Absolutely maddening. I stumbled across this video searching for rattles in a Subaru. I bought a new top trim 2021 Subaru Legacy Touring XT last summer. $38,000. It has more buzzing rattles in six months than the cheap Mitsubishi Lancer that it replaced did in ten years.
This worked great on my wife's 2013 WRX. One down side is now that those rattles are gone I hear others I need to work on. Again great idea and great DIY vid!
I'm amazed a company like this doesn't spend a few bucks on engineers and material to make their cars sound tight. Definitely not a car to own if you suffer from mysophonia. Plus there's the frustration of spending top dollar for cheap, buck-store technology. Blake, many thanks for this video. It helped a lot. I've now got to get to that pesky rattle around the backup camera, video screen in the centre console, then I will have finished the manufacturing job they should have done in the first place.
+Michael Kelly Yeah it's a PITA I'm sure you will find more rattles in the future. That's why my next car will be an Audi or BMW not of this rattling 💩.
I'm sorry to be a messenger, but almost all German cars have the same problems with rattling interiors. My current 2010 Mercedes E class has the most rattling interior I ever seen and it's a known issue. All 6 of BMWs I used to own had the same issues.
One tip that stood out to me while you were putting that strip on the side of your glove box is this: Think about where your start and end-point will be. Try to start in the least accessible spot and end in the most accessible spot. This way, you're not trying to cut the Velcro strip off deep in a narrow crevice that's hard to reach. So with the glove box in mind, start near the bottom of each run, and end near the top where it's open and wide...with lots of available space to work.
I have been battling rattles in a 2016 Ford Fusion. It's been in and out of the dealer. This video gives me hope. Looking forward to starting the tear down tomorrow.
Great advice!... You could also take some alcohol cleaning pads and clean the area where you apply the adhesive. There could be some residue left over from conditioning the dash which could allow the adhesive not to stick as well.
Great video. I started getting dashboard buzzing sounds while driving at low speeds on certain types of pavement after driving 9,000 miles. It's a 2020 Honda Pilot Black Edition which otherwise has a quiet interior. Thanks for the A-pillar tip. It might be useful to have your passenger try to debug where the sound is coming from by pressing parts with their hands or inserting temporary velcro, etc. Because the car acoustics are complicated by hard flat surface reflections it might be difficult to locate exactly where the sound is coming from, so it's best to keep an open mind when debugging.
Yes the rattle on my Altima has been driving me nuts since last October. I finally pinpointed it to 2 places. Same here...glove compartment also - which was an easy find for me. The 2nd annoyance boggled me, turned out to be the cover over my passenger seat belt assembly (covers the bolt) . The one side velcro SHOULD help this, I hope!
I've had two WRX's with rattles. Bought a new '17 and it came with many factory rattles. I was working with the dealer to fix them, and then I totaled the car. Called the dealer and told them not to worry, the rattles were taken care of lol. Replaced it with a new '18 WRX. This one still has a few rattles, but far less than the '17. Thanks for the tips, I'll try them out.
This video helped out so much. I had the same rattles on the A and B pillars on my 2011 sti and I did the same thing as you did and it worked! Thank you👍🏽
Just wanted to say 🙏 thank you, my car been rattling for a year now. Couldn’t figure out why or where. I was a day or so from literally going insane! Ty😊
Thank you for this video mate, I have the same issue on the A pillar and yes it happens when it's cold. I had it the whole winter last year and it went away this summer. Now that summer is ending and it gets cold in the morning, the rattle is back! :D
Modeling clay/putty packed behind inner door panels where speaker mounts or even cracked panels are vibrating against each other. Did it on my X6. Video posted.
Odličan video:).j Ja ima problem sa pronalaskom cvrčenja plastike oko brzinomjera u Mazdi 6 2021, ali mislim da je to veći problem za popraviti samome. Ako netko ima sličan problem sa istim autom, neka mi se javi.
The funny thing is all of these rattles have been around more than 9 years among all the subaru cars (STI, WRX, etc..), subaru never bother to fix these things..that's quite amazing to me. Just look at the forum like nasioc, same rattle at same spots from so many people......quality control, guess not.....
