some real tight trails I had pin-striping all along the Jeep both sides
Very different to what I was planning on doing. I think my mind is changed! Thanks man. Nice work!
How does it hold up to mud? If you don't wash it off right away will it stain?
Looking good! Black grill looks the best 👍
for now I have the tank colored one in but I might rotate the black one back in. Not sure for now
That looks great, the black grill really makes it pop
Thank you!
I love the liner on the Jeep not does it only look great it's very functional for protection. Also keep the angry grill on the black does break it up very well. Awesome!!!
I like it a lot. Right now my WJ is a factory greenish color with a little of metal flake all one color but I am going to paint my bumpers and side plastics with black bed liner now. Then when I'm ready I will try to find a close match to my factory green and mix it with bed liner.
That sounds awesome
What’s the paint code for the green you used to tint the bed liner?
I think it is olive green raptor liner.
Please can you give us the code for PGK ??? thanks!!
Seriously what's the paint code
Yes please pain code? Good afternoon
Looks amazing. I'm not going to lie though the stock color is literally the only paint I'd prefer to this (even though it's the same color).
Thanks lol yeah I wasnt getting away from my tank color.
Great looking Jeep, well done! I've been wanting to do liner on my 2011 JKU...
Go for it! you wont regret it. There is no turning back once you start though lol
I also own a Tank JK and I like the way that turned out. I would keep the gloss black grill.
Craig Willcutt best color out there! Thanks I am keeping the black grill for now. I love both to be honest
how many bottles of liner did you use?
jcorriveau49 I did the whole Jeep the fenders and a set of half doors I used about 8 bottles but you can get away with 6
Oh wow...I am speechless! It looks amazing! I love the gloss black grill, the red Jeep engine cover and the wheel and tire combo. I love the whole thing! Great job man.
David Froese thank you! I did make some changes check my newer vids I upgraded to 37s and machete beadlocks put the green grille back in and did the fenders in green and ... well you’ll see haha
T Mogo116 Oh k ya this is the first video of yours I've seen so ya I'll check out the update!
Great job friend...jeep looking awesome
Would love this color on my JK. That green is great. Looks fantastic.
Thank you! It was my stock color Tank the paint code was PGK
Hey,
Great Vid. I am about to raptorline my Truck. I have been sitting on the idea for a good while and the time has come to finally do it.
Few questions. I don't think you mentioned how many bottles it took you for this application? How much tint was required? Did you do one or two coats? How has it held up over the year? If you had to do it again is there anything you would have done different?
Sorry for all the questions. Thanks again!!
How did it turn out?
Hard to say which grill to go with without being able to see the color matched one on the Jeep to compare the two. Personally though I'd go with a flat black grill to match all the other flat black stuff you have on the Jeep, I think the gloss black looks out of place, although the contrast with the body color is nice. LOVE the new look though!
8654 Zulu Foxtrot yea I went with the green
How well do you think this coating would hold up to off-road abuse...branches, rock scrapes, etc.?
Yeah, question. TOTAL cost for finished product?
about $800 in materials
@@TMogo116 That's really cheap for car paint. It looks really good! I love the color! The white Rubicon looked great also.
Stock grill for sure. The ‘meant face’ grills just look goofy to me.
I really like the liner paint and the matte finish. Looks boss.
One question, after I first say GREAT job, it looks ridiculously good man!
I see you sprayed directly onto the door hinges, did it affect their motion at all, chip at all during their first movements after spraying?
Getting ready to spray my 94 bronco and am wondering how to go about the tire swing.
Congrats again, terrific outcome!
the hinges were fine no issues at all. Thanks
Looks AWESOME!!! Keep the black grill on. Great contrast
Awesome man, i love it. Looks bad ass! i Raptor lined my interior not the whole jeep lol
Copperhead_jk lol that’s next for me
Cant wait to see that bro!
Where did you buy the custom color tint? Raptor only has like 15 colors. Is it just from an automotive paint store to make your own?
This was from an automotive paint supplier called finish masters.
Great job bro. Turned out great. Did the same on my hardtop
Thank you!
One, it looks really good, no joke...Two, it truly only matters what you think about it, since it's your hard earned money and your Jeep! Last, keep that grill that's on there, my opinion, but you keep the one you want.
Freedom Rider I put the green one back in with a black mesh grille and so far I have been liking that one more
T Mogo116....Well that still gives you some contrast and breaks up the solidness of it...Smile everytime you see it, huh?
Absurdly awesome!!!!!! Sweet rig , like the glossy black grill
Thank you!
I have watched several raptor liner installs and hands down yours came out the best.
Looking at doing this, and have watched a lot of videos. I think this is the best look out of all of them?
Thank you!
