What is a gate valve? Wedge gate, Pipeline Gate and Pressure seal gate explained. How to spot them.

#gatevalves#pipeline
Welcome back to everything valves. The channel dedicated to brining you the best valve content. Please show the channel your support by dropping a like and subscribing.
This video was pretty random. I had a comment on gate valves and how to tell them apart. So I put together a quick video on how to tell the difference by appreance. There are various types of gate valves out there. In this video I will show you the difference between a Wedge gate, Pipeline Gate and Pressure seal gate valve.
This topic can get pretty long but I kept it simple to give you guys a quick overview. If you want to see a more in-depth overview on gate valves be sure to leave a comment below. If you enjoyed the video please be sure to help the channel out by liking and subscribing.
Thank you very much for the support and we will see you in the next video.
Check out more valve videos here.
/ @everythingvalves
For more valve information. Please visit the link below.
theaitg.com/

[@georgemohammed3948]

Picture of seats puller for 8"

[@minshadmusthafa]

Please post videos of the ways to remove metal seated gate valves which stuck in closed position where upstream is filled with huge volume and pressure without any drain and bypass system.

[@everythingvalves]

Sounds like you have a cavitation issue going on. Without knowing all the details it’s hard to say exactly what’s going on. They Make special features on gate valves that will prevent cavitation. I will try and make a video explaining that in the future. Good luck with your Valve situation. Thank you for watching.

[@minshadmusthafa]

@@everythingvalves thank you for your update. Actually it is stuck in closed position. It is DN 1200 mm metal seated valve of a rising main. Aprox 3.5km long without any drain provision, and aprox three quarters is full of liquid.

[@perdesh1990]

@@minshadmusthafa losse eye bolte then try

[@everythingvalves]

@@minshadmusthafa I can only give you my opinion of areas to look at. It maybe what they call pressure binding. That’s where pressure is trapped pushing against the gate. This link has some good information.
www.google.com/amp/s/www.littlepeng.com/amp/2017/07/20/valves-types
Sometimes loosening the packing gland bolting helps. This sometimes frees up things in the packing area. Caution because there could be pressure trapped.
Without knowing what kind of actuator or gear you have. That also could be the problem.
Hope this helps. Good luck with your project.