Play World of Tanks here: tanks.ly/3vjohWq and use the code TANKMANIA to get for free: ● 7 Days Premium Account ● 250k credits ● Premium Tank Excelsior (Tier 5) ● 3 rental tanks for 10 battles each: Tiger 131 (Tier 6), Cromwell B (Tier 6), and T34-85M (Tier 6) Thank you World of Tanks for sponsoring this video. The promo code is only for new players who register for the first time on the Wargaming Portal.
Your problem with the tanks weight, wasn’t even about its weight, you just had to replace the gray shock obsorbers with the red shock obsorbers! :) love your work tho man!
As a "Tracked Vehicle Expert" (TVE) I can point out some mistakes 1. The shock absorbers(grey) can't support the weight so you could replace them with yellow ones because they are a lot more stiff . 2. You need to put more support wishbones . The middle of the tracks were just empty , if you don't know what i'm talking about , look up "tanks" and look how many support wishbones they have on one track . 3. To get more torque , you could replace the motors with stronger ones . If you don't have stronger ones , just put more motors there (1 PF xl motor = 2 PF m motor) . If you can't do ANY of these , just make a bigger gear reduction , like 6:1 etc Note:I'm not a hater , I just want to help you on other MOC's and I love your videos no matter what mistakes you make . Keep up the good stuff ;)
well looking at the video, it looks like he just ran out of power because 10 motors draw a lot for power from one power brick. I guess he didn't know this but you can buy a Lego extension wire to connect another power brick in parallel.
Yeah those tracks need a little bit more work to pass on literally anything. I reccomend adding more suspension wheels and springs so that it can conquer rough areas.
i see atleast 3 ways that this could've been better 1) more support wheels on tracks (helps with weight distribution) 2) add atleast 1 wheel on top that actually tensions the tracks (spring should be compressed almost always) 3) a gear reduction on the turret, so turning is more accurate
The main broblem: Usually adding more motors increases torque, but in this case you put way too many motors compared to the number of battery boxes. 3 battery boxes can't feed 12 l motors and because of this, the motors only get limited power. This model could have run easily using 3 battery boxes and 4 l motors with a little gear reduction.
if you had two motors per receiver, and two receivers on the same channel, you would only have two motors per batterybox, and that would solve the torque ishue
Exactly what I was about to say! you can use left output on one reciever and right on the other. I've used this method with my rock crawlers to be able to use more batt boxes.
Reading all the comments I see that they are all missing the mechanics of tank tracks you have the control down really well but the fact that the tracks are coming off is due to that you have no track runners (aka the wheels in the middle of the track) they help keep the track on the drive line but they also do a lot more (aka stability, suspension and more). also another point modern tanks are only driven by the rear spokes for simplicity were as yours is driven by front and back which adds complexity and streess when its not needed. last thing i thought you could stack the output wires of the battery to get a better life/output.
Its Lego bro and not a real tank with one engine and a transmission. The motor and transmission sit in the back so the drive sprocket is in the back too. In a Lego tank with multiple motors it's actually simpler to put them in the back and front. It also decrases stress.
My opinion of the final product is that if there is any black colored tracks, then replace them with the gray ones. Plus if it wasn’t so heavy then you should cover up the back to make it slicker.
him: makes a huge freaking tank with motors with no instructions me: rethinks the fact that im good at lego and thinks about maybe buying a few more crates of lego
Hey bro! Quick tip, if you use multiple IR sensors hooked up to multiple battery boxes and put them all on the same channel (channel being the 1-4 option on your controller) you can control all the motors and have them hooked up to different battery boxes while still all being controlled by one remote. Hopefully that helps for future projects and if you aren’t quite sure what I mean I’m happy to clarify more. Great video though!
I am a massive dc nerd, my favorite dc comic is Frank Millers the dark knight returns. In that comic there is a bat tank so I had to watch this video and you basically made exactly what’s in the comic, the launcher in the top could be a bit longer but other than that it’s basically perfect! Great job man!
You know that IR receivers limit output current a lot, right? I doubt the 4 motors connected to one port give you the power you expect. An old crawler "V2" IR receiver is known to provide more current (it's also very rare). Also, battery box can be replaced with LiIon box for higher current.
