$5 WiFi Camera Setup | ESP32 Wifi Setup view on Mobile phone
ฝัง
- เผยแพร่เมื่อ 2 มิ.ย. 2024
- Camera setup, upload using USB UART or using Arduino board, pins explained. Current is measured.
The best thank you for me is to not to skip ads and Subscribe 🔔 to my channel, like 👍 the video It is greatly appreciated. 🔔 😊.
I will reply to all Subscriber's 🔔 questions. So make sure to Subscribe and enable the bell 🔔.😊
Get code and resources for this video: robojax.com/L/?id=70
*** Free Course ***
Arduino Step by Step Course (over 100 lectures) Starts here • Lesson 00 What is Ardu...
**** Purchase ESP32 Camera from:
Amazon USA: amzn.to/3kHfwyS
Amazon Canada : amzn.to/2HOVg0b
Amazon all European Countries: amzn.to/3jDp8cQ
AliExpress: s.click.aliexpress.com/e/_AXU5Dt or s.click.aliexpress.com/e/_A0MYHO
Banggood: www.banggood.com/custlink/KDG...
** Purchase Arduino Start Kit **
Amazon USA: amzn.to/3z88F9G or just UNO board amzn.to/3aY7KOL
Amazon Canada: amzn.to/31an88J or just UNO board amzn.to/3pYxSNN
Amazon Europe (all Europe): amzn.to/3pMCHge or Just UNO board amzn.to/2PgGItD
AliExpress: s.click.aliexpress.com/e/_9uc7Xe
Banggood: www.banggood.com/custlink/3GD... or UNO board www.banggood.com/custlink/vKm...
eBay: ebay.us/B1JWLi
***** Purchase Authentic Arduino Uno from ***
Amazon USA: amzn.to/2KApAwK
Amazon Canada: amzn.to/37LZ8sW
All Europe Amazon: amzn.to/36YDSzn
Jump to different section of video by clicking on the time:
00:00 Start
01:00 Introduction
05:50 Wiring explained (with USB)
09:30 Wiring with Arduino UNO
10:41 Preparing Arduino IDE
12:41 Code example
16:00 demonstration
20:10 Uploading using Arduino IDE
22:05 ESP32 Camera Current measurement
Tutorial by Ahmad Shamshiri form Canada
****************************
Arduino Step by Step Course (over 100 lectures) Starts here • Lesson 00 What is Ardu...
Learn Arduino in 30 Minutes (video): robojax.com/L/?id=135
****************************
If you found this tutorial helpful, please support me so I can continue creating contents like this. Here is PayPal link paypal.me/robojaxTV
Follow me on Facebook robojaxTV
Follow me on Twitter: / robojaxtv
Follow me on Instagram: / robojax
Tutorial by Robojax.com
Get other projects code and learn Arduino
robojax.com/learn/arduino
#robojax #robojaxESP32 #robojaxCamera - วิทยาศาสตร์และเทคโนโลยี
Great video!
I love how you're to the point and cover a lot of information! Thanks for all your hard work on these videos, they have helped me get into arduino.
Good to hear that. I am pleased to know to be helpful.
Oi tudo bem gostaria de saber se tem possibilidade de funcionamento com display tipo touch screen tem como mandar o código desde já agradeço pela atenção
Man you just save my life, my camera came disconnected and when I tried to connect I just cannot do it right. Until I saw your video I realized that I did not open the brown connector completely.
Cheers from Mexico!
Good work my friend.
You mean the GND / GPIO 0 connection - I was having the same problem.
Great tutorial, I've been waiting for this
thanks man I have watched all other youtube videos and you only the one who helped me :)
keep going!!
You are welcome. I am glad it did. See my other videos. I am writing codes for many projects that do not exist.
Had you have to swap rx/tx wires, or it worked exactly as was shown in the video?
When i see a robojax video about a project, i know i will figure it out, thank you Ahmed.
that's very kind of you. Thank you.
I've following you videos for some time now and am glad you've started to come in front of the camera as well :)
Welcome aboard!
