Don't scrap the cab. I'm sure in future you will find another truck. Put rear section on it and make it live again. Be a great video of putting it back together
Good runner, I used to get to drive an old f600 hauling shingles to the dump every time we did a tear off it was the high light of the day. Cheers from Jacksonville Florida 🌞
First experience working in your neck of the woods was in HS, during a basketball tournament our van broke a belt while idling at the restaurant for breakfast as it was -70. Since I was the only one knowledgeable and any experience I got the joy of walking to Young’s Napa to get a belt and installing it on the school van.
I can always enjoy the way you give your walk around and show all the setup is needed that should be taken but it always work. Glad to see the old girl come alive after sitting so long. Please keep us with your next project.
ONE of the first jobs I did as a youngster was work on one of these trucks. It was a red dump truck that I also drove for about one summer. Loved it ! Yours has all the right stuff !!
Hey bud, I have 3 1970 c800 cab overs down here in Washington. You have some tilt cab only parts there that I could definitely use. We should talk. I enjoy all your videos! Cheers! Will.
* Austin I don't envy snow in mid October. It's 60° this week in Michigan. I feel so bad everytime I see that COE mutilated. Those are so cool ! I personally would have sooner seen you save that. Of course there was never any doubt the old Ford engine would run. Baring broken shit you can't kill an old Ford ! Cheers 🍻👊😎👍🍻
Yeah Brother, Thank you for this cool vid of the 'Can-Do Man' nailing it once again! We need you back more often to break up the monotony of TH-cam lately, Thanks again!!
I'm glad you found an engine for the F-600, but I'm equally bummed that the cabover had to die. Hopefully you can stumble across a good frame and cobble that nice cab onto it!
BYA, well you pulled off yet another true "COLD START"! Engine sounds solid! Thanks for yet another great video! Burr and it's not winter yet! Cheers from the South West high desert!
You should hang on to that C model cab. It is in pretty good shape. Usually there is a lot more rust in the cab step and lower cab. Keep your eyes open and you'll find a C model truck that's mechanically pretty sound but the cab is rotted out and it will be reasonably priced then you can make a good truck with your cab. Just my two cents worth from an admitted C Ford fan.
Was looking for a new vid from you, and wondering if you got snow yet. Both questions answered. For what it's worth, I lit one woodfire here in western pa
If you do want the full experience, take a rear half of another truck, who cares if its a dodge or international or a ford.... what ever it is and is hooked up to the transmission, that is just what it is now. If your like me, make your own bell housing, and put what ever transmission behind of the next engine... In other words, Use this engine for the F600 and then with the remaining parts of the cabover still in tact, put a engine in front of the cabover transmission. Just weld what ever you have hanging around for the rear axle and frame work. Your goofy uncle bob an you can drive the cabover and enjoy having something no one else has. If you were me, I would use a dually pickup rear half and make it a cab over pickup. Now if that doesn't fit in with a backyard mentality, nothing else will. Also, who says it has to be a dually rear, and so maybe a junky old half ton with a six foot box or a flatbed... thats for you to decide
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
The cab over is pretty cool and in good shape. You could sit that on something and make a neat rig out of it. Thanks for the video 🍺
Making a cool rollback out of it to haul projects would be mint.
Don't scrap the cab. I'm sure in future you will find another truck. Put rear section on it and make it live again. Be a great video of putting it back together
Good runner, I used to get to drive an old f600 hauling shingles to the dump every time we did a tear off it was the high light of the day. Cheers from Jacksonville Florida 🌞
That baby wanted to run right off the bat 👍👍🇺🇸
First experience working in your neck of the woods was in HS, during a basketball tournament our van broke a belt while idling at the restaurant for breakfast as it was -70. Since I was the only one knowledgeable and any experience I got the joy of walking to Young’s Napa to get a belt and installing it on the school van.
I can always enjoy the way you give your walk around and show all the setup is needed that should be taken but it always work. Glad to see the old girl come alive after sitting so long. Please keep us with your next project.
ONE of the first jobs I did as a youngster was work on one of these trucks. It was a red dump truck that I also drove for about one summer. Loved it ! Yours has all the right stuff !!
I Love watching you get these things running. Cant wait to see it in the F600 and driving down the road!
Thanks for another great video 😊
Dude we are running out of daylight do a recap of your Summer! Love the content as always.
good job and the V8 sounds great !
Old girl sounds great!
