How to Make a Two Part Plaster Mold at Home! Ceramic Orange Juice Jug!
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- Thanks for watching y'all. Obviously, I'm not very professional when it comes to ceramics, I'm just out here having fun and doing my best.
Subscribe for more things, if you want!
SHOP evastalinski.com
/ evastalinski
Regular clay (for packing and the face):
www.silexshop....
Pouring slip:
www.silexshop....
Plaster:
www.gerstaecke...
Tension strap thingies:
www.logistiekc...
Underglazes:
www.silexshop....
www.silexshop....
This video was 100% what I look for in an instructional tutorial THANK YOU
trash bags for the plaster?!?!? GENIUS!!!
thank you so much this is exactly what I needed!! I’ve been so stressed trying to find out how to do this for my business to make easier dupes!!
A PeRfEcT vid for what I needed to see. Funny music but somehow appropriate
My gosh this is so much easier than everyone seems to make it out to be. Thank you so much.
That's what I thought before I started slip casting.
It seems like no matter how much one knows about ceramics there's always something else and when she says it's not a hard science she really means it 😁
Love it! RIGHT to the point thanks
Awesome job! Now you've given me the courage to try my 2 piece plaster mold. Genius for using old timey music to stay off the copyright radar ;)
Aw thanks! I'm so glad, let me know how it goes!
I loved this video! Thank you for sharing. Making a 2-part mold is easier than I would have thought! Now I'm going to go do it!
this video is absolutely delightful omg
Then turn it in to be recycled for a two for one! Just kidding...Beautiful job!!! Well done! Thank you! ❤ 🎉 😊
Very fun and practical presentation. No words makes it go faster - wee!
I know you say that you aren't a professional but your set up and tools are amazing!
This lady made it easy to understand !!!😁
Amazing!! thank you so much for making and sharing tis view, It was helpful to see the overall process
Terrific video ! Thank you!
Ty for your service
Brilliant!
damn i love this vid! cant believe youre doing this in your living room- big ups to you.
You make a lot of work look like so much fun.
You had me at the old-timey silent movie music. Well done!
Oh thanks, Joseph! The music seems to be a bit of a marmite thing... some people can't stand it!
@@evastalinski. what is the music? And I love watching your video. It's very clear and helpful as well as entertaining, I'm glad it exists
Very clear video! ❤ you used the plastic drink bottle to make the shape, but is it also possible to make the shape from a glass, resin or ceramics object? I would like to know if there are some material that you can not make the shape with? 😊
Who needs to be "professional" when you're doing what you love and sharing it with the world? I love your video, it was just what I was looking for. And, I'm now following you on Instagram. You've got a wonderful artistic world out there! Lucky you!
very nice- great idea turning the everyday mundane into something beautiful.
This just saved me so much research , thank you!
thank you I have a skate to hang on the tree and would like to make a mold for the double at the Craft store the kit was $45.00 and I didn't need all that I have to try this.
This is so incredibly inspiring
some sort of comfort in this video,maybe its the bedroom socks or maybe the music idk but thanks.
Thankyou so much, very informative and interesting. Great work.
The music drove me crazy
That snoozing pup ❤️🐶
Hope you see this! What do you do with the used clay? Do you process/recycle it or just leave it exclusively for future mold making? I understand plaster mixed with clay may cause explosions or damage clay for other purposes…
I love this channel 💙
Execellent job. Very well done. The end result was awesome!
I love this video, you have great skills! I absolutely love the milk carton vase, they are pure joy🥰 I'm a potter but have only made a plaster wedging bat which made a terrible mess! I'd like to make a mold of the carved vases that I make. They take weeks and hurt my hands/ wrists. I'm not sure about it working with the wide neck of the vase though! Do u have a video of how to make a spray booth? I hate brush on/dipped trans glazes, they do my head in😁
Very good diy! Feels like I can make it which is rare on mold tutorial. Can you tell me approximativly how thick it ?
Thank you so much! If you're talking about the thickness of the liquid plaster, I usually aim for a runny yoghurt consistency. As long as it's not too watery or very gloopy it should be fine.
wow they turned out super cool!!
very clear and straight forward but how do one bisque fire at home.
99% what I need, VERY nice
Great video! Usually mold making tutorials are so boring and intimidating. Thank you for making this!
Thank you so much, Sara!!
I do enjoyed whatching this video
Simple, lovely, lovely, lovely
Entertaining and informative. Well done, thank you.
that was great! I feel very inspired 🌻
I mega loved this ♥️♥️♥️
Hi! Do you possibly sell any of the plaster molds you make??
you’re my favorite, i love you 😭💗
thanks so much for the tutorial - you have made it so fun too : ))
Great video, I loved every second of it!
I love it ✨
This is such a great video omg
Nice video. So the dish soap stops the second, wet layer of plaster sticking to the first layer?
Loved the music BTW, and your bravery for slip casting in your living room.
I keep seeing people use that silky white looking soft soap liquid too for a more glossy finish
Brilliant, just what I needed to make my own mould :o)
Have you tried an egg shape for easter?
Hello miss
Can we cast gypsum slip in plaster mold
Any idea miss 😀
Love this! Now my question is, could I use this to actually store juice and other drinks?
Thanks Ana! That all depends on what type of glaze you use and how high you fire it. There's a lot of discussion online about what constitutes a truly 'food-safe' ceramic item and to be honest I'm not very knowledgeable on this subject, that's why I never claim to make food safe items. I know it is ideal when a jug like this is sintered, this prevents bacteria being able to grow in small crevices, which seems to be the most important thing along with a non toxic glaze.