Excellent video! Thank you for being so thorough!
You are welcome. Thank you for not skipping the ads and keep watching them. This will help me a lot.
interestingly seems to be the only video that shows how to properly connect the camera to the board - prior to this, I was (stupidly) trying to just shove the connector in - didn't realize there was a latch that flips up. thank you!
You are welcome. I am glad you found it useful.
Nice job!!!Thanks i have always trust your video. Keep it up nice seeing your face.
You really presenting it great!! Again thanks for sharing. :)
You are welcome. Thank you.
@@robojax hi can you help me to my problem because I encounter a problem fatal error: dl_lib.h: No such file or directory
Thank you! The 0x2004 error was killing me. Your video saved my project!
I am glad it helped. Here the better camera with usb without all the hassles th-cam.com/video/RCtVxZnjPmY/w-d-xo.html the link to purchase is in description of the video
Great job, very clear explanations. Thanks a lot!
Upvoted because this was the first video showing how to install the camera.
Exactly,
I was unable to find any other tutorials that showed how to move the grey pins, I was worried that I would break it or tweak it wrong and break the board. This video helped.
2:42 Added time in video where it was described.
I felt kind of foolish that it didn't occur to me to lift up the grey bar...but I'm glad I wasn't the only one. Thanks! :-)
Thank you very much, this is the video about ESP32 that I saw and it has also been very clear. I have subscribed
Awesome, thank you!
Awesome Clear Video from Robojax again...
Glad you liked it!
Best esp32-cam tutorial on youtube!
Thank you.
Great video and you have a very relaxing voice. Cheers!
Thank you! Cheers!
سلام . واقعا عالی و مفید . تشکر از لطف شما
وعلیکم السلام. خواهش میکنم. سلامت باشید.
سلام علیکم. مجرا (کانال) فارسی علم و فن را راه اندازی کردم: لطفا به دوستان تان خبردهید و حمایتم کنید.
www.youtube.com/@ilmofan
Well explained and documented, thanks very much.
You are welcome. Glad it was helpful!
Well explained and presented.
Nice explaining in detail, thank you.
You are welcome. You haven't subscribed to my channel. The best thank you for me is to subscribe to my channel and thumb up the video. It is greatly appreciated. 🔔 😊
Nice video very well explained thank you, i couldn't do it to work a year ago , now i ll try again. THX
You are welcome. Please try and updated us here.
@@robojax Hi ok, like i say I tried to doing to work. And i Couldn't at onece. Take me 2 errors....1st Camera init failed with error 0x20001 or similar so y disconnect the cable of the camera and reconnect it, and then didn't work again, take me a 2 error. So... 2 error was Brownout detector or Guru meditation error, Fuck?¡?. I was unhappy but y look again in Trouble Page Esp32 and solve it. The 2 error was bad cable or connection, so y had a long usb cable that doesn't put enough current to my Esp32.
That day i couldn't again make it to work.
The second day bought a short good cable and Boua👌la worked !!! So patient and effort solve the problems .
So this is the page for Trouble. randomnerdtutorials.com/esp32-cam-troubleshooting-guide/ Bye good Luck
love your video, you got a new subscriber
Thank you very much. Thank you for not skipping the ads and keep watching them. This will help me a lot.
Thank you very much for making this
My pleasure!
Thanks a lot.
Actually after uploading and doing all the stuff you mentioned I got the error of Brownout Detector just before attempting to connect to WiFi which resulted in reset on and on. And the problem only got resolved when I powered the esp32 with 5V instead of 3.3V.
(I selected the board AI Thinker ESP32-CAM and I chose this line of code
#define CAMERA_MODEL_AI_THINKER)
it seems the 5V is not stable or have enough current. try different 5V source.
Your awesome man!
So are you. Thank you for not skipping the ads and keep watching it. This will help me a lot.
Bonito video , un claro ejemplo de cuando la tecnologia esta al alcance de la gente que quiere experimentar , siempre tan completos , me gusto mucho , Gracias !!!!
Bueno oír eso. De nada.
Great education , thank you a lot .
