Because in bracketing we just found our rough axis for example 90 degree but now we are not sure that 90 degree are correct or not...it could be less than 90 or could be more than 90..so we put handle with the 90 degree trial cyl axis..and by doing this we will see that at position 1 minus line will at 45 degree and plus line will be at 135 axis..so now we can move to our refined axis either it is before 90(towards 45) or after 90 ( towards 135).
How to decide whether we have to put -cyl or +cyl after confirmation of patients for position 1 or 2 and 3 or 4. Which axis we have to follow + or - . Pls clear this by updating in this video.
In every choice we have 2 axis ..one axis is for plus cyl and other is for minus cyl ..suppose at position 1..plus cyl's axis are 90 degree and minus cyl's axis are 180 degree ..now it's your choice you want axis in plus or minus.. But always minus cylinder is preferred. Hope you are clear.. And sure I will make a short video to make it more clear.
@@optometrywithkhurram6867 thank you sir. But I want to ask whether it depends on - or + sph which have corrected b4 cly power or we have to always follow - axis of jcc to correct. Also I want to clear my doubt about JCC ie both + and - cyl are 90° to each other and line shown on JCC are axis but I m little confused in power and axis using JCC.
@@optometrywithkhurram6867 Thank sir. I am asking this because of below prescription. R -050 +150 x 80° L +150 -200 x 170° One more patient got following prescription as L plano R +100 -100 x 170° Pls clear this issue
Good
Thanks
This takes a great deal of time to complete!
Excellent 👍👍
V.informative
Great sir je
Keep watching
Why for axis refinement put jcc handle parallel to trail cylinder axis ???? Plz ans
Because in bracketing we just found our rough axis for example 90 degree but now we are not sure that 90 degree are correct or not...it could be less than 90 or could be more than 90..so we put handle with the 90 degree trial cyl axis..and by doing this we will see that at position 1 minus line will at 45 degree and plus line will be at 135 axis..so now we can move to our refined axis either it is before 90(towards 45) or after 90 ( towards 135).
♥️
🌸
How to decide whether we have to put -cyl or +cyl after confirmation of patients for position 1 or 2 and 3 or 4. Which axis we have to follow + or - . Pls clear this by updating in this video.
In every choice we have 2 axis ..one axis is for plus cyl and other is for minus cyl ..suppose at position 1..plus cyl's axis are 90 degree and minus cyl's axis are 180 degree ..now it's your choice you want axis in plus or minus..
But always minus cylinder is preferred.
Hope you are clear..
And sure I will make a short video to make it more clear.
@@optometrywithkhurram6867 thank you sir.
But I want to ask whether it depends on - or + sph which have corrected b4 cly power or we have to always follow - axis of jcc to correct.
Also I want to clear my doubt about JCC ie both + and - cyl are 90° to each other and line shown on JCC are axis but I m little confused in power and axis using JCC.
@@jitendranevrekar705 I'll make a video ..I got your point Jitendra..dn worry..
@@optometrywithkhurram6867 Thank sir. I am asking this because of below prescription.
R -050 +150 x 80°
L +150 -200 x 170°
One more patient got following prescription as
L plano
R +100 -100 x 170°
Pls clear this issue
Excellent sir thanks you so much
So nice of you... Keep watching
Sir bohoth achese samjhate he agar hindi ho to our acha rahega
This Trail box how much sir?
Where did u buy sir nyc trail box i want to be
I purchased from shore.. Shah Alam market.
30k.
27923