+pazu1 Then the fact when you ask Subaru to fix the issue they just give you the "We can't reproduce the noise" answer even though its all you can ever hear. LOL
My favorite part about it is. We have one of the noisiest engines ever, it almost always sounds like it's going to implode on it self. I just did a lightweight fly wheel and I think I'm going to do this today, the amount of NVH (noise, which is translating into vibration) which is driving me absolutely insane because of rattles more than the noise that's created.... you would think they would just add either sound deadening or come with foam, or felt liners especially on these problem areas. At the end of the day it's all about profit though so I get it
Dustin Talakowski It's all because of love. It's what makes a Subaru, a Subaru... remember? Lol. But seriously, all cars have a rate or two. My Fusion had one and I couldn't bare it any longer, so I fixed it.
If you're in the LA area and can fix it I can pay $200 cash...if you can fix it. I've already been to over 15 places mechanic, stereo, body shop. Most don't even want to look at. One guy drove on freeway, pressed down on dash, but still couldn't fix it. Only makes noise at freeway speeds.
Blake's Garage It worked like a charm! No more rattles on the front A-pillar! You've saved my sanity. Now that the front rattles are gone, I'm starting to hear other faint rattles near the rear C pillars. I'm going to put velcro on the C-pillars as well.
my drivers side door window rattles within the door when i close it (window all the way down). This doesn't happen with the other doors and they close solid. What stabilizes the top of the window when it is all the way down?
My only concern is the adhesive on the strips. If it gets too hot out are those going to melt and leave reside everywhere? I have had Velcro adhesive melt in the summer and its a mess to clean. Anyone had issues with the adhesive melting in summer temperatures?
I'm about to tear my whole glove box out.. there's something rattling every time I drive and I can't figure it out. It has nothing to do with the AC or the heat controls that could be completely turned off and it just happens when I'm like going over 30 miles an hour that I constantly hear this
You can download audio tracks that you play a certain frequency that will make vibrations happen. Download a few of them and play them on your audio system cranked up loud then once you hear the vibration you should be able to tune it in that way you can crawl around the car and try to find what the hell is rattling
Getting rid of them is the easy part but finding them has taken me almost a year now and i still havent figured it out.. I should just sell my shitbox and buy a new car..
blake866 Meh not really. Pretty much every door rattles when I play music at loud volumes. Definitely didn't insulate the doors to make up for the power of the Harman Kardon system..other than that it hasn't been too bad..yet.
Ian Caple Its kind of hard to sacrifice the extra weight to add aftermarket sound dampening. I going to try to get some scrap material and get this thing rattle free. Or at least for about a week. LOL.
I have a scion XA not sure if it's the plastic on the dash meter reader. Or if it's the windshield wiper area . Anyone have a scion XA I'm wondering what's this rattle coming from
so i fixed all my rattles in the inside and somehow with my shitty luck.. my bumper somehow got loose in the corner an is squeaky af. i cant take it no more and zip tie doesnt work!!!!!!
mine rattles from that little black hub in the the top corner of the passenger side windshield.. dunno what that thing is? blue tooth reciever or somethin?
It's a Subaru for Heaven sake. What do you expect? Just get yourself a bunch of pointed wooden tooth picks and jam them in the cracks. Looks terrible but works well.
![ลองสุ่มไอโฟน 990 โกงมั้ย? [ โกงมั้ยครับ ep.101 ] | DOM](http://i.ytimg.com/vi/bfsWe0j492k/mqdefault.jpg)
Absolutely maddening. I stumbled across this video searching for rattles in a Subaru. I bought a new top trim 2021 Subaru Legacy Touring XT last summer. $38,000. It has more buzzing rattles in six months than the cheap Mitsubishi Lancer that it replaced did in ten years.
This worked great on my wife's 2013 WRX. One down side is now that those rattles are gone I hear others I need to work on. Again great idea and great DIY vid!
