Make sure to checkout my instagram to see behind the scenes: 2_vintage_ Go check out www.Laptwo.com for parts: Launching in March My Second Channel: th-cam.com/video/TPEgjamDX7s/w-d-xo.html Thanks to everyone who watches and supports the channel!
Good job Joe ! I love seeing the old left for dead bikes get a new life. After the sos pad, try running the heat gun across the plastics it should seal in the new surface you gave them.
On the plastics if you take a heat gun & run side to side it will bring the color back out you'll see it turn color I use that method it works, good video
Or get a cheap Yamaha blaster and put an FMF exhaust or a 240cc big bore kit and see the improvements.I was always wanting to no the effect an FMf and a big bore
I thought it was a china. At least it is running and riding. I bought three 4 wheelers and have 2 running. The china is getting a full workover and a70cc to 125cc swap. The Moto4 yamaha runs real nice but needs some parts to be a whole machine and the Eton needs the engine unstuck(in progress). Love to see 'em run again. 👍👍
If you want to get your plastics looking new if there all faded use a small plumbing gas cylinder and lightly torch them it brings the colour back 100%
Sick bro your realy good with bikes I’m learning a lot can we mabye get some riding footage of all your machines soon after we get a little further with the breeze keep it coming brother love the channel
what's about an old 250x those are a lot better then a 300ex. You can find those very cheap and the. They only made them for 1987-1992 so it will be hard to find a mint one
Couple things, I’d recommend taking the rear wheel off and taking it to a local tire shop and have them put a tube in it. As for the SOS pads, they work better when used with water. If using with WD-40, try ultra fine steel wool (Walmart has a variety pack, comes in a clear bag back by the paint) Yamalube makes an awesome carb cleaner soak. I believe it’s called Yamalube Carb Cleaner Dip. I’d recommend getting a cheap impact screwdriver from Harbor Freight. They’re like $10 and will save your ass. While you’re there grab a box of black nitrile gloves lol. Finally, you can use your heat gun to remove the white stress creases in the fenders. Just take your time with it and it will be worth it in the end. I’ve been working on these kinda things for a while now and while some of the stuff in your videos makes me cringe, some reason I keep coming back to watch. Keep up the good work, nobody figured out how to work on these things overnight.
I just got a polaris trailblazer 250 that's supposed to be white and its sat for about 10 years...got it running today..major carb cleaning and had to order a new petcock...took the fuel line off and the plastic nipple came off with it...but will wd40 clean the plastics up on it like that did for u? Its mossy and nasty from sitting
There’s often times no recovering plastics when it gets that bad. I will often times use dawn soap, hand rub with 3000 grit, and then spray SC1 on the plastics.
@2vintage I have a 1981 honda xl125 and it has very low compression to the point where it wont idle. I have a suspicion about the piston rings. But I was wondering your opinion. Thanks!! And great video.
Make sure to checkout my instagram to see behind the scenes: 2_vintage_
Go check out www.Laptwo.com for parts: Launching in March
My Second Channel: th-cam.com/video/TPEgjamDX7s/w-d-xo.html
Thanks to everyone who watches and supports the channel!
Still need to get that Honda 350X!
2vintage how’s that 85 Tri Z? I’ve owned 2 yellow 85 & a white 86!
Do you guys like these types of videos? Or what do you guys want to see?
2vintage yes
2vintage i love watching anything you make
Yes I love them
Your doing good. But u should get a 400ex
I think its cool to you watch fix up old quads that are dead keep up the great content. I think you should focus on fast quads though.
Famous last words:"Everything's Good To Go." I love it! Keep up the good work, Joe
I was just watching part one and got this notification
Has 10 year old oil says I'll change it if I have time lmfaoo
mrsmilesy Fuckin way she goes boys
WD-40 Sponsor 2vintage 2020!
why would they sponsor him if he already gives them free advertising all the time? lol
"It's a breeze to ride" rip juice wrld
I really like these videos when you work on them keep up the good work
Good job Joe ! I love seeing the old left for dead bikes get a new life. After the sos pad, try running the heat gun across the plastics it should seal in the new surface you gave them.
