How To Remove Rust From Chassis

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 103

  • @cluelessblamer518
    @cluelessblamer518 4 ปีที่แล้ว +23

    A rusted frame brought back to life will make any grown man shed tears of joy.

  • @merrittmcdowell8675
    @merrittmcdowell8675 3 ปีที่แล้ว +30

    Never use rubberized it will eventually trap water once penitrated by a rock or something else

  • @erickpacheco6802
    @erickpacheco6802 9 หลายเดือนก่อน +1

    Does it say not to use rubber? So what would be the ideal materials for this job! I need it urgently thank you God bless you

  • @ncautolink
    @ncautolink 5 หลายเดือนก่อน +1

    Hey buddy! Found your video how to remove rust! Been following yours and all the guys motorcycle videos. I was surprised to find this one from you! I’m building a Ram 2500 and moving to Michigan from North Carolina. Trying to prep the truck and protect it from future rust. Got the Florida truck with zero rust, just wanted to clean minor surface rust of the wheel Huns because I just got new rims and 37” tires and did not want to install center caps. Thanks.

  • @sonnybustos1723
    @sonnybustos1723 4 ปีที่แล้ว +8

    Just a quick fyi. Double check your jack stands I think they're recalled by harbor freight for failure. Great video thanks

    • @HOLYSHIFT
      @HOLYSHIFT  4 ปีที่แล้ว +1

      Sonny Bustos thanks man - will check at HF

  • @nathanyamaha465
    @nathanyamaha465 4 ปีที่แล้ว +4

    How did it hold up?

  • @MichaelAllen-td1uu
    @MichaelAllen-td1uu 4 ปีที่แล้ว +16

    Your Pittsburgh jacks have been recalled

  • @hanzo52
    @hanzo52 8 หลายเดือนก่อน +3

    Would be nice with an update, how does it look like now?

  • @emelianenkov
    @emelianenkov 4 ปีที่แล้ว +18

    Possibly the most dangerous way to lift a truck up. Use the frame to lift it. The jack will slip off that control arm super easily.

    • @msk3905
      @msk3905 3 ปีที่แล้ว +1

      I was thinking the same thing very sketchy

  • @zaddy88
    @zaddy88 5 ปีที่แล้ว +9

    I have a fj as well.. frame rust is a problem on these..

    • @jjack6896
      @jjack6896 5 ปีที่แล้ว +1

      facebook.com/groups/632711680558455/

  • @4runner4ever83
    @4runner4ever83 ปีที่แล้ว +1

    I have a 3 year old 4runner. There are surface rust on some of the welds. I treated it with rust converter a few times. Did not paint over it. I will see next spring if there are new rust.

    • @solace4114
      @solace4114 ปีที่แล้ว

      Let me kmow

    • @Matt-ji2sy
      @Matt-ji2sy 6 หลายเดือนก่อน

      How does your 4Runner frame look, one year later?

    • @mortillan2196
      @mortillan2196 5 หลายเดือนก่อน

      How is your DIY holding up? Still no sign of rust?

  • @limitlessworx5724
    @limitlessworx5724 2 ปีที่แล้ว +2

    Nice video, but fyi from my experience rubberized undercoating seems to hold moisture so I stopped using found fluid film is nice protection

  • @vinylgroovin747
    @vinylgroovin747 3 ปีที่แล้ว +2

    I did this to my 2002 4runner slowly over the course of the summer. I "painted" the whole frame with RP342 Black (cosmoline). I recommend you also spray the inside of the frame with fluid film to prevent rust that may form undetected until it's too late.

    • @supermansuperman9066
      @supermansuperman9066 ปีที่แล้ว

      ------------------------- Quick-Glo isn't available . It's a mystery. -Quick Glo has disappeared. No one can contact the owner's that made a famous ad with Jay Leno. Inventories have disappeared in the U.S. ,U.K. and Australia. Does anyone know for sure what is happening? I ordered a large supply months ago from their Website which is still running. I rec'd nothing not even an email confirming my order. Quick-glo is the best for chrome and rust and as a preventative. If you know what has happened; please please report on your findings.

    • @pennyp647
      @pennyp647 ปีที่แล้ว

      Do you have any suggestions for a product for the fluid film?

