JON BOAT STORAGE HATCH INSTALLATION AND REVIEW | 1648 Jon Boat Build

Join the community on Discord: / discord
In this video, I will show you how to create a bench seat storage solution for your Jon boat. This DIY project is easy to do and will help you maximize your storage space and keep your gear organized while out on the water. You will learn how to build a hatch lid to access the storage area under the bench seat, as well as how to install it in your boat. With this added storage, you'll have more room for all your fishing gear, life jackets, and other essentials. So grab your tools and let's get started!
Part 1 Video - • JON BOAT BENCH SEAT ST...
Part 2 Video - • JON BOAT BENCH SEAT ST...
Follow me on Instagram: @MVBOutdoors
/ mvboutdoors
---Product Links*------
Hatch Lid - amzn.to/4e4uxqL
Composite Speedlite Square - amzn.to/3FOnJMf
Rivet Gun - amzn.to/3FFtE7M
Closed End Rivets - amzn.to/3hBDu2d
Diablo Jig Saw Blades - amzn.to/3HG4icb
---Related Videos------
JON BOAT EXTERIOR PAINTING
-- • RUSTOLEUM TOPSIDE MARI...
How To Remove Jon Boat Bench Seat
-- • REMOVING JON BOAT BENC...
Jon Boat Transom Rebuild
-- • Jon Boat Transom Repla...
*Orders through the Amazon affiliate links above provide us with a small referral commission at no cost to you. Using affiliate links in no way affects our opinions expressed on this channel and merely serve as a method to help this channel grow while still providing useful, relevant information. ------------
#jonboat #boating #fishing

[@geneandrew1269]

I bought that same marine hatch to use to access and change out my filters in the ducting for the return air in my home gas furnace/ AC.

[@mvboutdoors]

Haha that's a great idea! It's a super convenient access hatch

[@andrewbrosseit8099]

I'm just wondering why you wouldn't trace the OUTSIDE of the inner lip instead of the inside. The hole needs to be bigger than the lip, right?!

[@mvboutdoors]

Yeah that would have definitely been the way to go, haha. After cutting I had to open the hole slightly for it to fit. I tried to account for it with the jigsaw by cutting on the outside of the line but yes tracing the outer edge of the inner lip would have made more sense.

[@KphOutdoors27]

Looks good man Can’t wait for the next episode

[@kansasfreeman]

How heavy are you ? I'm thinking of installing the same door in my floor to hide some anchors and other junk .

[@mvboutdoors]

I'm a big guy 270lbs, its a sturdy hatch

[@PowerhouseOffroad]

Looks great! I haven't checked in in a while! Nice to see the progress!

[@mvboutdoors]

Thanks for stopping by! Lots of progress!

[@shannonfrauenhoffer6276]

Looks awesome. I'm planning on buying the same type of hatch lid. Do you have an affiliate link on Amazon for them?

[@mvboutdoors]

Sure thing, here you go: amzn.to/3XsDMI2

[@mvboutdoors]

Hatch Lid - amzn.to/3XsDMI2

[@H.O.Joe2667]

Nice job! I was just looking at those lids on ebay and amazon. I was wondering what are you using for the box? (the inside compartment)

[@mvboutdoors]

Here you go: th-cam.com/video/J3N9DJJaqx0/w-d-xo.html
I cut down a rubbermaid type bin to fit

[@tommysluss3981]

how did you secrure the plywood to the angle aluminum?

[@mvboutdoors]

I predrilled holes and used stainless screws

[@drkronkron3061]

This is nice, but there is no actual handle/ tab to pull up the lid, you should epoxy resin a strap under the lid. I would install led lights inside the hatch so you can see inside at night! Cheers and I hope this helps you

[@mvboutdoors]

It's surprisingly easy to open actually! The locking levels work great as a handle but adding something else might be an idea. I want to make sure its easy to walk on and I dont want anything raise to be a tripping hazard. Great idea though!