Came out great man! Kevin almost convinced me to do it too! Disassembling gave me chills after all the isht I put on. Your rig is bitching. Love the darker rapotor liner color. Won't get that yellowing when it gets dirty over time and the dirt settles into the crevices.
Coating looks awesome, but I hate those grilles. They look like the Jeep is scowling.
I've been debating this on my XJ. People say it looks hideous but I don't think so at all.
It depends on texture I have seen linex and hated it looked like boggers sprayed on it. I love this it was sprayed at 85 psi
Looks Great. I see its a low gloss finish! How did you achieve that, I thought the raptor liner was high gloss
maceybradley no binder in the tint and shot it at 85psi
@@TMogo116 I'm going to be painting mine soon here, I love this color and sadly wanna copy you lol ... but what is the binder in the tint?
Raptor liner paint job with a high gloss black grill.. very practical..
Kind of like a TH-cam account with no videos
Can anyone comment on the longterm durability of Raptor finish on a vehicle. 3,5 or more years down the road. Also is there a recommended topcoat (clearcoat?) that will enhance durability and appearance. Thanks. Great video.
mjnc367 the White Wrangler in the beginning had been lined for 4 years it holds up very well no clearcoat is needed as it will turn yellow
@@TMogo116 Thanks for your reply. I have an '02 Black Dakota Quad cab that I purchased new. It's in great shape, except for the failed clear coat. Black Raptor seems like the best option for appearance and economy.
mjnc367 its all in the prep I would suggest against black or white as they show the dirt the most, the black looks like a crazy stealth fighter though lol
I wish they would start making two door models again...this crew cab plague needs to end.
You got a nice ass Jeep man but do you ever take her off-road where’s the wheeling vids ?
EzEddie they will be coming! I recently moved to south Florida so we had rain season followed by hunting season nothing really crazy down here compared to say rausch creek up in pa but i will be taking some soon
What color is that if you don't mind going to do my 06 tj the same
This is the stock 15 color TANK the paint code is PGK
This really looks good..at first I could see a stripping effect when you painted the passenger door but maybe that was before the second coat..It looks flawless in the sunlight...I have a Jeep project that is going to look like an extended cab M715 and also a Suburban modified to look like an Avalanche, and was thinking of coating them both with a dark gray Monstaliner...I had a Bronco that I used the Monstaliner on, and it looked good for a roll on, but a couple of the rollers begin to disintegrate and I had to pick out the pieces..maybe this Raptor liner is better...but if its urethane, that stuff is not good to inhale or get on your skin..even the fumes are bad for them eyes..I don't know, but that is what I heard..you haven't mutated into a zombie yet have you?
haha not a zombie so the trick is the very last coat you do a fluff coat so you stand back maybe 5 feet and light dust everything, the raptor has kind of a self leveling effect and you just fluff the whole thing and it will look flawless.
Let's see your M715 project jeep
I love what you have done... I want to do the inside of my jeep.. get rid of the carpet.
Agree fully! I had pulled the carpet out of mine
This looks great!
Rich Beach thank you
Should have sprayed the fenders black as well as the wheel wells
Oh snap it looks good! Whats the color name/code :)?
its called PGK Tank.
Looks beautiful! Grille does look a little shiny now that you pointed it out. You're right about the black grille, though. If anything, I'd like to see the grille in black raptor coat.
Did you clear coat it? I’m about I do my Dakota charcoal grey.
Micheal Scott no the product has uv blockers in it
Wow.
Wanna do that to my 2021 Toyota Tacoma TRD 4X4 OFFROAD Premium.
Man, it looks good 👍
Paint tint? The PJK tiny, is that made by raptor liner? Or can you use any tint brand?
2k acrylic paint, or any urethane or acrylic paint tint can be used
... looks fantastic.. can you tell me the tint code? You give 75ml of the tint in each bottle?
Jeep looks awesome! Just curious how many liters did you use?
Baldo Bazan 8 total
It looks incredible. My favorite Jeep color. Will be well protected when out wheeling.
Trent Young thank you! A lot of people asked what color I was going to do I told them I wouldn’t change away from tank I love it to much it’s such a great Jeep color. Now I’m debating a tan top
Hey man, amazing Jeep!!! I am about to do the same soon, I have a question, where did you get the tint. I want to do a light grey but I want to make sure I used the correct tint, also how much tint do you put per can?? Thank you and keep up the vids!!
juanangel86 I got it at a place called finishmasters I used about 75ml per bottle of raptor
I wish manufacturers like Jeep would offer this straight from the factory. I think it would be a real hit for off-roading vehicles and construction trucks
Looks great! I’ll be doing this to mine in a couple of weeks. How much of the liner did you end up using and how many coats did you do? I only got an 8 liter kit. I think I might need more.
