Also keep in mind that increasing the compression ratio allows and even requires you to run less nitro methane. RC'rs outside of the U.S. use a lot less nitro methane in their fuel mixes than we do. 0% nitro is actually common.
I fixed it , I followed step by step your rebuild a new o ring each rebuild rule, it runs perfect and tuning is easy, I'm understanding this so much better and would like to thank you for sharing your knowledge. ✌️🏴😁
I do modifying but I do not do dlc coating. I do not know anyone that does Dlc coating. There is one person that does black oxide, black oxide is a black rust and actually makes the crank wear faster, I do not recommend.
@@pitbikecookracing3324 A Novarossi .28 will last 2x as long and make more power than the Lrp .32. It is $50 more but worth it. You could go with a Dynamite or Sh .26-.28 also Sh makes Lrp and Dynamite. Just get ahold of me through my site to have it modified before you run it.
I will. I’ve been pulling 12 hr days . Just to have something awesome. The nova is already dlc coated? Plus it’s really cold in Michigan. I’ll be calling you this week.
Rex great video!!
More of these please. Maybe how fuel differences with castor oil make the engine run etc.
Also keep in mind that increasing the compression ratio allows and even requires you to run less nitro methane. RC'rs outside of the U.S. use a lot less nitro methane in their fuel mixes than we do. 0% nitro is actually common.
tin wire for soldering inside the glowplug hole... turn your flywheel... mesure the pressed wire. no needed desmount the engine for it ;)
I tried that years ago and didn't care for that method.
@@TheRwmods your method is just teoric but doesn't work. The conrod have also clearance so if you want to have a precise misuration... 😘
Compression is going to vary depending on the port height in the sleeve
What are some signs of pre detonation other than a sandblasted piston? I have this weird noise on my engine.
It is hard on bearings, I have seen exploded bushings in rods. Weird noise like a growling/grinding is a rear bearing usually.
Can you look at picco for me plz see what u think p3x 21 off road ❤️✌️🏴
P3x, how old is that? Is it new or you need some work done to it?
I fixed it , I followed step by step your rebuild a new o ring each rebuild rule, it runs perfect and tuning is easy, I'm understanding this so much better and would like to thank you for sharing your knowledge. ✌️🏴😁
@@aaronbligh3619 Great to hear!
I know you’re really busy. But I need some dlc coating on my crank . The whole 9 . I just found your website.
I do modifying but I do not do dlc coating. I do not know anyone that does Dlc coating. There is one person that does black oxide, black oxide is a black rust and actually makes the crank wear faster, I do not recommend.
I’m looking for a motor, a 32 , 28 . But I wanted modded before I got it. I like the price of the 32 . What should I do ?
@@pitbikecookracing3324 A Novarossi .28 will last 2x as long and make more power than the Lrp .32. It is $50 more but worth it. You could go with a Dynamite or Sh .26-.28 also Sh makes Lrp and Dynamite. Just get ahold of me through my site to have it modified before you run it.
I will. I’ve been pulling 12 hr days . Just to have something awesome. The nova is already dlc coated? Plus it’s really cold in Michigan. I’ll be calling you this week.
@@pitbikecookracing3324 No the Nova is not Dlc coated, usually the engines with Dlc coated cranks are $350 and higher