You are welcome. Here the latest camera with USB board th-cam.com/video/RCtVxZnjPmY/w-d-xo.html
Thank you for the excellent tutorial.
Please let me know: Does the video stream goes through the UART? or the WiFi?
Is there such an option to stream the video using CP2108 module (UART) ? If YES, can you recommend how?
you are welcome. it goes through the IP address to the web. There are specific cameras that stream to the serial port where you can view them via USB. I might make video. but I have no video at the moments.
great video! Could you find out if there is any way to display the image of the camera on the ESP32 on the ISP screen of the last video?
Thank you. I am getting SPI screen. This semester I will be very busy with "Mobile Robotic Systems" class.
Thank you so much of your excellent video, it was very helpful.
Glad it was helpful!
It's very helpful to embedded engineers. And maker hobbyist.
Good to know. thanks
This is very helpful... 👍
You are welcome.
Thanks! Your video is very didatic.
Glad it was helpful!
Thank you very much sorted ssid wrong corrected it and it works great thanks av been at it weeks
you are welcome. I hope you've subscribed as your subscription help my channel grow. Thanks
Don't test it yet. But you made a good job. Greatings from Germany.
Greetings. Thank you very much. I can assure you it will work.
You are the best.. !!!!!
So are you.
U r just awesome sir. Keep it up, n sir plz make a video on blynk app's video streaming concept.
So are you. Thanks. Blynk is paid service and I don't like it. They should offer free service.
Nice one sir
😊
Excellent explanation. I have questions regarding esp32-cam:
1. How to add date and time on photos? (without internet connection usage purpose)
2. Is it possible to use external sd card module? (64 GB)
3. How to link esp32-cam with temperature sensor (MLX90416)?
Looking forward to your reply. Thank you.
Hello, thanks. Other please respond 1-I have no idea 2-You can use SD card with ESP32 yes 3-what do you mean link? the sensor is just sensing here the latest video with precise and longer range th-cam.com/video/jN86PSAHMbw/w-d-xo.html
Hi Sir, 3 - actually to 'incoperate' the image captured by ESP32-Cam with MLX90614 temperature reading and saved on external SD Card module.
I am still working on it but not able to send the MLX data to ESP32-Cam.
I love your tutorial. contain a lot of information and the way you pace it, allow me to really understand it.
Awesome, thank you!
Maybe check the outputlevel of the usb-serial TX pin.Might damage cam's RX input.
Thank you!
You are welcome. 😄
Hey guys, I am writing this to help others who run into the same problem "Brownout ...triggered". This is caused by low voltage coming from the FTD programmer on the 3.3V rail. As a solution I switched the jumper to 5V on the FTDI and moved the wire over to the 5V pin on the ESP32-CAM. Everything works fine now!
Thanks for sharing your experience.
thanks for the video, can you help me with an error that appears when I try to start the stream please? the error say [E][camera.c:1483]esp_fb_get(): Failed to grt the frame on time! Camara capture failed
Thanks all working on my computer and phone
You are welcome.
Great video! Pardon sir, I want to ask to you, why i have error, it say "esp_camera_fb_get(): Failed to get the frame on time! Camera capture failed. What wrong?
I have not seen this error, if someone else has seen it should reply.
Good video.. !!
Thanks.
10:00 RX - TX should be swapped on different sides. Are you sure all ESP32 5v tolerant on inputs (rx/tx)? Glad to see your Tinker alive! 😁👍
on page 14 of datasheet here www.espressif.com/sites/default/files/documentation/esp32-wroom-32_datasheet_en.pdf the absolute maximum is listed 3.6V. When I was recording the video, it missed the difference in voltage and as you saw the test worked. the upload last about 30 to 40 seconds. Perhaps it can tolerate it. But not the right approach.
@@robojax had found this awesome article on level translations: next-hack.com/index.php/2017/09/15/how-to-interface-a-5v-output-to-a-3-3v-input/ And as for me, I have some level shifters and I will start from using them.
