What's the point of the first one? The second one, can save time, money, and materials and just buy a pin remover, or use a screwdriver as many have done before. Then even further on it, just buy a paint mixer. Third one, cool, you put a cross cut in a section of bolt to screw it into some soft wood... that does nothing but have a chunk of metal in the middle of a piece of soft wood. Fourth one, yay! You bolted some white to some soft wood so that you have some wire bolted to some soft wood to yank on. Here's a "hack," tie some string to the head of a broom so you have some string tied to the head of a broom to yank on. And on, and on, and on, and... use a plastic bottle on your indoor faucet to fill the bucket? Yeah, having a bottle with water inside left hanging on your faucet is much more practical than buying a faucet that has a nozzle on a hose, screwing a hose to your faucet if you don't have that but have a threaded faucet, or, you know, using an outdoor faucet, your shower head, or your bath faucet. 'Here, law nails on a board, burn the board, and you fixed the problem with your AC unit!' What is that "hack" even supposed to be used for? The nail through cardboard, for people that lack the mental capacity to hold a nail. Just just using an angle grinder to turn a wrench into a limited range cat paw for people too stupid to use the claws on their hammer or cat paw.
"How to ruin the wrong tool in order to do the job that right tool could've done properly." Although pre-cutting screw threads in a headless bolt isn't a bad idea, to be fair. Although I've only ever done that to REMOVE a bolt that had the head shorn off, not screw in a stud bolt.
The thing with the wrench. I would probably just use my hammer. It already has this thing on the other end for pulling out nails. Try it. It works even better than destroying a perfectly good wrench.
Yes, you can make do with the wrong fastener or tool, but it is always better to have the best tool for the job. I never regret getting the proper tool.
О, сколько нам открытий чудных готовит интернета дух... И Ютюба иже с ним... Не перестаю восхищаться полётом фантазии мастеров-фломастеров! Хотя, конечно, некоторые идеи очень даже ничего. Например, как на банку с краской напялить обрезанную бутылку.
@@Waldee84 Ive waited 7:40 and have so far seen ONE almost useful thing, not a single one of these are "clever" their are downright obvious or just stupid.
Пир новаторства и наставничества! Накрыть банку с краской пищевой плёнкой - вот мой фаворит на премию "Фейспалм" в номинации "Сантехник Афоня втирает молодым за культуру производства". :)))
Funny I just came into the comments to say that for once, for my own home shop, there were one or two that gave me some ideas… lol… none of them as-is, but a few good source ideas… 😂
I don't know. Cutting up plastic bottles to use them as cheap disposable funnels isn't that dumb if you need to funnel things like paint or glue that would effectively destroy the funnel (or be too much effort to clean off the funnel). Not sure how often you actually need to funnel such liquids, though.
Lol I bet all you guys, when you don't have the right tools you just stand around with your hands in your pockets, your useless without the proper tools lol
Now i know how to cut up all my snap on wrenches so i can pull nails....that damn hammer is just outdated!...and dad gummit i knew there was a better way than them extremely cheap and easy clothes pin!!....this stuff is hilarious!
Bravo vous êtes le roi du bricolage Peu de commentateurs ont compris et prétendent qu'il est plus simple d'aller acheter l'outils spécialisé , sauf si le magasin est à 30km ou si vous avez un accident sur la route . Mais de toutes façons il est impossible de posséder tous les outils du monde
Compris quoi? Le gars massacre plus d'outils et de matériel en une seule vidéo qu'un stagiaire qui n'a jamais touché un outil de sa vie. C'est juste une blague. Il n'y fondamentalement aucune idée réellement utile ici. Et la théorie du "posséder tous les outils" n'a aucun sens: il utilise littéralement plus d'outils pour en créer d'autres qui ne sont pas plus utiles que les outils de base qu'il a déjà.