Get some maxima bio wash, spray, pressure wash, let dry, and spray some maxima sc1 on there.
Amsoils miracle wash is great .leaves a nice finish on plastics
Mark Collins wd40 doesn’t repel the elements nearly as well, and it takes off the graphics.
I’m so happy there’s another build series
I dont know if you guys have this but if you have buy it! Brake cleaner is the stuff i used it to clean carbs and other stuff it works soo good
had on the Yamaha blasters
Hot staple that piece back on, fill gap in with black hot melt glue, works great!!!
just loves grinding them gears lol
its cold out ,needs choke when cold. your getting better at working on stuff. good job
Nice videos man 🏍 💪
I love your videos you inspired me so much
Thanks man!
@2vintage that would mean so much
you never rev the shit out of it after sitting a long time!!
Says it runs pretty good and its smoking out the ying yang 😂
On the plastics if you take a heat gun & run side to side it will bring the color back out you'll see it turn color I use that method it works, good video
Or get a cheap Yamaha blaster and put an FMF exhaust or a 240cc big bore kit and see the improvements.I was always wanting to no the effect an FMf and a big bore
Use silicone oil after the WD-40 and scotch bright rub
I thought it was a china. At least it is running and riding. I bought three 4 wheelers and have 2 running. The china is getting a full workover and a70cc to 125cc swap. The Moto4 yamaha runs real nice but needs some parts to be a whole machine and the Eton needs the engine unstuck(in progress). Love to see 'em run again. 👍👍
Get a z400 or a 400ex both are fun and you would like them
For the idling issue is a screw you tighten on The carburetor
🔥🔥🔥
Would you ever consider buying a cheap yahmaha blaster and fix it up? Those sell for pretty cheap
Wow that little engine sounded pretty good , ganna be a good money maker , great find, keep it up!
Awesome bro!! Keep up the good work..
Bro dont get rid of it, they are a dang good four wheeler and are built to last!
I'd like to have something like that I'm paralyzed and that it's automatic it would be easy to ride like all your videos dude keep it up
Joe Narron maybe an electric wheel chair
@@EliteGamer21 already have one but I still like riding four wheelers
A chinease 125 quad can be shipped to your door for like 950 online.
Just an idea
@@isaacvoeller3208 junk
Rip juice
Great, always love to watch your vids!
Wipe it down with lacquer thinner, first, see what they look like when dry afterwords. I think you'll be surprised!!
This should be the new snow ripper ride it In the snow it has tiers that might go good in snow
Once you get it fixed up that would be a good machine for jade being an automatic
That flat spot in the tire is brutal
Then get a buffer and some compound after sanding and it will shine like new.
I got a ultra sonic cleaner for my carb and they work good
Clean/replace pilot jet and adjust idle better fix rear brakes can hear them when u ride
Put trim shine on it by more shine. But wash it first
Great budget builds tho
New subscriber from NC. Enjoy your videos. '92 Timberwolf, "07 Grizzly
I think you should get a Honda fourtrax 300 next or a 250 big red or maybe a 200 2 stroke blaster
If you want to get your plastics looking new if there all faded use a small plumbing gas cylinder and lightly torch them it brings the colour back 100%
Or maybe try your trusted heat gum it might do the same thing??
@@phillmitchelllpool2092 heat gun will work
If you're going to use SOS pads you need to soak them in water to activate the detergent in them. If you don't then just use steel wool pads.
Yes
Good job man
Buy a bottle of LA's totally awesome cleaner from the dollar store and thank me later works better than wd40 for cleaning plastics
Looks like smoke coming out the carb when running . Intake valve not seating right ? Like you video's mate
I have an ultrasonic cleaner and they are overrated. They do work but not as well as you think.
You should fix this little quad up at give it to Mrs 2 vintage ☺
MORE WARRIOR VIDEOS
if you had to buy electrical parts for this machine, where would you go? I have a 93 that I believe the stator is bad on.
