I useing same machine but I have one problem. I use 3x1 and 3x0.5 tube size When I finish welding joint the ho gets blocked. But why. Plz give me reply.
Hello Wesley,Thank you for your interest. Please contact your local sales and service center and they will be able to answer all your product and service questions. www.swagelok.com/en/locate-a-sales-service-center
I using same machine M200 now in Singapore. I welding tube size is OD 3/8x 0.083 wall thick 625 inconal and 316L. But this 2 tubes size don’t have program this machine. I using purging gas is argon. Can you reply me how to make the program in this machine
Hi Reji, Your local sales and service center will be able to answer your question. You can find their contact information here: swagelok.com/en/locate-a-sales-service-center
In Swagelok, there are ''Tube Butt Weld Fitting"(plaine end, square face) and ''Automatic Tube Butt Weld Fitting''(end with Integral filler ring), refer to Weld Fittings-MS-1-149. The difference of two kinds of tube ends is introduced in the document. However, there is no information about what is the advantage and disadvantage of the two and how the welding of each kind of end is performed. As shown in this video, the tube end is plane end, i guess welding of Automatic Tube Butt Weld Fitting can't be handled by this machine. Could you please talk about what I mentioned above? Thanks.
Swagelok бесшовные трубки толщиной 1мм годами( 25 лет при мне 300 bar держат кислая среда H2S), боятся только ленивых сварщиков (которые не переставляют "землю" ближе к месту работы , ток не дурак идёт по нержавейке).
![How to Use a Bench Top Tube Bender | Tech Tips | Swagelok [2020]](http://i.ytimg.com/vi/ZapZyRse6gQ/mqdefault.jpg)
Dear sir/medam when iam using with this machine there is a problem that shield gas pressure is flectuating when i turn on sheduld gas
I useing same machine but I have one problem. I use 3x1 and 3x0.5 tube size When I finish welding joint the ho gets blocked.
But why.
Plz give me reply.
Please make vedio with 1/8 inch tube to tube welding
How much would a complete set cost to be able to do from 3/4 to 2 inch tubing?
Hello Wesley,Thank you for your interest. Please contact your local sales and service center and they will be able to answer all your product and service questions. www.swagelok.com/en/locate-a-sales-service-center
I would recomend you to send a quotation to your local Swagelok distributor if you still want to know how much it costs.
I using same machine M200 now in Singapore. I welding tube size is OD 3/8x 0.083 wall thick 625 inconal and 316L. But this 2 tubes size don’t have program this machine. I using purging gas is argon. Can you reply me how to make the program in this machine
Hi Reji,
Your local sales and service center will be able to answer your question. You can find their contact information here: swagelok.com/en/locate-a-sales-service-center
how muchs
In Swagelok, there are ''Tube Butt Weld Fitting"(plaine end, square face) and ''Automatic Tube Butt Weld Fitting''(end with Integral filler ring), refer to Weld Fittings-MS-1-149. The difference of two kinds of tube ends is introduced in the document. However, there is no information about what is the advantage and disadvantage of the two and how the welding of each kind of end is performed. As shown in this video, the tube end is plane end, i guess welding of Automatic Tube Butt Weld Fitting can't be handled by this machine. Could you please talk about what I mentioned above? Thanks.
Swagelok бесшовные трубки толщиной 1мм годами( 25 лет при мне 300 bar держат кислая среда H2S), боятся только ленивых сварщиков (которые не переставляют "землю" ближе к месту работы , ток не дурак идёт по нержавейке).