Thank you. Here I used to share this image with people when they need it. snipboard.io/gJXm0c.jpg
Hello,
I have a question please, do you know if an unofficial copy of the arduino uno works with esp 32 and TTL programmer for this project? thank you
Hello, Yes it will work I have shown it in the video. Doesn't matter which arduino you use. The best thank you for me is to Subscribe 🔔 to my channel and thumb up the video. It is greatly appreciated. 🔔 😊.
I will reply to all Subscriber's 🔔 questions. So make sure to Subscribe.😊
Hi, in the compilation of the sketch it gives me this error (#include "camera_pins.h"), how can I solve? Thank you.
Thank you so much for sharing.
Can you please explain for me about the comment on the issue with the 5 volt and using the 3.3 volt that was posted by ChupoCro below my post here 3 days ago.
I am a little confused about what i need to change or do as i am still a newbie to Arduino programming.
Thanks again for a fantastic job.
Regards
Dave
You are welcome. it is about the tolerance of the input. the module is made for 3V maximum and when you use Arduino to program it, the voltage goes to 5V which might be harmful and damage the ESP32. But when I did it, the module survived. The best option would be to do level shifting like this snipboard.io/gJXm0c.jpg
@@robojax I would like to know whether it is unnecessary to consider the problem of high voltage of 5v when usb-ttl is directly used,thanks
Great video!
Hello, I need help. Maybe you can recommend me something concrete or at least make some suggestions in both the HW and SW parts. Any help is welcome. I need to set up a kind of surveillance/streaming system for a project at my school. I would very much like to do it with something like ESP32-EYE or ESP32-CAM. My intention is to stream (or as close as possible) on TH-cam or FB directly from the module. I am not sure if that is possible and how to do it. I am very tight on time, and I don't have much money for testing either. I know that you have a lot of experience and have tested many modules. Please, which ESP module/camera/software could I use for that? Thank you very much.
this doesn't seem simple. You need to implement API for TH-cam and Facebook. I have no time but let's hope if someone else offer help.
@@robojax Como podria hacer streaming video desde el ESP32 para reproducirlo en un VLC por ejemplo?
great video all
seems to work , but i cant acess the server and in the serial monitor i just getting is a lot of strange stuff like questionmarks arows squares etc. any sugetions what to do?
see this image snipboard.io/y3pKwG.jpg
hello, i want to ask what i could do to get the wifi to connect. I have added external power supply just like what others recommended, but it gave weird output. (could not understand the output square square ....) i hope you can help me
did you solve the problem ?
Great!
Thanks.
Thank you . If I use arduino uno to upload the code, will i need to have the cp21O driver installed?
hello, if you can upload the code to your Arduino, then your system is ready and don't need anything else.
good video.
Here are the better latest ESP32 Camera th-cam.com/video/RCtVxZnjPmY/w-d-xo.html nothing else is needed. USB included.
can we use, "esp32 cam", bluetooth and wifi for others project!
e.g Bluetooth control remote car etc
yes. you can .
Great video with excellent explanation, may you please point me to the tutorial to remotely access the camera via Internet. Thank you.
There are tones of videos on how to connect to your home network from internet. I might do it but I am not sure.
Look up dyndns and port forwarding. That's pretty much all you need to know.
You'll need to give remote access through your router. This is really dangerous for security reasons. Only do it if you know what you're doing!
Hi! How to set default resolution (e.g. 800x600) for video at the start of ESP32-CAM ?
Hi, The frame size is set in the code by changing this FRAMESIZE_UXGA to something else. It has been used in library line 103 here github.com/espressif/esp32-camera/blob/master/driver/include/esp_camera.h so you replace UXGA in FRAMESIZE_UXGA to SVGA which becomes FRAMESIZE_ SVGA and 800 × 600 (SVGA) is mentioned here en.wikipedia.org/wiki/Graphics_display_resolution I have updted the page for this camera on Robojax.com with regards to changing the frame resolution
I hope it helps you.
I am an old time programmer from the Borland and Apple Pascal days. Can you advise me if IOS or Windows would be easier to use. I don’t even know how to get to a cmmnd line any more. I want to build an esp32-cam camera with its own WiFi to connect to remotely on my boat. I have the board and wires and an FTDI board. Just a little guidance.