We're no strangers to love You know the rules and so do I A full commitment's what I'm thinking of You wouldn't get this from any other guy I just wanna tell you how I'm feeling Gotta make you understand Never gonna give you up Never gonna let you down Never gonna run around and desert you Never gonna make you cry Never gonna say goodbye Never gonna tell a lie and hurt you We've known each other for so long Your heart's been aching but you're too shy to say it Inside we both know what's been going on We know the game and we're gonna play it And if you ask me how I'm feeling Don't tell me you're too blind to see Never gonna give you up Never gonna let you down Never gonna run around and desert you Never gonna make you cry Never gonna say goodbye Never gonna tell a lie and hurt you Never gonna give you up Never gonna let you down Never gonna run around and desert you Never gonna make you cry Never gonna say goodbye Never gonna tell a lie and hurt you Never gonna give, never gonna give (Give you up) We've known each other for so long Your heart's been aching but you're too shy to say it Inside we both know what's been going on We know the game and we're gonna play it I just wanna tell you how I'm feeling Gotta make you understand Never gonna give you up Never gonna let you down Never gonna run around and desert you Never gonna make you cry Never gonna say goodbye Never gonna tell a lie and hurt you Never gonna give you up Never gonna let you down Never gonna run around and desert you Never gonna make you cry Never gonna say goodbye Never gonna tell a lie and hurt you Never gonna give you up Never gonna let you down Never gonna run around and desert you Never gonna make you cry Never gonna say goodbye
Use more sprung wheels at the bottom, tanks have dozens of wheels stacked in a specific pattern to support the track and weight of the vehicle. With only 4 sprung wheels (2 on each side) they're not keeping the track tight and the body supported.
I thought of a way to use 2 battery boxes on one receiver. If u take 2 pf extension cables and attach one to each battery box and u take the other ends of the cables and connect the together and add the receiver connection on top of them and theoretically it should use power from the 2 battery boxes
Ideas: for the turret if you decide to build one again you could use the thing you used to pump the water out for the Lego coffee machine to launch it with the hollow half circles also you could have a button to activate it
If you take requests um, Can you build the truck that takes the batmobile and turns it into an arial vehicle and make it functional ? Anyways nice batmobile tank build!
Lego makes rubber nubs that go into those tank treads, look at something like the Ninjago Dieselnaut and you’ll see what I mean. Greatly improves traction
Hello! The reason that you could not go on The carpet is because you don’t have enough torque, you can increase your torque if you increase your gear ratio. The gear ratio you used was 3:5 it would be better if it was 1:5 but it would be slower. Anyways great video 👍!!
Video idea make lego fire weapons and try putting the fire on something that doesnt burn and if lego burns try making walls made by the same thing you use for where the fire will be and then add some desine and other features you think fits it
You don't have a problem with weight, the problem is the support wheels. Four is too little, you should increase the number of wheels that suspend the tank to redistribute friction by sharing it with more wheels... great work and chanel...
daaaaaaaang, if i had this guy's creativity, i would be over the moon..............aaaaaaaaaand, i have a challenge for ya if you could try and make a lego motor, WITHOUT using an actual lego motor, idk what i would do in return, but it would be so cool ngl! no literally, you wasted your time coming here but great video!
Looking at this thing reminds me of the Garmatron from the 2nd season finale of Ninjago. And not gonna lie, I was slightly underwhelmed with the official release of that set. You think you could do a version of that at some point? You’d make my day.
think you missed the point about why tracked vehicles are used for a lot of off road military vehicles, its not that they are fast but because they can across pretty much anything
Play World of Tanks here: tanks.ly/3vjohWq and use the code TANKMANIA to get for free:
● 7 Days Premium Account
● 250k credits
● Premium Tank Excelsior (Tier 5)
● 3 rental tanks for 10 battles each: Tiger 131 (Tier 6), Cromwell B (Tier 6), and T34-85M (Tier 6)
Thank you World of Tanks for sponsoring this video.
The promo code is only for new players who register for the first time on the Wargaming Portal.
It's funny how they just use one promo code for all creators instead of creating a unique one everytime as other companies do
What do u think of me I am a bit fan of yours
Your sooooooooooo cool 🤣
you can put two receivers on a battery box at the same time !!
Ye and you can also put 2 receivers on 2 different battery boxes and set them on the same channel to get the power you needed
Your problem with the tanks weight, wasn’t even about its weight, you just had to replace the gray shock obsorbers with the red shock obsorbers! :) love your work tho man!
You probably need 2 red ones on each lol
@@letsmakegames947 yeah probably!
Whats the difference?