1:46 linijka skala half długości 1 half to 1,2 cm 2 halfy to 2,4 cm 3 halfy to 3,6 cm 4 halfy to 4,8 cm 5 halfów to 6 cm 6 halfów to 7,2 cm 7 halfów to 8,4 cm. 8 halfów to 9,6 cm 9 halwów to 10,8 cm 10 haleów to 12 cm 11 halfów to 13,2 cm 12 halfów to 14,4 cm 13 halfów to 15,6 cm. 14 halfów to 16,8 cm. 15 halfów to 18 cm. 16 halfów to 19,2 cm 17 halfów to 20,4 cm 18 halfów to 21,6 cm 19 halfów to 22,8cm. 20 halfów to 24 cm. 30 halfów to 36 cm. 5:22 i 11:49 linijka : 1cm, 2 cm, 3 cm, 4 cm, 5 cm, 6 cm, 7 cm, 8 cm, 9 cm, 10cm, 11 cm, 12 cm, 13 cm, 14 cm 15 cm, 16 cm, 17 cm, 18 cm , 19 cm i 20 cm, 21 cm, 22 cm, 23 cm, 24 cm, 25 cm, 26 cm 27 cm, 28 cm ,29 cm i 30 cm 1 cm to 10 mm
there are more than a few of these that are down right clever. Then there are some that.... The tools used to make the "Handyman Invention" cost more than the invention itself, and if you have the tool to make it, you should already have at least 2 of the tool you're trying to replace. (or in the case of the wire strippers, a knife already in your pocket)
There are few that that known, like drilling wooden plank with plank underneath, but rest of "inventions" is downright awful. Why do anyone would need to attach box cutter to a plank if you can use it right away without any issues.
Some of these are really neat. Some of these are ridiculous. And it seems like, as the video went on, the neat ones stayed the same level of neat, while the ridiculous ones got more ridiculous. I'd be concerned, but I'm pretty sure it was on purpose.
In all those videos I keep asking myself: what if I don't have an angle grinder? And in many of those, the angle grinder you need probably costs more than the correct tool you should be using instead of those hacks.
@@michaelunderwood5138 You mean more affordable options that are made to directly address a problem? These things require you to use tools to alter tools to change their given purpose...why?
A true handy man will have the correct tools to make the job easierand faster. Creativity is a staple in a hanymans arsenal. No matter what he will build or get what he needs if he doesn't have it. In a pinch you should never modify how a tool is designed to work it could cause damage to the job or could cause injury to persons or operator.
С паяльником вообще пиз...ц, таким успехом можно в туалете прибить палку, намотать на нее бумагу, и вытирать жопу не пачкая руки) а сделав это устройство на колесе от велосипеда, можно сделать на несколько использований
A nice range of "that's useful", to "maybe in a pinch", to "why on earth?". Mostly the last.
What's the point of the first one?
The second one, can save time, money, and materials and just buy a pin remover, or use a screwdriver as many have done before. Then even further on it, just buy a paint mixer.
Third one, cool, you put a cross cut in a section of bolt to screw it into some soft wood... that does nothing but have a chunk of metal in the middle of a piece of soft wood.
Fourth one, yay! You bolted some white to some soft wood so that you have some wire bolted to some soft wood to yank on. Here's a "hack," tie some string to the head of a broom so you have some string tied to the head of a broom to yank on.
And on, and on, and on, and... use a plastic bottle on your indoor faucet to fill the bucket? Yeah, having a bottle with water inside left hanging on your faucet is much more practical than buying a faucet that has a nozzle on a hose, screwing a hose to your faucet if you don't have that but have a threaded faucet, or, you know, using an outdoor faucet, your shower head, or your bath faucet.
'Here, law nails on a board, burn the board, and you fixed the problem with your AC unit!' What is that "hack" even supposed to be used for?
The nail through cardboard, for people that lack the mental capacity to hold a nail. Just just using an angle grinder to turn a wrench into a limited range cat paw for people too stupid to use the claws on their hammer or cat paw.
cám ơn bạn đã chia sẻ nhé🥰🥰🥰
Мне особенно понравился гаечный ключ 6:20 🤣
funk FPV needs to review these
It's amazing to see how simple tools can turn into clever solutions for common problems.
🙄😳 jamás entenderé ese afán de algunos hombres de echar a perder algo útil para arreglar otra cosa
You’re doing great! You’ve done a great job!