Thanks,
Joel
Just search for python esp32 or microPython and you can find tones of examples.
@@robojax thanks
I got the example to compile but then I got a fatal error saying”failed to connect to ESP32”. I have an extra ESP32 module and another USB IDE AND THAT FAILED AS WELL. I doubled checked all my connections and they look correct. I even pushed the reset button but no luck. Any suggestions?
I tried it with my MAC book air and with Windows, both not good. Again, thanks for your help, Joel
most of the time is it power or voltage. Check your power supply. just use separate 5V to see if it works.
I need some help. I have installed and adjusted settings, however I can't choose an COM port. I've tried installing USB serial drivers (3 different, non helped) but I still can only see a Bluetooth and a wireless. i am using a mac. i hope you can help (:
Hi, it is the driver issue with USB. I am not sure what USB chip your module has. it should be either CP2102 . if so you can download it from this address which I googled it "cp2102 driver mac" www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers or if it is CH340 you may look and start from this paged learn.sparkfun.com/tutorials/how-to-install-ch340-drivers/all good luck.
Hi
I am very new to this, by watching the video, I bought
From Ali express, I try all possible by readings and watching posts and articles to install and make it work. the only success I got is a USB port connection. If you can get me a proper board selection from the board manager and how to get it to work on my laptop and on mobile APP.
sir i need a better resolution camera module with a telephoto lens and i want to know if there are choices for replacing this camera module with another one? Is it possible to do so ? if not do i have a choice?
Hi, I have not seen such thing. you have to build your own or use a digital camera. I am not sure of it.
@@robojax sir can i get some help on interfacing smartphone camera modules (like the oppo reno 10x zoom telephoto camera) and try to connect it to esp32?
Great Video!!!! I have one problem..... When I check my esp32-cam port, it reads "PL2303HXA Phased out since 2012. Please contact your supplier" and my drivers are up to date? Any idea why this would happen?
I have not experienced this. May be someone else reply to this.
Yes i had this problem, it's due to using a clone FTDI. there is hope! here is a video for the workaround. th-cam.com/video/m1RTEAo6jRI/w-d-xo.html It's been such a battle to get this going. ROBOJAX, i hope you see this. I have a question. the video page you show in the above video has controls, which adjust parameters, light etc, but i cannot find any such page using the code you supply in your tutorial. i just get the video stream. Also i dont get the two ports that are shown when you upload to the esp32, 80 for static and 81 for video. where do i find that code please?
How do you connect esp32 cam with your pc..i cant understand to i need an ftdi and then an ftdi cable or i just connect ftdi programmer with pc ?
I can't explained with text. I have explained it in video. Also I have typed the subtitle text. Translation is also available in most languages. Please watch the video again. You will know it.
upload using Arduino UNO 20:10 , you set board is Arduino UNO or ESP32 Wrover Module on ArduinoIDE program???
You set to ESP32. Setting it to ESP32 makes Arduino IDE to know how to send data to ESP32 module.
Thanks a lot.
you are very welcome.
the only video that showed how to insert the camera. hey, when its your first one you don't know. i believe i got everything correct but the video doesn't come up in any of my browsers. any thoughts?
Try different browser. it might be browser issue. Use Edge or Firefox or if you haven't use them.
good tutorial
Thank you.
Hello! Is it possible to use another Omnivision camera with the ESP-CAM?
if specification matches, it should work.
Can you indicate the video in which you can use the ESP32 CAM and view it from anywhere other than in my local area? In addition, it has been commented that in order for the external antenna to work, it must follow one step, say where you explain it from ...
Thank you
You can search for "how to connect to my home network from outside home" and follwo the video (not my video) and once you implement that, then you can connect this camera from anywhere.
@@robojax thanks
And what about the external antenna for the esp32 cam?
I have mentioned it in the video, but did not do it,you can connect but have to disconnect the antenna on the module. Google it or Bing it you might find solutions.