@@mineblastersfiebig853 their much much stronger
I don’t understand
i have a lot of respect for this man, not only because hes good at making lego creations, but because he builds everything while standing up 💀
Y am with you bro he be like the Lego man he ain't get tired
Waaaiiit that’s true (my legs hurt just thinking about it)
As a "Tracked Vehicle Expert" (TVE) I can point out some mistakes
1. The shock absorbers(grey) can't support the weight so you could replace them with yellow ones because they are a lot more stiff .
2. You need to put more support wishbones . The middle of the tracks were just empty , if you don't know what i'm talking about , look up "tanks" and look how many support wishbones they have on one track .
3. To get more torque , you could replace the motors with stronger ones . If you don't have stronger ones , just put more motors there (1 PF xl motor = 2 PF m motor) . If you can't do ANY of these , just make a bigger gear reduction , like 6:1 etc
Note:I'm not a hater , I just want to help you on other MOC's and I love your videos no matter what mistakes you make . Keep up the good stuff ;)
well looking at the video, it looks like he just ran out of power because 10 motors draw a lot for power from one power brick. I guess he didn't know this but you can buy a Lego extension wire to connect another power brick in parallel.
@@daltonwaters2540 Ah yes , a man of culture as well
Yeah those tracks need a little bit more work to pass on literally anything. I reccomend adding more suspension wheels and springs so that it can conquer rough areas.
I would love to see a Batman tank in the World of Tanks video game!
I love AstonishingStudios
@@bmjared1 I love Brandon
would be tier 10 premium heavy
@@hansgetzemg4264 wouldn't happen because it is not real.
DO NOT SAY BALLS!!!
i see atleast 3 ways that this could've been better
1) more support wheels on tracks (helps with weight distribution)
2) add atleast 1 wheel on top that actually tensions the tracks (spring should be compressed almost always)
3) a gear reduction on the turret, so turning is more accurate
And he should’ve added the rubber pieces for the tracks
The main broblem: Usually adding more motors increases torque, but in this case you put way too many motors compared to the number of battery boxes. 3 battery boxes can't feed 12 l motors and because of this, the motors only get limited power. This model could have run easily using 3 battery boxes and 4 l motors with a little gear reduction.
here is another problem: you spelled problem wrong
@@asanguyen2823 Here is another problem, your punctuation is off.
@@kaidenwatts528 not everyone types with punctuation
@@asanguyen2823 And not everyone spells correctly
if you had two motors per receiver, and two receivers on the same channel, you would only have two motors per batterybox, and that would solve the torque ishue
Exactly what I was about to say! you can use left output on one reciever and right on the other. I've used this method with my rock crawlers to be able to use more batt boxes.
“Ishue” you mean issue?
These sets are absolutely incredible! It's insane how far Brick has come!
Reading all the comments I see that they are all missing the mechanics of tank tracks you have the control down really well but the fact that the tracks are coming off is due to that you have no track runners (aka the wheels in the middle of the track) they help keep the track on the drive line but they also do a lot more (aka stability, suspension and more). also another point modern tanks are only driven by the rear spokes for simplicity were as yours is driven by front and back which adds complexity and streess when its not needed. last thing i thought you could stack the output wires of the battery to get a better life/output.
Man’s out here writing paragraphs
Its Lego bro and not a real tank with one engine and a transmission. The motor and transmission sit in the back so the drive sprocket is in the back too. In a Lego tank with multiple motors it's actually simpler to put them in the back and front. It also decrases stress.
“All terrain, baby!”
_The Bat-Tank has stepped on a Lego._
thread the holes in the treads with rubber bands to create a grip allowing it to go over more terrain types
I Love How He Puts So Much Work In To His Videos And Thats Why I Love His Videos
Cool 👍
My ripsaw will smash wall with 10 times wide.
6 buggy motors !
you could either add rubber to the tracks or cut 3 of the wires so that the servo would be powered by a battery rather than 1/4 of it
2:23 "that should work , it's simple"
Meanwhile my brain : I like your funny words magic mam
My opinion of the final product is that if there is any black colored tracks, then replace them with the gray ones. Plus if it wasn’t so heavy then you should cover up the back to make it slicker.
That World of Tanks promo video surely explains the theme of the video which is ALL ABOUT *TANKS*
him: makes a huge freaking tank with motors with no instructions
me: rethinks the fact that im good at lego and thinks about maybe buying a few more crates of lego
in a future video you should build a big tank that's good on all terrains!!!
Aren't there cables that allow you to link two battery boxes? Would recommend checking them out
You Should make little Remote controlled tanks of Lego, and have a war that would be cool.
you are so talented 🍰
Challenge: make as close as possible replica of the Tumbler that can drive.
Bonus point: The interior is kept.