Sick bro your realy good with bikes I’m learning a lot can we mabye get some riding footage of all your machines soon after we get a little further with the breeze keep it coming brother love the channel
Got to love the old motors sting as hell.
what's about an old 250x those are a lot better then a 300ex. You can find those very cheap and the. They only made them for 1987-1992 so it will be hard to find a mint one
Do cold starts on all your stuff
Dude the bike hasn’t run in how long ? And ur reving the engine up like that 🤦♂️ your learning though lol
Gonna blow it up
I had one that was in worse condition, it would blow up unless there was a piston issue. That is SUPER rare.
Watch and shut the fuck up don’t be jealous cuz he has more bikes than u
I am getting a 87 banshee next week for 500 dollars I cant wait
Couple things, I’d recommend taking the rear wheel off and taking it to a local tire shop and have them put a tube in it.
As for the SOS pads, they work better when used with water. If using with WD-40, try ultra fine steel wool (Walmart has a variety pack, comes in a clear bag back by the paint)
Yamalube makes an awesome carb cleaner soak. I believe it’s called Yamalube Carb Cleaner Dip.
I’d recommend getting a cheap impact screwdriver from Harbor Freight. They’re like $10 and will save your ass. While you’re there grab a box of black nitrile gloves lol.
Finally, you can use your heat gun to remove the white stress creases in the fenders. Just take your time with it and it will be worth it in the end. I’ve been working on these kinda things for a while now and while some of the stuff in your videos makes me cringe, some reason I keep coming back to watch. Keep up the good work, nobody figured out how to work on these things overnight.
This atv would sell for like a grand broke like this on Craigslist up here in ny lol
Keep it up man 👌🏻
no dislikes so far
KuntryBoy there’s one wtf who did it
and of course in 11 minuets the first dislike comes
@@braapboy8767 i dont know but when i find out ima clap some cheeks
Just install a tube on the left rear tire and it will work fine about $10 .
Just plug the tire if you can
the lights are controlled by the key switch
they have more power and speed than anyone thinks
Put the original swingarm on the tri Z
Man u got anuff atvs wow
Get a beat up 400ex
Ate you ever going to get a a 85/86 atc 250 or trx 250
Use something called carburetor cleaner!!
At least it doesn't have a manual clutch, so you can't grind the gears
Couldn't be more right.
Yeah this guy could screw up a cup of coffe
I just got a polaris trailblazer 250 that's supposed to be white and its sat for about 10 years...got it running today..major carb cleaning and had to order a new petcock...took the fuel line off and the plastic nipple came off with it...but will wd40 clean the plastics up on it like that did for u? Its mossy and nasty from sitting
There’s often times no recovering plastics when it gets that bad. I will often times use dawn soap, hand rub with 3000 grit, and then spray SC1 on the plastics.
What’s the rear tire size on your breeze?
Rip juice wrld
@2vintage I have a 1981 honda xl125 and it has very low compression to the point where it wont idle. I have a suspicion about the piston rings. But I was wondering your opinion. Thanks!! And great video.
Check the valve clearance first find out what there supposed to be set at
@@rabbyredpath3598 ok I will. Thank you!
2vintage is not the guy for advise he dosen't even know how to fix his own stuff.
Never give any throttle to starting one! Use the choke only. You’re doing nothing but flooding it otherwise.
Very fast 😳
Did he sell the KX?
100$ for a running quad and a bonus with it having reverse.
23:14 just presure wash them it will come off easy
Where is the key ?
Just put tubes in the tires be cheaper than new tires
Dude take off that stooopid back rack it'll look a little sportier - it's not a hunting machine. Good gf bike
Go back to the 2 stroke bikes, im so tired of quads
Hey what’s up
spray paint that back metal thing
Need to learn how to tighten valves
dwalker2431 Hell he will just spray some wd 40 on then and call it good
2 piece manifold.
Take the plastic parts away please so we can see better what you do, and somehow to learn something. thx
something is leaking
The carb needs tuning
There’s an idle screw on the side of the carb
just make a seat cover they are cheaper and easier
Before you get a new tire try tire slime
buy a honda fourtrax 200
🔥🔥