I'm amazed a company like this doesn't spend a few bucks on engineers and material to make their cars sound tight. Definitely not a car to own if you suffer from mysophonia. Plus there's the frustration of spending top dollar for cheap, buck-store technology. Blake, many thanks for this video. It helped a lot. I've now got to get to that pesky rattle around the backup camera, video screen in the centre console, then I will have finished the manufacturing job they should have done in the first place.
+Michael Kelly Yeah it's a PITA I'm sure you will find more rattles in the future. That's why my next car will be an Audi or BMW not of this rattling 💩.
I'm sorry to be a messenger, but almost all German cars have the same problems with rattling interiors. My current 2010 Mercedes E class has the most rattling interior I ever seen and it's a known issue. All 6 of BMWs I used to own had the same issues.
This video give me hope.
I almost gave up with my car rattle
One tip that stood out to me while you were putting that strip on the side of your glove box is this:
Think about where your start and end-point will be. Try to start in the least accessible spot and end in the most accessible spot. This way, you're not trying to cut the Velcro strip off deep in a narrow crevice that's hard to reach. So with the glove box in mind, start near the bottom of each run, and end near the top where it's open and wide...with lots of available space to work.
I have been battling rattles in a 2016 Ford Fusion. It's been in and out of the dealer. This video gives me hope. Looking forward to starting the tear down tomorrow.
9 years later and your video helped me a lot! 👍
Great advice!... You could also take some alcohol cleaning pads and clean the area where you apply the adhesive. There could be some residue left over from conditioning the dash which could allow the adhesive not to stick as well.
Thanks again Blake for another helpful and USEFUL video. Like you, I like to hear my exhaust and my music, hate rattles.
This kind of shit drove me mad in a Peugeot estate I had from the rear. Just too many to find. sold and got a Mazda 6 and no rattles at all. Love it.
Thank you for the information. Yes, it's really great to fix it yourself rather than sending it back to the dealer.
Great video. I started getting dashboard buzzing sounds while driving at low speeds on certain types of pavement after driving 9,000 miles. It's a 2020 Honda Pilot Black Edition which otherwise has a quiet interior. Thanks for the A-pillar tip. It might be useful to have your passenger try to debug where the sound is coming from by pressing parts with their hands or inserting temporary velcro, etc. Because the car acoustics are complicated by hard flat surface reflections it might be difficult to locate exactly where the sound is coming from, so it's best to keep an open mind when debugging.
Yes the rattle on my Altima has been driving me nuts since last October. I finally pinpointed it to 2 places. Same here...glove compartment also - which was an easy find for me. The 2nd annoyance boggled me, turned out to be the cover over my passenger seat belt assembly (covers the bolt) . The one side velcro SHOULD help this, I hope!
I've had two WRX's with rattles. Bought a new '17 and it came with many factory rattles. I was working with the dealer to fix them, and then I totaled the car. Called the dealer and told them not to worry, the rattles were taken care of lol. Replaced it with a new '18 WRX. This one still has a few rattles, but far less than the '17. Thanks for the tips, I'll try them out.
I admire your thoroughness.
This video helped out so much. I had the same rattles on the A and B pillars on my 2011 sti and I did the same thing as you did and it worked! Thank you👍🏽
That a-pillar rattle has been driving me crazy. All I been doing is driving around touching everything trying to find it.
_bOmber_ LOL these cars are such rattle boxes. i did the same thing. Hope you can fix it its shouldnt be to hard once you find the source.
Lmao that’s what I’ve been doing driving around people must be looking at me like what is he trying to grab
Just wanted to say 🙏 thank you, my car been rattling for a year now. Couldn’t figure out why or where. I was a day or so from literally going insane! Ty😊
Thank you for this video mate, I have the same issue on the A pillar and yes it happens when it's cold. I had it the whole winter last year and it went away this summer. Now that summer is ending and it gets cold in the morning, the rattle is back! :D
Good shit man. I used foam tape, but same idea.
Modeling clay/putty packed behind inner door panels where speaker mounts or even cracked panels are vibrating against each other. Did it on my X6. Video posted.
When he said "reproduce", I felt it.
i like to use a few layers of electrical tape. It's thick but kinda soft so it compresses well. Good for keeping things from rattling.