У меня мозг поплыл! ((( 3:45 конечно!!! Мы ж прищепку на кисточку прикрутили! Хотя могли и жестянку, но это не про "гения" автора😂
Great video
2:02 I could have used this one like a week ago!!! OMG!!! THX!!! 🤣
Some very clever ideas, some more trouble than buying a ready made product.
Not some, nearly all of them!
Video rất tuyệt vời .👏
Fantastico sabre como hacer cosas, gracias, mis respeto.🇦🇷💖
Теперь я знаю, как выглядит творческий пОнОс...
0ⁿ
Booo
Ok
Забивать гвоздь держа картоном норм. Пальцы целые
Muchas felicidades te deseamos desde Sta Clara los que te queremos mucho y los demás
🎉 João Virgínio Natal RN obg nota tá z10
If I saw somebody on my crew trying to use half these tricks, I would fire them. Most of these are pointless.
Вероятно Ваша команда делает работу для которой эти трюки бессмысленны. Другой команде для работы эти трюки подойдут.
"How to ruin the wrong tool in order to do the job that right tool could've done properly."
Although pre-cutting screw threads in a headless bolt isn't a bad idea, to be fair. Although I've only ever done that to REMOVE a bolt that had the head shorn off, not screw in a stud bolt.
Ролик наводит на мысль - как часто выбор человеческий, балансирует между мудростью и запредельной глупостью.
Он просто совсем почти не конченый
Hay if it's stupid and it works was it ever really stupid?
@@demonlordotrt754 эй, если ты умеешь писать и читать - это не говорит о том, что ты умный.
ИМХО
@@demonlordotrt754 тогда заточки сверло с помощью идеи в данном видео.Надеюсь, останешься цел.А если нет, тоже неплохо)))
Вот не понял ваще, зачем болт без шляпы было в бревно тасовать, и и на деревяке гвозди палить,
Гвозди на деревяшке, типо узор. Про болт тоже не догнал
The coolest thing for me is the foam bottle 👍👍
Thx
والله اعجبني كثيراحسنت
Nice sharingnya🙏🙏 yuk ☕☕👉👉
The thing with the wrench. I would probably just use my hammer. It already has this thing on the other end for pulling out nails. Try it. It works even better than destroying a perfectly good wrench.
Amazing video
it can be tried 👍👍👍
Good❤
@ 08:50 What a COLOSSAL waste of printer ink!!
Great stuff , but recommend turning off sound
This is amazing😮
Прищепка просто супер! Долго думал над этой конструкцией гений?
Ибо нех
Автодрочилка ему нужна
Frumos.👍💖
It’s great and very useful
Ещё один ломатель хорошего инструмента 😬
Не показывайте Доктору
К доктору его!
.
8:29 вот реально годная вешь👍👍
Yes, you can make do with the wrong fastener or tool, but it is always better to have the best tool for the job. I never regret getting the proper tool.
Nice, salam Indonesia🙏
О, сколько нам открытий чудных готовит интернета дух...
И Ютюба иже с ним...
Не перестаю восхищаться полётом фантазии мастеров-фломастеров!
Хотя, конечно, некоторые идеи очень даже ничего.
Например, как на банку с краской напялить обрезанную бутылку.
I survived almost 3 minutes watching this. And now you owe me 5 minutes of my life back.
I've waited 5:30 hoping for one reasonable/useful thing but I gave up.
@@Waldee84 Ive waited 7:40 and have so far seen ONE almost useful thing, not a single one of these are "clever" their are downright obvious or just stupid.
even after 4mins, just bad or dumb ideas, or common things any idiot could think of
I see the "God's gifts" to everything are here.
Terima kasih, semakin menambah wawasan👍👍👍
Есть хорошие идеи, но большинство абсолютно бесполезных идей
Это не идеи это смекалка. Когда нужно что-то сделать, но нечем, а времени ехать в магазин нет.
Сам так часто работаю.
Homeowner ideas in a pinch..
Mantap nih 👍👍
I just ❤ ingenuity! 👏🏼😎
Lucky you. Make shift tools are strictly verboten in the shops where I’ve worked.
Its cool but its not practical since buying the tools from a hardware store is much better.