Hello,
thanks for the great video!
i have a question, i can't open my mold with poured, it has been resting for 3 days already. what did i do wrong, is there a trick :(
Sorry for the Bad English
Hi Anni! Molds can be tricky like that, my best advice would be to pry a dull knife (like a butterknife/one you don't mind ruining) in between your mold parts and wiggle it around and apply a bit of pressure. This will usually cause the seal to break, but if you're not careful you can also damage the mold. I would also say three days is probably a bit too long to leave the slip in your mold, depending on what your mold looks like of course. Speaking from my own experience I usually try to un-mold small pieces a few hours after casting them and wait a full 24 hours for larger pieces. Hope this helps, let me know how it goes if you end up trying it!
So pretty! 😍
your art and aesthetic is so inspiring! I wonder, were you raised by artists? that's just the vibe I get :) keep up the amazing work!
well done!
So cute! Love your videos:)
thanks so much Tommy!
Love the video! It is the first one that isn’t so complicated! Question. Can you use plaster in the inside instead of slip?
Hi! Thank you for making this video :)
How thick does the slip need to be?
no puedo con esta música 😱😱
Thank you yes
Love your video and want more!
Love the video love the song 💖💖
Hello mam
Can we cast gypsum in such mold ??
Oho Stalin dear, again you r making a doll. Cute. Love you dear 😘. But you could try some hollow molding with your plaster mold. It would be more lightweight.
that was hollow
Eva - any idea how you'd make a mold to pour ceramic cheese molds where you'd want small holes in the sides and bottom of the poured 4" and 6" round mold? I was trying to think of how to create a mold with protrusions on the inside that will extend further than the thickness of the poured slip, then carving them off flush inside the green vase - this opening the holes.
Very nice video.. have couple of questions since i m new to casting and moulding... what kind of clay it is? Is it reusable?
what's a slip? is it just watered down clay?
Hoi Eva! Super fijn filmpje. Wat voor gips gebruik je? Groetjes!
What type of cement is this?
What do you pur in between the layers of plaster? Oil?
Just a little dish soap!
Love it
Awesome video. What kind of kiln do you use? and how long do you fire it for?
Hi Eva, thanks for the helpful video!
One question that bothers me: Do you apply the soap to the wooden boards? Or do they come off fine without soap?
Thank you so much for your great work! 😊
Hey Jana, thanks! I'm glad you found it helpful. I just soap the plaster since plaster sticks to itself which can make it hard to pry the two halves apart. I've always been able to pull the wood from the plaster easily without soap.
@@evastalinski. Thank you so much, that's really good to know!
Can I also use plaster for the pouring slip?
thats awesome!! I'm going to try it, where did you buy your supplies?
^^^^^
where are your socks from? also i love this sO much :)
Hello, is this bottle hollow when its finished? I really need help or advise and would love if i could ask you a few question please? Thanks
im not op, but yes, the bottle is hollow when finished
Great video! I had a question, I’m making the plaster mold rn and I forgot to add the dish soap will I still be able to remove the object from the mold? Thank you!
Probably! You may need to wiggle/pry/force it a lil bit. It mostly depends on what kind of material the thing you molded is made of. Hope it comes out, good luck!
Do you glaze the inside as well?
This maybe a silly question but could you do in a domestic oven 🤔
no, unfortunately household ovens cannot reach the temperatures kilns can that are necessary to properly preserve the clay
Can you do this with a paper mache form?
What kind of clay would you use
Very good video, i am thinking of making a 2 piece plaster mold, though i do not want to use slip, i wish to use grey cement, will the cement stick to the plaster??
if you brush the plaster surface with dish soap, i guess it should be alright
You really have to be very careful doing this. The dish soap isn’t enough to keep it from sticking to the mold. I would use cooking spray and quite a bit of it. Use it to make a small piece first and see how it goes and then go on to something harder.
What are your firing temperatures?
Hi! Great video! What material are the boards used to hold the plaster in?
Thanks! The boards are just regular MDF/particleboard, the cheapest kind they had at the hardware store, if I remember correctly. They've been holding up quite well over the past few years.
Thanks for the amazing video! It's what I was looking for. How thick do you need the slip to be? What is the proportion of water vs clay?
I'd suggest you to just buy slip clay. it's a liquid form of clay specifically for molding
@@rokarokoumije thanks! :)
I Hope i can this work for my project 😖😖😖
8 days later the mold is used with what mold release inside ?
There is no mold release becasue the plaster mold just sucks the water out of the slip, which is what she made the ceramic jus from, the casting.
Dope
Perfect video! till the adding of the face that is... ¨_¨
I made dozen of molds, turns out i did it wrong all along
Good video!!
But please wear gloves for the plaster
thanks for letting me know, I will from now on!
Is it necessary to keep it 8 days
Yes!! It neeeds to dry thoroughly or the slip will stick to the walls and fall apart. It has to be very dry. Depending on where you live it may not take as long.
Hi@@micheledickey4066 , Do you know how thick the slip needs to be, what is the proportion of water vs clay?
😍😍😍😍😍
music was atrocious but great information!
I make molds professionally.
I appreciate your effort.
Let's just leave it at that.
Well I’m glad she is making it simple for us non professionals.
sorry but terrible. plaster is not smooth enough and thickness of clay is not same in each side