Using UHF or Spread Spectrum radios you can operate an unlimited number of rovers from a single base. Just make sure all rovers have the same radio settings.
Assuming that you are going to post process the GNSS data from your drone you can set your Leica GNSS unit (GS14, 15, 16, and 18) as static receiver. This video link shows how to configure these units for static observations: th-cam.com/video/8LoJwaBCKxU/w-d-xo.html I would recommend a 1 second observation rate. Does your drone support RTK corrections? If so, you may need help from your drone vendor to setup RTK operations. Leica Captivate with our GNSS receivers can support several types of RTK base station configurations including UHF (403 - 470 mHZ) and cellular. There are also SpreadSpectrum radio (900 mHZ) options for some Leica receivers.
thank you so much for the video, you are amazing. I have a GS15 which is normally used as Rover but in an attempt to set it up as base, on getting to CONTROL-SETTING for radio frequency settings an error was returned "Configuration not possible, current radio firmware not possible". pls, what do I do in this situation?
Thanks for the feedback. Are you using an external radio with the GS15? If so, do you have the correct device selected? If you're not using an external radio, are you sure that the GS15 has an internal radio? They didn't include one as a default. You had to purchase this separately?
@@surveyorpop thank you so and very much for the reply. with further research, I discovered the instrument doesn't have a satelline but rather a Pac Crest ADL internal radio. Thank you again. you are amazing
Please contact your local Leica Sales or support technician for information on how to set this up. If you don’t know who that is, you can find contact information:leica-geosystems.com/en-us/contact-us/sales_support
Greg. Thanks a lot for this valuable information, really professional. Thanks a lot and congratulations.
Another great video Greg! You the man!
Dude, your awesome. Thank you for this!
Thank you for your valuable presentation with clear steps.
Would you make a video for operating 2Rovers from one base please ?
Using UHF or Spread Spectrum radios you can operate an unlimited number of rovers from a single base. Just make sure all rovers have the same radio settings.
Very Helpful Vedio Thank you So Much
Thanks
Been trying to figure out how to setup rtk base Rover without the network for a while now (rtn)
Thanks for the video. Do you know what the process would be to use the GS18 as the base for say a DJI Drone?
Assuming that you are going to post process the GNSS data from your drone you can set your Leica GNSS unit (GS14, 15, 16, and 18) as static receiver. This video link shows how to configure these units for static observations: th-cam.com/video/8LoJwaBCKxU/w-d-xo.html
I would recommend a 1 second observation rate.
Does your drone support RTK corrections? If so, you may need help from your drone vendor to setup RTK operations. Leica Captivate with our GNSS receivers can support several types of RTK base station configurations including UHF (403 - 470 mHZ) and cellular. There are also SpreadSpectrum radio (900 mHZ) options for some Leica receivers.
thank you so much for the video, you are amazing. I have a GS15 which is normally used as Rover but in an attempt to set it up as base, on getting to CONTROL-SETTING for radio frequency settings an error was returned "Configuration not possible, current radio firmware not possible". pls, what do I do in this situation?
Thanks for the feedback. Are you using an external radio with the GS15? If so, do you have the correct device selected? If you're not using an external radio, are you sure that the GS15 has an internal radio? They didn't include one as a default. You had to purchase this separately?
@@surveyorpop thank you so and very much for the reply. with further research, I discovered the instrument doesn't have a satelline but rather a Pac Crest ADL internal radio. Thank you again. you are amazing
How to connect using ntrip in indonesia
Please contact your local Leica
Sales or support technician for information on how to set this up. If you don’t know who that is, you can find contact information:leica-geosystems.com/en-us/contact-us/sales_support
👏 ρяσмσѕм