Nice video man! Very useful keep up the good work
Thanks will do.
Hi Blakes garage why dont you try on honda civic 2016 lot of people facing issues with dash board rattle it will helps us even i am among them
Odličan video:).j Ja ima problem sa pronalaskom cvrčenja plastike oko brzinomjera u Mazdi 6 2021, ali mislim da je to veći problem za popraviti samome. Ako netko ima sličan problem sa istim autom, neka mi se javi.
The funny thing is all of these rattles have been around more than 9 years among all the subaru cars (STI, WRX, etc..), subaru never bother to fix these things..that's quite amazing to me. Just look at the forum like nasioc, same rattle at same spots from so many people......quality control, guess not.....
+pazu1 Then the fact when you ask Subaru to fix the issue they just give you the "We can't reproduce the noise" answer even though its all you can ever hear. LOL
My favorite part about it is. We have one of the noisiest engines ever, it almost always sounds like it's going to implode on it self.
I just did a lightweight fly wheel and I think I'm going to do this today, the amount of NVH (noise, which is translating into vibration) which is driving me absolutely insane because of rattles more than the noise that's created.... you would think they would just add either sound deadening or come with foam, or felt liners especially on these problem areas. At the end of the day it's all about profit though so I get it
Dustin Talakowski It's all because of love. It's what makes a Subaru, a Subaru... remember? Lol. But seriously, all cars have a rate or two. My Fusion had one and I couldn't bare it any longer, so I fixed it.
Best way to fix a rattling dash is go buy some tennis balls and get inside your dash and cram them in they work great
It’s a noisy Subaru 😂 the rattle and squeaks are all part of the experience 🤭
Nice video but damn, you went all-out on that glove box... Lol
Thanks for the ideas! Did you have noises or vibration in the tailgate? Im looking long time how to solve it
Regards!
Yeah that thing Ronald like crazy best solution is to sell the car lol
My Rio 2013 for the first time the dashboard has rattle and I can't fine it. Any suggestions I will thank you.
If you're in the LA area and can fix it I can pay $200 cash...if you can fix it. I've already been to over 15 places mechanic, stereo, body shop. Most don't even want to look at. One guy drove on freeway, pressed down on dash, but still couldn't fix it. Only makes noise at freeway speeds.
this is the funny thing with cars always, and the new ones seem more shit to deal with because of the light plastic and even the doors are the worst.
Did you open the radio as well ?? Kindly share.
My 2010 has rattled something awful since they pulled the dash (firewall repair) I've gotten used to it
You gotta love the subie rattle.
The all the buttons that roll my windows up and down rattle really bad
The dash creak in my 2012 dash makes me want to sell it!
CLEAN job.
Rattling sound in my car is from the AC vents. Any ideas on how to fix it?
bro i was ready to drive this damn subie off a cliff! I couldn't listen to any song that had any sort of bass because all i heard was rattle.
Jonathan Lavigne I folded up Microfiber towels and taped then in between the door panel and door frame. And now I can turn up the bass with no issue
Omg I have the same exact rattles on my '13 Sti. I'm going to try this on the weekend.
jedikn1te Right, its so annoying. Let me know how it goes.
Blake's Garage It worked like a charm! No more rattles on the front A-pillar! You've saved my sanity. Now that the front rattles are gone, I'm starting to hear other faint rattles near the rear C pillars. I'm going to put velcro on the C-pillars as well.
Name of the tape material for the a pillar?
can you tell as where to find the material you used please ?
And I thought it was my shocks! Replaced shocks and still there. I think it's in the pillar!! Liberty GT fifth gen owner, 96000kms!!
Yeah Subaru’s are plastic rattle traps 😂
What is the name of that tape is on Amazon
Is it on Amazon?
I have a really nasty rattle seems to come from the stereo controls on the steering wheel. Should I take it apart? Have you dealt with this?
What size is this Velcro adhesive tape?
Hey man, any link or name of that tape?
whats the name of the tape that you have used I want go try that on my car too ? thanks
Can U please share some link for this tape?