I used 8 bottles of raptor it was about 4 coats I would say
@@TMogo116 Hi - Great video. Thank you for making it. Couple questions - have you had any adhesion issues using 4 coats? I'd also like more coats for durability, but the manufacture says no more than 2 coats due to chemical build up between coats. Whats your thought on that? Also, I'm sure I missed it somewhere, but what PSI did you use? I really like that texture. Thank you!
Love the Jeep - Nice work - I customised my X5 and finished it with raptor (youtube X5 offroad beast - it's only a slide show), gets more attention at car shows than anything else there - will be doing more projects in the future.
absolutely fantastic! I've been looking at line-x for my off road gmc but the shops want $10 k to start.
Can you get a smoother finish? I'd rather not have such an aggressive texture.
The higher the psi you shoot at the less aggressive it will be
not even a jeep guy but that thing is badass
Keep up the good work my boy, love the vids
Anthony Ortiz thank you man I’m trying lol
I did my fenders, bumpers, and hardtop in black raptor liner.
Quick question about the liner. Did you just use auto paint for the tint? What is the appropriate mixture ratio
I used automotive paint tint, I bought it from a auto paint supply store, I used 75ml of tint in each bottle of raptor.
Looks brilliant mate. Great job. Going to do my TJ up in black liner after watching this!
fantastic job
Thank you!
Looks great, I am gonna spray two colors with the Raptor system on my Jet Ski
that sounds awesome! if you can tag me on instagram I want to see it @tmogo116 or #tmogo116
Looks great I love it you are very brave. I have a Rubicon scare to do that.
Rving With The Rivera's lol my paint was already scratched from trails I figured it couldn’t get worse
Awe yes! A hard candy shell 😂 I bet that the inside of that this is like a oven especially in that engine bay hopefully that’s a functioning hood letting the hot air out
How much was it?
2017 Jeep jk materials came to about $800
@@TMogo116 what is the color code? If you don't mind
How much raptor liner did you use? I’m trying to do my 04 F350 super cab (just the cab and front because I’m having a flatbed made). Not sure how much to buy, trying to gauge off yours
Andrew Whelan I used 8 bottles counting the whole Jeep plus my halfdoors I would guess around the same maybe even less for you
T Mogo116 awesome thanks brotha
Looks amazing! Thanks for the links, did you bought the tint through mopar directly?
TRAIL HUNTERS 4X4 OVERLAND I got it from a local automotive paint shop
Great job. That jeep looks bullet proof man. Awesome.
R Perez thanks man!
Looks great👍🏻
KingsDisasterGarage thanks man hopefully will look even better for Jeep beach
Make sure you do an update down the road to see how its holding up.
Def will!
@@TMogo116 so how's it holding up?
How much was the "tank" paint from your auto paint shop?
About $100 for a quart
@@TMogo116 Hey I have a 2017 Granite Rubicon and going to do the Raptor Liner on it. So you dont have to use there tint colors you can use the stock color i.e. Granite, or Anvil, Rhino?
Absolutely amazing job, in love with the outcome will be doing my Jeep as well as my fathers jeep this. Thank you for the video.
Thank you! let me know how it turns out! tag me on instagram if you post pics @tmogo116 or #tmogo116
T Mogo116 how many bottles did you have to have to do the Jeep. I’m doing mine. But there are no doors and I’m also doing the inside.
That grill looks great.
Rving With The Rivera's thank you!
T Mogo116 . what is the color? I want the same color...
Looks great thinking about doing mines also
Do it!
Fuckkkk, looks sick. Awesome Jeep man. -CJKC
Luke M thanks man!
You guys did a great job on this! Don't see any striping so your over laps must of been right on. Thanks for the video & inspiration! Keep-on, jeep'n on!
The key with this raptor liner is after the last coat we crank the psi to about 100 and take a few steps back and lay a real light mist coat to make everything even
Hey man im from nj too... i want to do the same
The Ginz I moved to Florida but yea I grew up in Bergen county, go for it!
That’s Fuck@ng bad ass!!! Just motivated me to do my own. I went and got an estimate for the inside today. 750 bucks. After watching you , I’m sure i can do it myself for less. Then the exterior too!
Greg Strawn def! So the interior that is right around the prices I have heard as well, the exterior cost me about that in materials it’s a lot of work but it will be worth it I’m debating spraying my interior or my buddy has a roll on monsterliner kit I might use
Just paint over that Rubicon symbol.
Abigail Sockeye I did lol but I taped it first, stickers like that will not hold on to the raptor liner after it’s done I thought it came out neat at the end having it embossed
Looks good partner 👍
No why would he want to do that. Makes it pop the way he did it.
looks tough AF. way better than stock paint
psy06 that was the goal! Thanks man!