    • @lonid7316
      @lonid7316 7 หลายเดือนก่อน

      Hey, that's exactly what im planning on doing..Did you put RP342 Black over the rust converted layer, or did you put something in between

  • @MadMaxMFP-dc6kw
    @MadMaxMFP-dc6kw 4 ปีที่แล้ว +6

    Just get some amsoil HD MP two coats no problem all protected and can go on all your metal

  • @HyperionTwo
    @HyperionTwo 8 หลายเดือนก่อน +2

    Broke my heart to see you spray it with a rubberized coating after all that hard work. Thats going to trap moisture and make it 5x worse.

    • @lonid7316
      @lonid7316 7 หลายเดือนก่อน

      Hi, planning on doing every step up to the rust converter.... I eventually want to finish with COSMOLINE RP-342, should i put something in between that and the rust converter?

    • @twelve_string
      @twelve_string 5 หลายเดือนก่อน

      @@lonid7316 RP-342 or woolwax are the best alternative. Nice black finish

  • @fanningconstruction2050
    @fanningconstruction2050 5 ปีที่แล้ว +45

    Great job except for the rubberized stuff... it doesnt breath. Please don't use that stuff. Will rust from the inside out.

    • @anavan7
      @anavan7 5 ปีที่แล้ว +4

      i agree! The cleaning process and rust converter was great until i noticed the rubberized spray. That is a death sentence for any undercarriage.

    • @andyc609
      @andyc609 4 ปีที่แล้ว +1

      @@anavan7 so instead of spray is it best to leave after the rust converter ?

    • @anavan7
      @anavan7 4 ปีที่แล้ว +2

      Andy C for “preventative” rust treatment yes. There’s the optional black gloss paint for final chassis coverage but only if you prep the prior stages very well. Look up Corroseal Water-Based Rust Converter Metal Primer.

    • @freeaudiobooks7469
      @freeaudiobooks7469 4 ปีที่แล้ว +2

      @@andyc609 spray it with grease

    • @jonathanritter7364
      @jonathanritter7364 3 ปีที่แล้ว

      @@anavan7 what would you recommend? Most undercarriage sprays I'm seeing are all rubberized. You saying rustoleum and the other companies aren't good products? I gotta do this with my truck. Climbed under it yesterday and was pretty disappointed

  • @jjack6896
    @jjack6896 5 ปีที่แล้ว +7

    The rust reformer is a very good step. You might want to reconsider using the rubberized undercoating it really doesn't work well and can actually speed up the rust. Another area you need to be concentrate on is inside the frame. The FJC rots from the inside out in many places.

    • @HOLYSHIFT
      @HOLYSHIFT  5 ปีที่แล้ว +4

      J Jack Next step for me will be to insert spray oil/ grease into the frame through holes spread around the chassis

    • @jjack6896
      @jjack6896 5 ปีที่แล้ว +1

      I AM SANDY my suggestion would be to use fluid film. You can get it reasonably through a discount auto parts store. You’re best to order the 360% spray can wand kit with a few cans through Amazon.

    • @jjack6896
      @jjack6896 5 ปีที่แล้ว +2

      I AM SANDY be sure to join FJ Cruisers Rusted Frame Owners Unite for more help.

  • @pinoy413
    @pinoy413 4 ปีที่แล้ว +6

    I'm planning on doing my lexus gx460 soon and had similar rust if not almost the same. Any chance you would do an update video for us? Would love to see it. Thanks!

    • @Jagggggg88
      @Jagggggg88 3 ปีที่แล้ว

      Have you threatened your chassis? Got a prado 150 and it also has rusty welds from shortly ater dilivery 😢

  • @trom0679
    @trom0679 5 ปีที่แล้ว +6

    Good job, can't believe a Morden vehicle needs this kind of work👌

    • @HOLYSHIFT
      @HOLYSHIFT  5 ปีที่แล้ว +1

      Yeah, this truck is from NJ - all winters with the salt helping to form the rust and corrosion

  • @kizito8888
    @kizito8888 2 ปีที่แล้ว +3

    Get a grinder and attach a 5/8 wire brush. It gets all the rust off effortlessly. You will need full-body protection from the wires flying around.

    • @judejude520
      @judejude520 ปีที่แล้ว +2

      Yup, so far, I find grinder a d wire brush are the best combo.

    • @solace4114
      @solace4114 ปีที่แล้ว

      What to do once grinded all rust off .. regular black paint ? Krown? Fluid film?