Wondering, can you hear the rattling noise by banging on the steering wheel?
my drivers side door window rattles within the door when i close it (window all the way down). This doesn't happen with the other doors and they close solid. What stabilizes the top of the window when it is all the way down?
Hello? The name for this material?
Nice video ......👍
Does it happened when you guys accelerate??
the material you used is what?
i want search it on amazon. but i don't know how to call this.
Hey Blake, how well has this held up?
It worked great. I sold the car in 2017 best decision ever. But this never came off and worked great.
Thanks man! That help me a lot.
Nice video Blake :D Thanks, i will try it on my Cupra :D
My only concern is the adhesive on the strips. If it gets too hot out are those going to melt and leave reside everywhere? I have had Velcro adhesive melt in the summer and its a mess to clean. Anyone had issues with the adhesive melting in summer temperatures?
I'm about to tear my whole glove box out.. there's something rattling every time I drive and I can't figure it out. It has nothing to do with the AC or the heat controls that could be completely turned off and it just happens when I'm like going over 30 miles an hour that I constantly hear this
You can download audio tracks that you play a certain frequency that will make vibrations happen. Download a few of them and play them on your audio system cranked up loud then once you hear the vibration you should be able to tune it in that way you can crawl around the car and try to find what the hell is rattling
he can come sort my car out any day.
My 02 intrepid has a annoying dash rattle. Can't figure it out.
nice job
Getting rid of them is the easy part but finding them has taken me almost a year now and i still havent figured it out..
I should just sell my shitbox and buy a new car..
Haha I did the same thing with my STI. Stuck cards and paper in all kindsa places.
I know right, so many rattles. Hows the 15 on rattles is it way better?
blake866
Meh not really. Pretty much every door rattles when I play music at loud volumes. Definitely didn't insulate the doors to make up for the power of the Harman Kardon system..other than that it hasn't been too bad..yet.
Ian Caple Its kind of hard to sacrifice the extra weight to add aftermarket sound dampening. I going to try to get some scrap material and get this thing rattle free. Or at least for about a week. LOL.
blake866
Haha good luck! Ready to see what you end up doing. Always looking for creative ways to get rid of those damn rattles.
subaru XV 2015 same issue and more :) ... windows rattles roof lights rattle ... . . every thing in this car is rattles
lol even my lexus is250 it's a shit rattle box
I have a scion XA not sure if it's the plastic on the dash meter reader.
Or if it's the windshield wiper area .
Anyone have a scion XA I'm wondering what's this rattle coming from
Difference between cars made in the West vs Japan.
omfg this dude sure knows how to flap his gums
That's pretty neat
hahah..Thank you Blake.
Rattles for days. Now I can't hear anything
I think straight pipe catless is the easiest fix for rattles. LOL
Felt letter stickers or tape from Micheals!
Could be your beard rattling 🤔
could be a flock of baby birds in his beard
Can an ants rattles his beard 🧔
awesome!
I just turnup the Radio 😂
so i fixed all my rattles in the inside and somehow with my shitty luck.. my bumper somehow got loose in the corner an is squeaky af. i cant take it no more and zip tie doesnt work!!!!!!
Yeah my my Subaru was a rattle box Hella annoying
Is anyone else having problems with a raddle going in the dash!! I need help. It drives me crazy knowing that it raddleds when I’m driving 20-25 mph
If it’s a Subaru I have the fix, sell the car but something European 👍🏼 Subaru should just be called rattleU
i finally stopped my rattles i moved to the caribbean
mine rattles from that little black hub in the the top corner of the passenger side windshield.. dunno what that thing is? blue tooth reciever or somethin?
MidWestBrick The ugliest thing ever. Thats the Satellite radio antenna. I hate that thing its so ugly.
MidWestBrick Also access port video will be up shortly.
Anyone in LA can help me with this?
It's a Subaru for Heaven sake. What do you expect? Just get yourself a bunch of pointed wooden tooth picks and jam them in the cracks. Looks terrible but works well.
pls help
This guy has too much time to waste...
Too much effort. Just get a better car.
Oh I definitely have
All new cars are plastic
Honda should work on it.