That is very useful. But I don't understand why, when you put a drill chuck in there, what keeps the drill chuck from spinning. I understand why the spindle doesn't spin. It has a slot and key keeping it from spinning. But what keeps the drill chuck from spinning when it's inserted?
Hi Sam. It's a combination of the angle of the taper and the force applied. The Morse taper angle is designed to hold the chuck that's why you need a drift to remove a Morse taper chuck or drill from a drill press..If you don't force the chuck into the taper it won't lock and when you drill it will spin. But once locked and the drill pressure is applied this puts more force pushing the chuck into the taper and prevents the drill from spinning. If the drilling force is more that the chuck holding force then the chuck will spin.
@@enotsengineering How do you remove a stuck Morse taper? The arbor that I have doesn't have a tang and now won't pop out. I tried pushing the drill chuck with a spacer but it popped the drill chuck off the jacob's taper instead.
![กี่หมื่นฟ้า | Your Sky Series EP.1 [2/4]](http://i.ytimg.com/vi/qJbQs_nhjD4/mqdefault.jpg)
Fantastic explanation of how the tail stock is designed! Thank you.
Nice job Alan. I have a Jet lathe with the same setup on the tailstock. Thanks for the video!
Really useful video Alan , A great Help...Thanks
That is very useful. But I don't understand why, when you put a drill chuck in there, what keeps the drill chuck from spinning. I understand why the spindle doesn't spin. It has a slot and key keeping it from spinning. But what keeps the drill chuck from spinning when it's inserted?
Hi Sam. It's a combination of the angle of the taper and the force applied. The Morse taper angle is designed to hold the chuck that's why you need a drift to remove a Morse taper chuck or drill from a drill press..If you don't force the chuck into the taper it won't lock and when you drill it will spin. But once locked and the drill pressure is applied this puts more force pushing the chuck into the taper and prevents the drill from spinning. If the drilling force is more that the chuck holding force then the chuck will spin.
@@enotsengineering That is very helpful. I understand now. Thank you.
@@enotsengineering How do you remove a stuck Morse taper? The arbor that I have doesn't have a tang and now won't pop out. I tried pushing the drill chuck with a spacer but it popped the drill chuck off the jacob's taper instead.
Baik /good .terima kasih thank
Cool work
Where is grease nipple in tailstock ?
Hi I have one on the top of the spindle and one between the hand wheel and casting to feed the screw
Both are for oil
👍👏👏😀🇹🇭