Hey bud, I have 3 1970 c800 cab overs down here in Washington. You have some tilt cab only parts there that I could definitely use. We should talk. I enjoy all your videos! Cheers! Will.
* Austin I don't envy snow in mid October. It's 60° this week in Michigan. I feel so bad everytime I see that COE mutilated. Those are so cool ! I personally would have sooner seen you save that. Of course there was never any doubt the old Ford engine would run. Baring broken shit you can't kill an old Ford ! Cheers 🍻👊😎👍🍻
It has been snowing here in Utah already this year also I think our first snow can in September
purrs like a kitten! Looking forward to more on the motor swap from the cabover to the F600. I hope the weather cooperates.
that f600 is gonna be a real nice truck for hauling and much much more
Cool thanks for your time 😮
Yeah Brother, Thank you for this cool vid of the 'Can-Do Man' nailing it once again! We need you back more often to break up the monotony of TH-cam lately, Thanks again!!
Great news!
Cab overs are punishment for us surly drivers :-)
Great stuff
sounds good
I'm glad you found an engine for the F-600, but I'm equally bummed that the cabover had to die. Hopefully you can stumble across a good frame and cobble that nice cab onto it!
Sounds like a good runner think you found yourself a gem cant wait to see you get it sorted excclent video as useuall keep grinding young fella
BYA, well you pulled off yet another true "COLD START"! Engine sounds solid! Thanks for yet another great video! Burr and it's not winter yet! Cheers from the South West high desert!
Another great video
You got the first snow☃️, here in France, it's still summer😂.
Hope to see more about the engine swap🤩.
👋from🥖🇫🇷
You should hang on to that C model cab. It is in pretty good shape. Usually there is a lot more rust in the cab step and lower cab. Keep your eyes open and you'll find a C model truck that's mechanically pretty sound but the cab is rotted out and it will be reasonably priced then you can make a good truck with your cab. Just my two cents worth from an admitted C Ford fan.
Sounds like a very healthy engine. The swap will be epic.
We used to have a Ford F-500 that was fitted with a 330 V8
The legend posts again
Great content reusing parts nice and simple
Wouldn't be a FE if it didn't have an exhaust leaks. But however it does run good
Looks like you got a good one! I love those Ford FE engines. I had a bunch of them over the years and they were always dependable.
Oh wow!! A FE/FI without a exhaust manifold leak!
Yeah that's unheard of...
Sounds good to go
Onward!
See what el-nina brings for weather for you, take care.
Ford to the fullest.
She's a gooden!
Enjoyed
Was looking for a new vid from you, and wondering if you got snow yet. Both questions answered. For what it's worth, I lit one woodfire here in western pa
what is it about an ancient engine that sounds so fantastic?
Another good episode from The Great White North. Thanks and Best Wishes.
So glad for you 🎉🎉❤❤😊
That was fun but I really wanted to see the oil pressure..
👍🍀. X cellent good luck
She’s a runner for sure. Is the Valatta still open? We left FAI back in 2013. That was one of our favorites to dine at.
Whoa. I must be up late.
👍
You still putting the nice single cab f600 72 flatbed back together with this 72 330ft motor sir
Yes that project is still planned but on the back burner for awhile.
If you do want the full experience, take a rear half of another truck, who cares if its a dodge or international or a ford.... what ever it is and is hooked up to the transmission, that is just what it is now. If your like me, make your own bell housing, and put what ever transmission behind of the next engine... In other words, Use this engine for the F600 and then with the remaining parts of the cabover still in tact, put a engine in front of the cabover transmission. Just weld what ever you have hanging around for the rear axle and frame work. Your goofy uncle bob an you can drive the cabover and enjoy having something no one else has. If you were me, I would use a dually pickup rear half and make it a cab over pickup. Now if that doesn't fit in with a backyard mentality, nothing else will. Also, who says it has to be a dually rear, and so maybe a junky old half ton with a six foot box or a flatbed... thats for you to decide
Sweet baby jesus
Holy shit you guys actually got snow up there already
any one know where to find parts for the ft 330 motor cant find them any where
Its a winner 👍 👍 👍 👍
retaining the rear of this truck would have been a deal breaker? and do you hgave aby idea what the seller was building with the rear of our truck?
She rumbles.
👍👍
🤠👍
You need to save that COE, for another truck that could use a good one and not scrap it,, just saying 😅
Third!
Holy crap I'm first!
Runnin' like a CHAM-PEE-ON! That'll make a fine swap for Big Blue.