Wow! This looks so cool! I have that batmobile too but it is the old version! Love the design of the tank!
Hey bro! Quick tip, if you use multiple IR sensors hooked up to multiple battery boxes and put them all on the same channel (channel being the 1-4 option on your controller) you can control all the motors and have them hooked up to different battery boxes while still all being controlled by one remote. Hopefully that helps for future projects and if you aren’t quite sure what I mean I’m happy to clarify more. Great video though!
One thing i like about brick science is that you talk unlike most lego chanels
This is an absolute beast! Keep up the amazing work!!
The ASMR on the tracks is amazing also, well done!
Lmaoo did you actually build that Batman set in one sitting?
YO IM SUBSCRIBED TO YOU SACREDBRICKS
Pretty much lol!
Lego makes these orange things to attach to the bottom of treads to help them stick to more surfaces
I've been building with Lego for over 30 years (since I was three years old). Love your channel and I always learn something new.
I am a massive dc nerd, my favorite dc comic is Frank Millers the dark knight returns. In that comic there is a bat tank so I had to watch this video and you basically made exactly what’s in the comic, the launcher in the top could be a bit longer but other than that it’s basically perfect! Great job man!
You know that IR receivers limit output current a lot, right? I doubt the 4 motors connected to one port give you the power you expect. An old crawler "V2" IR receiver is known to provide more current (it's also very rare). Also, battery box can be replaced with LiIon box for higher current.
3:50 is the end of the sponsor for any of those who were wondering
We're no strangers to love
You know the rules and so do I
A full commitment's what I'm thinking of
You wouldn't get this from any other guy
I just wanna tell you how I'm feeling
Gotta make you understand
Never gonna give you up
Never gonna let you down
Never gonna run around and desert you
Never gonna make you cry
Never gonna say goodbye
Never gonna tell a lie and hurt you
We've known each other for so long
Your heart's been aching but you're too shy to say it
Inside we both know what's been going on
We know the game and we're gonna play it
And if you ask me how I'm feeling
Don't tell me you're too blind to see
Never gonna give you up
Never gonna let you down
Never gonna run around and desert you
Never gonna make you cry
Never gonna say goodbye
Never gonna tell a lie and hurt you
Never gonna give you up
Never gonna let you down
Never gonna run around and desert you
Never gonna make you cry
Never gonna say goodbye
Never gonna tell a lie and hurt you
Never gonna give, never gonna give
(Give you up)
We've known each other for so long
Your heart's been aching but you're too shy to say it
Inside we both know what's been going on
We know the game and we're gonna play it
I just wanna tell you how I'm feeling
Gotta make you understand
Never gonna give you up
Never gonna let you down
Never gonna run around and desert you
Never gonna make you cry
Never gonna say goodbye
Never gonna tell a lie and hurt you
Never gonna give you up
Never gonna let you down
Never gonna run around and desert you
Never gonna make you cry
Never gonna say goodbye
Never gonna tell a lie and hurt you
Never gonna give you up
Never gonna let you down
Never gonna run around and desert you
Never gonna make you cry
Never gonna say goodbye
You deserve respect ✨
long one
It was really impressive it had every detail
Jesus loves you❤
You do realize this is a video about Batman right?
@@CaptainRex332 so?
@@dommm3431”Jesus loves you❤” says the person on this video which has nothing to do with Jesus 💀💀💀💀💀
@@Tanks_Are_better_than_UTTP what do you think happens to us after we die?
@@CaptainRex332 what do you think happens to us after we die?
Shout out to anyone who actually built this this insane
world of tanks sponsor in a LEGO tank building, perfect combination
Use more sprung wheels at the bottom, tanks have dozens of wheels stacked in a specific pattern to support the track and weight of the vehicle. With only 4 sprung wheels (2 on each side) they're not keeping the track tight and the body supported.
Hello Brick science! Im sorry Im late. Ive had a ton of work to do. Finally got some free time! Amazing video!!
I thought of a way to use 2 battery boxes on one receiver. If u take 2 pf extension cables and attach one to each battery box and u take the other ends of the cables and connect the together and add the receiver connection on top of them and theoretically it should use power from the 2 battery boxes
Ideas: for the turret if you decide to build one again you could use the thing you used to pump the water out for the Lego coffee machine to launch it with the hollow half circles also you could have a button to activate it
I love the catto that randomly came in
I was playing World Of Tanks a half hour ago.
What he has actually done: building the Batmobile set
Happy Easter to anyone who sees this comment!
