ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
How to install E36 / E46 Trailing Arm Brackets (Toe Correction)
ฝัง
- เผยแพร่เมื่อ 24 ก.พ. 2020
- ALIGN THAT BMW! ⬇️
bit.ly/BMWTOE
Now this is a problem that all BMW owners have faced when lowering their vehicles. Drift, stance, track, the toe goes all out of wack once the height of the vehicle is altered.
Luckily Drifttec has just the solution!
📺 Watch as Chris installs a set onto Joel's (@film.hq) E36 Drift Car. .
SUBSCRIBE FOR NEW VIDEOS WEEKLY ➡️ bit.ly/SUBTODRIFTHQ
CHECK IT OUT! 👀
Drift HQ Instagram ➡️ drift.hq
LIKE US ON FB 👍 / drifthq
Drift HQ Merch 👕 bit.ly/DHQMERCH
Keep up with the #DriftHQ Team! ⬇️
🚗💨 Josiah Fallaise (FD PRO 2 DRIVER / FDF FAB Owner):
/ josiahfallaise
/ fdf_fab
🚗💨 Alex Schlagel (FD PRO 2 DRIVER):
/ alexschlagel
🚗💨 Duarte Viana
(Drift HQ Co-Owner, Sales Expert, ProAm Drifter, 2JZ E46 M3):
/ duarte.hq
🚗💨 Savio Silva
(Drift HQ Co-Owner, Human Resources, ProAm Drifter, S14 LS ) :
/ savio.hq
🚗💨 Joel Garcia (Drift HQ Co-Owner, Multimedia, Web Design, E36 M3):
/ film.hq
🚗💨 Paulo Mota JR (Team Member, E36 2JZ Vert):
/ paulo10mota. .
🚗💨 David Alpert (Team Member, IS300 2JZ):
/ drra
🚗💨 Andrew Mauer (Team Member, ProAm Drifter, S14 2JZ):
/ andrew_mauer
🚗💨 Lukas (Team Member, ProAm Drifter, LS Turbo E36)
/ deprived_drifter
🛠🔧 Chris Steyer (Lead Mechanic)
/ magicman.hq
👨🏭 Josh "Crickett" Moore (Welder / Fabricator / Sales )
/ crickett.hq
👨🏭🔧 Kyle Bonnell (Welder / Mechanic )
/ turbobuddyguy
👨💼🔧 Alex Olbekson (Sales, Mechanics, Do everything guy)
/ alexolb.hq
That car is awesome bro 💙
I’m having trouble using these brackets with the pbm spherical bushings. Do these brackets work with them
bro the pilot Diego higa tetra brazilian drift champion professor João barion in the drift would compete with his 350z with the 2jz engine with more than 1000 horses but his condition is not so good to keep bringing his preparation team to stay going and going back to the USA, whoever was able to communicate the owner of Drift HQ and can give him the morale in the sponsorship will not regret it and 1st place in podio for sure
Do these provide more toe out or just toe in? I’ve got 7 degrees of camber and factory brackets drilled out are leaving me with about a full degree toe in.
Both Tow In & Out, the brackets come with mounting instructions that allow for as much toe in/ toe out is desired depending on bolt location!
Do these give as much alignment as doing the offset bushings ? Wondering if I can run centered bushings and then just get these cups
So what do you need the toe adjustment tool for?
Allows you to adjust more toe in/ out as you lower your vehicle.
My kit didn’t come with the bolts…what’s the bolt size and what grade should I pick up from the hardware store?
The new design uses the stock hardware
Can I just drill the trailing arm mounts a little so I can fix the toe in issue
We have seen it before but these brackets allow much more adjustment than OEM drilled will allow.💚💚
Bought a set for my e36 m3 and when I try to adjust out they hit the body and I can’t fully correct do I need to trim the bracket?
Check the instructions. Sounds like you didn't flip the bolt
do these work with offset rtab like the pbm spherical ones?
Jorge Avila yes they do!
Is it the same on a Bmw E90?
no
Does drift car use toe in or toe out?
Thaabit achmat adding toe in gives more grip !
just installed these but the brackets come in contact with the body on both sides (near the skirt) and i cant fully correct the toe, did i install wrong or is there a solution?
I’ve had that happen to. It seemed like i can’t get any more toe out. I’m going to have to research another method
Every find a solution for this issue?
flip the rtab bolt around
Can we get a Christmas discount?
Sorry, I don’t like music when I’m trying to learn something, but that’s just me.
Noted! Thanks for the reply!