    • @kizito8888
      @kizito8888 ปีที่แล้ว

      @@solace4114 POR 15 rust prep, then use POR-15 Rust Preventive Paint with a brush. Just make sure the paint doesn’t touch you skin because it will stay on for weeks.

  • @kyledfx
    @kyledfx 5 ปีที่แล้ว +7

    a cheap needle scaler is waaay faster and does a better job, rust converters have acid and thick coatings do promote rust by trapping moisture and rust converter acid. get metal to clean brown [no scale] at least then coat with cold galvanising compound, lots of it, multiple wet thick coats. it creates an electro chemical condition where the zinc primer corrodes off, not the steel. plus it doesn't flake off or trap moisture so when you start to see brown through the primer simply recoat. easiest way ive found to protect undercarriage here in maine

    • @frnciscob1
      @frnciscob1 4 ปีที่แล้ว +5

      nice. got any links to the product you use? thanks

    • @tripleseven8361
      @tripleseven8361 2 ปีที่แล้ว +1

      I’d be interested in hearing about that product too…

  • @darylhill9400
    @darylhill9400 2 ปีที่แล้ว +1

    A welders hammer is the tool to use I have chipped away at many frames and other rusty steels

  • @ciprianpeica85
    @ciprianpeica85 4 ปีที่แล้ว +3

    Can we get an update after 1 year plz

  • @fernandosanfranciscoca9278
    @fernandosanfranciscoca9278 4 ปีที่แล้ว +1

    Can you spray that coroseal ?

    • @HOLYSHIFT
      @HOLYSHIFT  4 ปีที่แล้ว +1

      Fernando Monterey California - I don’t know if they sell that option - and besides it’s a bit think ... so not sure how it would work with a spray gun....

    • @parajeeper
      @parajeeper 4 ปีที่แล้ว

      It’s watery like milk. I was just planning on a test spray with a harbor freight $10 gun

    • @michaelgray4601
      @michaelgray4601 ปีที่แล้ว +1

      I was wondering that myself. I wonder if you can thin it out a bit with more base chemical. Can't remember what he said it was.

  • @Luminex16
    @Luminex16 10 หลายเดือนก่อน

    What’ll happen if you just use the rust converter and no undercoating

  • @blueben1224
    @blueben1224 3 ปีที่แล้ว +9

    Rust: I shall come back

  • @MrMamairaja
    @MrMamairaja 4 ปีที่แล้ว +1

    This is a super grate video. Thanks so much Sandy

  • @msheehandub
    @msheehandub 4 ปีที่แล้ว

    Nice vid! What about fluid film? Would you put it on after the undercoating for extra protection?

    • @HOLYSHIFT
      @HOLYSHIFT  4 ปีที่แล้ว +3

      M S yeah I guess that can be done - but it’s like overprotective- like wearing 2 condoms 👍🏻 😆 LOL 👍🏻

  • @48Ballen
    @48Ballen 3 ปีที่แล้ว +3

    Lots of great work but..... The rust on these vehicles is inside the frame and unless you provide more drain holes and use an oil based product, the rust will continue and the frame will rot. Second, the use of a rubberized undercoat is a really bad idea because the moisture will get under it, be locked in and really rot the frame. I'm guessing by now the frame needs massive metal work.

  • @Will_JJHP
    @Will_JJHP 2 ปีที่แล้ว +1

    Good stuff... I found Corroseal to just be okay. The protective layer it creates isn't too durable. Avoid using rubber undercoating. It can trap moisture and cause even worse rust. The best option I found is Eastwood's rubberized rust encapsulator. Best of both worlds and easy to apply 💪🏼

  • @cbones345
    @cbones345 5 ปีที่แล้ว +4

    THIS IS SO COOL

  • @pawpawbandit3871
    @pawpawbandit3871 ปีที่แล้ว

    thanks, good video; lots of comments, not that many good videos

  • @joyridaz
    @joyridaz 4 ปีที่แล้ว +1

    Looks awesome!

  • @msk3905
    @msk3905 3 ปีที่แล้ว +1

    Corrolseal followed by Por 15 is my method

  • @ajsansone6825
    @ajsansone6825 4 ปีที่แล้ว +2

    Great video. Even more entertaining...is reading all of the expert opinions listed here. Lol

    • @privatedata665
      @privatedata665 3 ปีที่แล้ว +1

      Many of the "opinions" are damn good advice

  • @fernandosanfranciscoca9278
    @fernandosanfranciscoca9278 4 ปีที่แล้ว +8

    I would probably wear gloves and mask? Rust can be cured but you only have 2 eyes and lungs.
    Good vids though 👍

    • @HOLYSHIFT
      @HOLYSHIFT  4 ปีที่แล้ว +3

      Fernando Monterey California yeah - you’re right. A bit too excited to film that video... should’ve worn glasses at least !