Thanks for the video. Is there a second video for how to Connect over the Internet?
If not please create one, also are there any free Pins to add sensors?
I am planning to make solution for over internet view. Yes all pins are available as regular esp32
Thank you very much for the explanation, teacher, I loved the video, I'm a big one on the channel, but I have a question
How can I view images from the camera while on another network, ex: through my 4G and I see everything that happens with esp 32 in my house that is connected to wifi
You are welcome. How to connect to your home network needs different settings for each router. So search for “how to connect to my home network from outside home” and hopefully you find the solution.
@@robojax Thankyou
@@robojax One last question, professor, how can you make esp 32 cam create your remote network, or you don't need to connect to my home network, or esp create a network and I log in to esp network, which command line have to add, thank you very much
Thank you very much for the explanation, I loved the video, I'm from Brazil and a big fan of your work, but I have a question
How can I view the camera while on another network, ex: through my 4G and I see everything that happens in my house
you are welcome. Please search for "how to access my network from outside home" or "remote desktop from outside home" and you will find tones of videos.
Thankyou
Hi !
If I don't have an arduino, can I make Cam ESP 32 settings?
Is there an option for motion detection?
If a thief enters my yard and steals my camera, can I see the recordings on my server / my cloud ?
Thanks !
Hi, this is just basic camera and no detection because there is not processing power. For the rest please watch the video.
@@robojax
I saw all the video !
But the information is summary.
Thanks for your reply.
Hello, I CONGRATULATIONS you on your very detailed video. I would like to know if I can add a PIR sensor with this code.
Hello and than you. Sure you can do it. this is just regular Arduino code.
At 16:40 is the ESP32 module still connected to laptop through FTDI (I mean is it transferring through RX-TX)? From 19:00 to 20:00 Does it require internet connection to work or a wifi connection with/without internet connection is enough to work like this after uploading the code?
Can you please provide the link of the video you mentioned at 1:35
for this to work, you don't need internet.
the other video, unfortunately I did not get a time to make it yet.
@@robojax Thanks for the reply :)
Hi Sir, I followed all your steps. Finally on the serial monitor shows the "detected camera not supported". Can help me tackle the issue? Is it something to do with Wi-Fi? because I'm using my mobile data as hot-spot.
Hi, no it has nothing to do with WiFi. Check the camera. You have a different camera. or select different camera option.
@@robojax where can we find the correct module to use? I have the ESP32-S not "ESP32 Ai-thinker" any help please? It says it flashed. chip is "ESP32D0WDQ6"
不错不错！！
没有坏并不意味着好。 是吗？
Thank you for the video. Im not sure why, but im getting the fatal error message like i have every time Ive tried this.
Has anyone else see the fatal error? please share solution if you know.
well, my ESP32 camera is not connecting to the wifi. Any idea, btw my camera model says HW, instead of AI thinker. Do you think that maybe the issue? Please let me know.
look at the SSID. the upper case and lower case matters. "mywifi" is NOT the same as "myWiFi" check that out. Camera has nothing to do with WiFi.
Hi Great Tutorial very well explained.... It should work the same to add it to my blynk app right??
Thank you. Never used the app you mentioned. How much are you paying? I tried it and they don't have free version. so never used it.
@@robojax its free... you load blynk in your phone and load the devices... if you want your own downloadable app then you have to pay... but for prototyping in IoT works great
I don't like it because they don't offer any free version or option for few days or month.
My espbord is from a brand called "Hiletgo" can I use the AI Thinker board Library with this?
Please can anyone help
Working now, many thanks, but returning it as the camera body has been cracked when the lens was screwed in, no focus!!
You are welcome. yes that happens. :(
Thanks Ahmad, when compiling i got errors about changing type from const char* to char* for the SSID and password, so i changed their type to be char*, and now get the error : Error compiling for board ESP32 Wrover Module. I am using the Uno to upload rather than the UART converter.
Hello, it is possible the module does not receive 5V. the voltage might goes low. Try separate stable power source.