Very nice good video, ❤️💕❤️🥀
これ作ってる間に発生する給料で専用のツール買えますよ😊仕事中にこんなの作ってたら遊んでると思われる🎉
Пир новаторства и наставничества! Накрыть банку с краской пищевой плёнкой - вот мой фаворит на премию "Фейспалм" в номинации "Сантехник Афоня втирает молодым за культуру производства".
:)))
тоже мне фехтовальщик нaшёлcя
Boa ideia 👏👍
As a professional handyman with a successful handyman business, it is safe to say that I would use zero of these tips.
Exactly. I'm not handyman but I agree.
Funny I just came into the comments to say that for once, for my own home shop, there were one or two that gave me some ideas… lol… none of them as-is, but a few good source ideas… 😂
As an amateur handyman. I have to completely agree.
I don't know. Cutting up plastic bottles to use them as cheap disposable funnels isn't that dumb if you need to funnel things like paint or glue that would effectively destroy the funnel (or be too much effort to clean off the funnel). Not sure how often you actually need to funnel such liquids, though.
Lol I bet all you guys, when you don't have the right tools you just stand around with your hands in your pockets, your useless without the proper tools lol
Kreatif banget😊
Parabéns pessoal, pela criatividade!!!
HOW BLOODY MARVELOUS IS THAT?!?!?!?!
BRAVO!!
Ok SOME of these are actually pretty smart
Очень много полезного, для облегчения жизни! Спасибо!👍
Очень много опасного для жизни, а чтоине опасно, то бесполезно.
@@lopi44 в жизни много чего опасного!
Самодельщики соревнуются ,кто придумает идею поупоротей.
Молодцы ребята.
Да да да!!! Типо рекламы Инстаграм .негритянки с зубами как у коней и протэзом со стращами. Как это все паяет.....,,?;!!!
Terrific video! Thanks for sharing something so useful! 🙏👍
*so useless.
Безумец в мастерской !
Genial
Muy chulo
Gracias
That trick with the concrete also works with my wife's vibrator
Amazing work ❣️
Have a great day 😊
V nice job
Ну кое что стоит внимания😉
Hola buenas noches cómo está, me gustó el vídeo, saludos DESDE PERÚ un abrazo.
Merci beaucoup pour la vidéo
Using a disc grinder as a pencil sharpener wtf. This was interesting but it’s way safer and cheaper to just get the tools you need.
Awesome Mr Fix-it ;)
I hate seeing someone turn a twenty dollar tool into a five dollar tool.
Да ты прям гений, ёпти😂😂😂
Este vídeo é muito bom
походу это родственник мистера ссани🤣
По ходу ты прав.Как минимум брат по разуму, которого, по всей видимости нет.
Very good
Now i know how to cut up all my snap on wrenches so i can pull nails....that damn hammer is just outdated!...and dad gummit i knew there was a better way than them extremely cheap and easy clothes pin!!....this stuff is hilarious!
Bravo vous êtes le roi du bricolage
Peu de commentateurs ont compris et prétendent qu'il est plus simple d'aller acheter l'outils spécialisé , sauf si le magasin est à 30km ou si vous avez un accident sur la route . Mais de toutes façons il est impossible de posséder tous les outils du monde
Compris quoi? Le gars massacre plus d'outils et de matériel en une seule vidéo qu'un stagiaire qui n'a jamais touché un outil de sa vie. C'est juste une blague. Il n'y fondamentalement aucune idée réellement utile ici. Et la théorie du "posséder tous les outils" n'a aucun sens: il utilise littéralement plus d'outils pour en créer d'autres qui ne sont pas plus utiles que les outils de base qu'il a déjà.
Порезать гаечный ключь для тогл что бы доставать гвозди 🤓
Глядя на это с ужасом понимаешь как деградирует человечество. 🤦♂️ Радует то, что не все настолько дятлы.
1:46 linijka skala half długości
1 half to 1,2 cm
2 halfy to 2,4 cm
3 halfy to 3,6 cm
4 halfy to 4,8 cm
5 halfów to 6 cm
6 halfów to 7,2 cm
7 halfów to 8,4 cm.
8 halfów to 9,6 cm
9 halwów to 10,8 cm
10 haleów to 12 cm
11 halfów to 13,2 cm
12 halfów to 14,4 cm
13 halfów to 15,6 cm.