  • @leongabrielvladescu410
    @leongabrielvladescu410 8 หลายเดือนก่อน

    Thank you a lot

  • @athletikonaol
    @athletikonaol ปีที่แล้ว

    There is a rustoleum product that did very well in a test on Project Farm. It's a Rust Reformer and Paint all in one. I think you can get it in colors, so I can do the silver body colored areas, or grey components with a grey color and frame with black.

  • @None-yb5ts
    @None-yb5ts 5 ปีที่แล้ว +3

    i'm about to do this do my entire frame...

  • @AllanO808
    @AllanO808 2 ปีที่แล้ว

    Glad those axle stands didn't take you out, drop them in the trash ASAP.

  • @jackt6112
    @jackt6112 ปีที่แล้ว

    Get a needle scaler from Harbor Freight.

    • @HOLYSHIFT
      @HOLYSHIFT  ปีที่แล้ว

      Please subscribe

  • @BiNumLi
    @BiNumLi 3 หลายเดือนก่อน

    Why not use vinegar straight for the rust converter? After that I would spray a lanolin based oil undercoat. No need to prime or paint. Lanolin is sheep fat. Not harmful to the environment. Save your money on buying Corroseal.

  • @joek2488
    @joek2488 5 ปีที่แล้ว +1

    Only 3 OSHA violations. nice!

  • @davidrose2382
    @davidrose2382 2 ปีที่แล้ว

    Next time just sand blast mate,no succh thing as rust converrter its just going to come back

  • @rupertsmith6097
    @rupertsmith6097 ปีที่แล้ว

    Use the rust converter but do not paint it. Better to apply lanoguard or other lanolin based protection instead. Paint will just trap moisture and end up worse.

    • @HOLYSHIFT
      @HOLYSHIFT  ปีที่แล้ว

      Please subscribe

  • @jorgeeortiz3132
    @jorgeeortiz3132 4 ปีที่แล้ว +1

    👍

  • @rickichase3438
    @rickichase3438 2 ปีที่แล้ว +1

    Rubberized coatings will rust out your body....

  • @grahamatkinson9395
    @grahamatkinson9395 2 ปีที่แล้ว

    Hi good video in the UK we use a product called lanoguard made from sheep wool check the videos out

  • @ackack612
    @ackack612 4 ปีที่แล้ว +2

    .....an Addams Family castoff.....??

  • @GuppyEgg
    @GuppyEgg 4 ปีที่แล้ว

    Good stuff

  • @privatedata665
    @privatedata665 3 ปีที่แล้ว

    Fluid film , I put that shit on everything .

  • @binagarten4667
    @binagarten4667 2 หลายเดือนก่อน

    Is anyone else just watching because of the girl on the bike?

  • @benjaminmeza5372
    @benjaminmeza5372 ปีที่แล้ว

    That chemical might have sealed the rust but it will continue to corrode the metal.

    • @HOLYSHIFT
      @HOLYSHIFT  ปีที่แล้ว

      Please subscribe

  • @frankl643
    @frankl643 2 ปีที่แล้ว

    You don't even use a mask and rubber gloves?

  • @zee_nyc
    @zee_nyc 3 หลายเดือนก่อน

    You did half the work, just for a TH-cam video. Sheesh
    Once you called the front skid plate a mud guard, it was over.

  • @sshyshy6097
    @sshyshy6097 2 ปีที่แล้ว

    Do yourself a favor throw away that bottle jack never get under it like that

    • @HOLYSHIFT
      @HOLYSHIFT  2 ปีที่แล้ว

      Dangerous? Recall ?

  • @Tahara-Aichi
    @Tahara-Aichi 2 ปีที่แล้ว

    NO UNDERCOATING 👎 👎 that's going to eat away your frame

  • @fredjones1238
    @fredjones1238 3 หลายเดือนก่อน

    is this a comedy

  • @Misiracaltudamecekas-qw8xo
    @Misiracaltudamecekas-qw8xo ปีที่แล้ว

    1 year and rust will come again in the worst way