@@robojax Thank you i'll check.
hello sir..i can't install library ESP32 in my arduino.why?can help me?
and 1 question, if i use ESP32 CAM, i can snap picture via my app in my android?
Hi, no you can't take picture on the phone. You may use snapshot of screen.
can you help me? everythins is working great until the serial monitor step, arduino IDE doesnt display anything there
either error in code, wrong module, wrong settings or wrong Baud rate of serial monitor.
Nice 👍
Is it possible to get it work over the internet, so than I can use it on my android phone when I'm not at home?
you can search for solution on "how can I access my computer over the internet" . the whole point it that you can find your home IP address easily. I am paying $25/year for a service from no-ip.org and it works with my router where I can access any device from anywhere.
@@robojax hi, thanks
Hi
I finally got it working but I have a new problem, if the esp32cam gets disconnected it won't reconnect to the router/hotspot/network automatically and I have to reach the esp32cam and restart it by hand. What if I want to fix it in some place high? Do I really need to restart it every time? Can't it just get reconnected to the network like any other normal device?
And btw can I add multiple network credentials to esp32cam code so if one is not in range it would connect to the other ones.
Yes. reconnecting is issue with most WiFi modules and I have to write code to resolve it. If you see my other ESP32 related videos. specially the introduction, you can learn how the connection happens and write your own code.
@@robojax thanks for the answer, I'll watch your videos and see if I can solve the reconnecting issue.
Im not sure what I misse, but I followed instructions step by step (using a uno r3 as the programmer) but it times out or gives me errors when i try to upload
Check the wiring then. Also your arduino driver must be sim stalls dnd port must be active under device manager. It should work
good morning bro. With this can i record videos on my mobile phone, cause i want to use it on my drone.
No you can’t
Youre so good at explaining could you do a tutorial on rgb p40 64x32 using esp8266 thanks stewart
thanks. I just checked and it cool display. I have over 100 projects on hand to finish. I am berried under them. Once finished, I will come to that. I will put on my "to do list".
@@robojax oh thanks i am nearly 70 years old and have all ways dabbled its so interesting and soothing its a passion you either like it or dont i use to do wood carving and bigger projects i built my own workshopits got everything hope you do that tutorial cant wait av jus completed a 4x4x4 led cube for my grandoughter she luvs it an took it to school to show her freinds thanks once again an keep safe
any hand crafting is interesting and joyful. Good for you and for your granddaughter have in you . Stay safe.
i have done everything as per your video,but when I run serial monitor the wifi connected part is not coming,just the dots are moving,can you suggest something??
Hi, it means WIFi is not connected yet. Make sure the SSId of your wifi is exactly as it is and upper case or lower case matters.
hi I really liked your project and am planning to implement this camera in arduino mega. Can you provide me the codes to implement it in arduino mega. and do you have shared all the information so that I can make this project by myself. waiting for your kind feedback.thanks
this doesn't need anything else. ESP32 is microcontroller like Arduino except it has WiFi and Bluetooth builtin. For Arduino mega, you need to get separate camera and WiFi module and it won't be easy and it would cost more. this cost less than Arduino Mega.
How can I fix this issue?
Sketch uses 2260 bytes (7%) of program storage space. Maximum is 32256 bytes.
Global variables use 222 bytes (10%) of dynamic memory, leaving 1826 bytes for local variables. Maximum is 2048 bytes.
it seems you have wrong settings before uploading the code. In the same menu where you select the board, I have mentioned to make other changes as well. follow those.
Would you mind to explain why You are choosing "AI-Thinker" in your code but "WRover" in your board?
The camera work with the settings. AiThinker is custom type of the board.
FYI - My board has Rx and Tx switched, it is 5V only and Writing on the board doesn't say AI-Thinker.
Good , but if you have 5 camera BT ,how can combined in one uno or bi
This device can handle only ONE. There is no enough memory to handle 5.
Great Video.
Im getting this error
"Failed to connect to ESP32: Timed out waiting for packet header
I cant figure this error out.
most of the times it is the voltage 5V for the device is not stable. Try different voltage source. or search my channel for the word "camera" to see other options.