14 halfów to 16,8 cm.
15 halfów to 18 cm.
16 halfów to 19,2 cm
17 halfów to 20,4 cm
18 halfów to 21,6 cm
19 halfów to 22,8cm.
20 halfów to 24 cm.
30 halfów to 36 cm.
5:22 i 11:49 linijka : 1cm, 2 cm, 3 cm, 4 cm, 5 cm, 6 cm, 7 cm, 8 cm, 9 cm, 10cm, 11 cm, 12 cm, 13 cm, 14 cm 15 cm, 16 cm, 17 cm, 18 cm , 19 cm i 20 cm, 21 cm, 22 cm, 23 cm, 24 cm, 25 cm, 26 cm 27 cm, 28 cm ,29 cm i 30 cm
1 cm to 10 mm
tak
2 useful tips
there are more than a few of these that are down right clever. Then there are some that.... The tools used to make the "Handyman Invention" cost more than the invention itself, and if you have the tool to make it, you should already have at least 2 of the tool you're trying to replace. (or in the case of the wire strippers, a knife already in your pocket)
There are few that that known, like drilling wooden plank with plank underneath, but rest of "inventions" is downright awful. Why do anyone would need to attach box cutter to a plank if you can use it right away without any issues.
Every one of these is the harder, stupider, more expensive way to get the job done👍
You are too.
I like 👍
Do you know that there are ready made bits of steel with threads and screwdriver slots?
I think they call them screws.
ПРОСТА КЛАСС🤝👍
Some of these are really neat. Some of these are ridiculous. And it seems like, as the video went on, the neat ones stayed the same level of neat, while the ridiculous ones got more ridiculous. I'd be concerned, but I'm pretty sure it was on purpose.
good idea
У меня создалось впечатления, что идеи тебе приходят быстрее, чем ты их успеваешь снять на камеру, даже если они бесполезные.
Hay đỉnh vãi
Da ist schöner Fusch dabei! :D
Cose meravigliose brillante idee favolose bravissimo
7:55 i dont have trust in that soddering, the sodder is on top of the wires.
Mayby it need more flux
My take away from this video is:
You don't always have to hammer the nail into a board. You can also hammer the board onto a nail!
إنت حقا ذكي ومبدع
Совсем неудивительно, что у этих людей не хватает ума на поход в магазин))
Но, при всём этом, такие каналы имеют почти по миллиону подписчиков:))) С этим миром явно что то не то...
@@TieraRoot Welcome to the age of ignorance. We're little more than 5,000 years in, a little less than 427,000 to go.
They’ve never had to improvise and adapt. They’ve always had everything handed to them on a silver platter.
In all those videos I keep asking myself: what if I don't have an angle grinder? And in many of those, the angle grinder you need probably costs more than the correct tool you should be using instead of those hacks.
Creativity is the staple of a true handymans skills. Certainly i could assume that there are affordable options available.
@@michaelunderwood5138 You mean more affordable options that are made to directly address a problem? These things require you to use tools to alter tools to change their given purpose...why?
A true handy man will have the correct tools to make the job easierand faster. Creativity is a staple in a hanymans arsenal. No matter what he will build or get what he needs if he doesn't have it. In a pinch you should never modify how a tool is designed to work it could cause damage to the job or could cause injury to persons or operator.
For everything I've seen in this video a patented tool or part already exists
@@dosatkeysbeats And those probably cost less than the angle grinder you need to to all of these hacks.
GENIAIS SHOW PARABÉNS
Congratulations 🎊
O tipo de vídeo que gosto, parabéns
CARO RIHARDTO SILVA SI INTENDEVA YOU CHE MAPERO CONTATTA LINSERCIENTE E PAGALO ?????????????????????????????????????????????????????'
No hablas tu idioma
Best idea sir thank u
So satisfying 😍
Шикарная подборка.
С паяльником вообще пиз...ц, таким успехом можно в туалете прибить палку, намотать на нее бумагу, и вытирать жопу не пачкая руки) а сделав это устройство на колесе от велосипеда, можно сделать на несколько использований
снимите ролик