You could have used water pressure to launched the balls
I like The fact that sometimes when I watch other videos it have sponsors that make me feel like I am watching ads
We are gonna -Tank- the wheels off. XD 0:53
If you take requests um, Can you build the truck that takes the batmobile and turns it into an arial vehicle and make it functional ? Anyways nice batmobile tank build!
btw if u put 2 of the same receivers on different battery boxe's.. as long as the frequence is the same they will work as 1 :)
Best brick channel I ever saw!
Lego should make this as an set
Maybe if you added lego rubber studs to the tracks that would help with the traction on the floor.
Lego makes rubber nubs that go into those tank treads, look at something like the Ninjago Dieselnaut and you’ll see what I mean. Greatly improves traction
I love how you can see the machinery on the bottom of the tank
You are the best Lego builder in the world this is my first time watching🤩🤩🤩🤩🤩🤩🤩🤩
you should build a working lego Rubix cube
There’s little LEGO rubber feet for those treads
Amazing he actually made a career out of doing lego mechanics on a TH-cam channel. Wow.
World of tanks is amazing best sponsor ever!
I LOVE TANKS YOU SHOULD ALSO PLAY TANK BLITZ ITS SO FUN AND OVER 100 DIFFERENT TANKS
Hello! The reason that you could not go on
The carpet is because you don’t have enough torque, you can increase your torque if you increase your gear ratio. The gear ratio you used was 3:5 it would be better if it was 1:5 but it would be slower. Anyways great video 👍!!
Video idea make lego fire weapons and try putting the fire on something that doesnt burn and if lego burns try making walls made by the same thing you use for where the fire will be and then add some desine and other features you think fits it
Idea: A lego cat feeder
At 0:08 I think the joker thing is kinda good but you should add a more better stand then lego tires
When I'm bored and have no idea what to build in Lego I watch you😁
Smart + lego masters = brick science
I really think that set is pretty cool.
The Thumbnail Brick Science made: THE LEGO’S MINE!
bro u deserve respect u are a insane lego engineer!
As a person who plays world of tank blitz ( the mobile version ) they are pretty much the same but pc one got higher graphics, the game is so fun
The cat: oh. what you building, a tank? It would be a shame if someone destroy it 😏
You don't have a problem with weight, the problem is the support wheels. Four is too little, you should increase the number of wheels that suspend the tank to redistribute friction by sharing it with more wheels... great work and chanel...
That is exactly what I was gonna say! Lol.
I love ur videos of making lego inventions
For traction, you need to add Lego piece 24375 to the tracks and it will work on wood
daaaaaaaang, if i had this guy's creativity, i would be over the moon..............aaaaaaaaaand, i have a challenge for ya
if you could try and make a lego motor, WITHOUT using an actual lego motor, idk what i would do in return, but it would
be so cool ngl!
no literally, you wasted your time coming here
but great video!
It took him a full 8 minutes to clip together one full track. So a full quarter of an hour for both.
Looking at this thing reminds me of the Garmatron from the 2nd season finale of Ninjago.
And not gonna lie, I was slightly underwhelmed with the official release of that set.
You think you could do a version of that at some point?
You’d make my day.
Brick science:hmm iam making a tank so the sponsor is going to be about something is a tank
World of tank: make a sponsor about us
think you missed the point about why tracked vehicles are used for a lot of off road military vehicles, its not that they are fast but because they can across pretty much anything
It is nice that you actually read the comments. Love your videos
What a perfect sponsor! @brick science
in the next video you should make a Lego robot that puts a golf ball for you
You should consider working at Lego on some sort of premium,special build:)
I love it I love tanks it looks so cool but I wish you could've built the long thing were the tank shoots but it still looks cool
Am I the only one who's reminded of Frank Miller's The Dark Knight Returns?
Try use 2 spinning motors on top of each other to fire
Lovely bat-tank and i love lego so more and last cool batmobile
Snyder Cut meets The Dark Knight Trilogy... Epic...
I like the cat :D 8:53
Fortunately you had some experience with building very strong motors from that one video :)
;)
You should make the bat tank a machine gun turret so it can takedown multiple enemy’s
Did you know that he had to stand up for doing all of this just for content we should support him
Remember from Batman Begins
"He is in a vehicle.
Make and color?
it's a black... tank."
I forgot about that lol 😂
wow, you made a already cool looking lego set look even more cool
Super Shoutout Squad!!
i like how this guy has a sponsor but does not talk about it for the hole video
Hi Brick science! I’m ordering this Batman Lego and when I looked at this video I never knew it was that big!