2013 Camaro Power Seat Switch Replacement.

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ม.ค. 2022
  • Troubleshooting and replacing the 6-way power seat switch on a 2013 5th gen Camaro.
    Left Side 6 Way Power Seat Switch
    amzn.to/3I4HKz3
    Right Side 6 Way Power Seat Switch
    amzn.to/46lJ90H
    Right Side 2 Way Power Seat Switch
    amzn.to/3nlgrZj
    Trim Tool
    amzn.to/3wtkxDy
  • ยานยนต์และพาหนะ

ความคิดเห็น • 29

  • @stevenc485
    @stevenc485 หลายเดือนก่อน +1

    Thank you for the video. Just had to replace this switch on my 2015.

  • @bridgettrodriguez387
    @bridgettrodriguez387 5 หลายเดือนก่อน +1

    Thank you for this. I seen all angles and you explained very well. I will be doing this maintenance soon for my passenger seat switch on my 2014 chevy camaro.

  • @suhleap
    @suhleap 3 หลายเดือนก่อน +1

    Thanks for the video! Was a pain trying to figure out how to remove the switch. Popped right out!

  • @chrisbrzon3917
    @chrisbrzon3917 6 หลายเดือนก่อน +1

    Was able to clean switch with contact cleaner after disassembly like u showed. Working fine again.

  • @retireditguy9493
    @retireditguy9493 10 หลายเดือนก่อน

    I just did this on a 2012 Camaro. Your video was very helpful. I had the same loose bracket too.

  • @helpingpains.
    @helpingpains. ปีที่แล้ว +1

    Very good demo 😊

  • @jaevionbrewer1673
    @jaevionbrewer1673 3 หลายเดือนก่อน +1

    Thank u just did my seats saved me 500$ from giving the chevy dealership

  • @TampaAries
    @TampaAries 2 ปีที่แล้ว +5

    Thank you so much for this video, I learned alot because of you. I have a 2015 Camaro but my switches look different than yours so i guess i have the two way switch you mentioned. My seat goes forward but not backwards, for a while it would go backwards occasionally but then it stopped going backwards completely but it still will go forward but i definitely try not to move it forward because it will stay in that position and i wont be able to move it backwards. I kinda figured the motor had to be good because it wouldn't work at all. Getting a new switch is the cheapest fix so i hope it solves my issue. Thanks again.

    • @Anthony-vz9nd
      @Anthony-vz9nd 2 ปีที่แล้ว

      Did it solve your issue ? Mines goes backwards but not forward

    • @philipfarruggio
      @philipfarruggio ปีที่แล้ว

      Seems to be an issue with a lot of these camaro seats, my drivers seat won't go backwards either but goes forward. I was just in the shop for an alternator that had the pully break off. I told them about the seat and they just ordered a whole new seat. I was shocked because clearly the switch is bad. I suppose when you have the platinum extended warranty that's the route they take. They will make more money on labor replacing the seat than the switch.

  • @Marogang7
    @Marogang7 10 หลายเดือนก่อน +1

    I just had this same issue I guess my button was hell of dirty idk I popped it off after watching was going to take it all apart but tried to move it anyways after popping it off and what do you kno me seat moved forwards

  • @scottthurman3625
    @scottthurman3625 2 ปีที่แล้ว

    Thanks so much I wanted to see inside of that switch.

  • @PlymouthBarracudaV8Hemi
    @PlymouthBarracudaV8Hemi ปีที่แล้ว +1

    Could you please advise a Part Number of the motor for Left seat recline adjuster (vertical seat back) ? 2009-2012 chevrolet camaro. It stuck and moves backward only

    • @737mechanic
      @737mechanic  ปีที่แล้ว

      If it moves backward then the motor is fine. It sounds like the switch is bad for the recline.

  • @1beautifulblackgirl
    @1beautifulblackgirl ปีที่แล้ว

    I have the same year as you but it's my driver side. The seat will raise up in front but the back won't. What switch do I ask for and can I order from any auto part store?

    • @jaevionbrewer1673
      @jaevionbrewer1673 3 หลายเดือนก่อน

      It’s the same
      Part jus driver side

  • @JuliaRodriguesxD
    @JuliaRodriguesxD 2 ปีที่แล้ว

    What is the name of the tool you used to take out the buttons?

    • @737mechanic
      @737mechanic  2 ปีที่แล้ว

      It is a trim tool. Similar to this one. amzn.to/3wtkxDy

  • @achap3604
    @achap3604 2 ปีที่แล้ว +1

    I am surprised-that the ms906ts doesn’t allow bi control for seat

    • @737mechanic
      @737mechanic  2 ปีที่แล้ว +1

      It isn't the scan tool, when I looked at the wiring diagram the seat wiring does not go to any module. It is still old school and wired directly to power and ground only.

  • @JohnSmith-qj3nh
    @JohnSmith-qj3nh 9 หลายเดือนก่อน +1

    Got it on sell

  • @helpingpains.
    @helpingpains. ปีที่แล้ว +1

    Is the 2012 camaro ss the same?

  • @R1g0M3d3r0
    @R1g0M3d3r0 2 ปีที่แล้ว

    Can you do more mileage correction with the XTool D8 with other makes and models I really want to buy one and want to know if it can do Nissans and Volkswagens etc…

    • @737mechanic
      @737mechanic  2 ปีที่แล้ว +2

      As soon as the opportunity comes up I will.

    • @katzenpapa
      @katzenpapa 2 ปีที่แล้ว +2

      I would imagine that changing the mileage in a car is a super rare event. You are going to be waiting a while to see he have to do that again. Cheers!

    • @737mechanic
      @737mechanic  2 ปีที่แล้ว +1

      @@katzenpapa Yes that is something that doesn’t have to be done much.

    • @R1g0M3d3r0
      @R1g0M3d3r0 2 ปีที่แล้ว

      @@737mechanic you think it would work on a 2013 Nissan Altima my dash broke and I bought a replacement off a junkyard near me but the mileage are way over like 230k and my original dash stopped at 114k

    • @737mechanic
      @737mechanic  2 ปีที่แล้ว +1

      @@R1g0M3d3r0 Not sure I have not done any Nissans yet.