⚡STREET BOB GETS A SLEEK ADVANBLACK ST FAIRING - FULL INSTALL⚡

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 มิ.ย. 2024
  • Get Your ST Fairing Here - shorturl.at/lnGT6
    Embark on an exciting journey with me as I give this Street Bob a jaw-dropping makeover! In this video, I guide you through the entire process of installing a full ST-style fairing on a Street Bob, transforming its classic look into a sleek, modern cruiser. From the tools needed to step-by-step instructions, this DIY adventure is packed with insights for fellow riders looking to elevate their bikes. Join me as I share tips and tricks for a seamless installation, turning this Street Bob into a road-ready masterpiece. Whether you're a seasoned bike customizer or just starting out, this video has something for everyone. Let's hit the road in style - buckle up for the ultimate Street Bob upgrade! 🏍️✨ #StreetBob #FairingInstallation #BikeCustomization
    Steve's Favorite Motorcycle Must-Have Tools!
    Master Hex/Torx Set - www.amazon.com/dp/B083Q5WZHS?...
    Swivel Head Ratchet - amzn.to/3MYeMEw
    Milwaukee M12 Ratchet - amzn.to/3VSR6W4
    M12 Battery - amzn.to/3gweokl
    M12 Charger - amzn.to/3Srrb53
    Ratcheting Wrenches (Metric) - amzn.to/3CQanyS
    Ratcheting Wrenches (SAE) - amzn.to/3Tt6iaY
    Blue Medium Loctite (Your Bikes Best Friend) - amzn.to/3gwdK6p
    FT LB Torque - amzn.to/3VON5SH
    IN LB Torque - amzn.to/3F4wCUA
    Vise Grip Plier Set - amzn.to/3TYZUs0
    Motorcycle Funnel Set - amzn.to/3sP9HFz
    Belt Tension Gauge - amzn.to/3FiiXco
    Noco Boost Plus Power Bank/Jumper - amzn.to/3W1squO
    As an Amazon Associate, I earn a very small commission from qualifying purchases. Thank you for your support and for helping our channel grow!
    #sikbaggers #harleydavidson
    🔴GET SOCIALISTIC
    🔗Facebook Group SIK Baggers - bit.ly/38GRKgI
    🔗Instagram - bit.ly/2HwBZge
    🔗My LINKTREE - linktr.ee/sikbaggers
    🎵All Music is Licensed Through www.epidemicsound.com
    Chapters
    0:00 Into
    1:40 - What's In The Box
    2:57 - Headlight Removal
    5:08 - De Pin/Re Pin Headlight
    9:08 - Build ST Bracket
    10:13 - Install Bracket/Support Bracket
    13:52 - Split Outer fairing
    14:45 - Headlight Bracket
    17:24 - Testing For Stock Bars
    19:18 - Remove/ De Pin Turn Signals
    31:47 - Install Inner Fairing
    33:10 - Install Turn Signals
    37:44 - Install Outer Fairing
    39:22 - Install Windshield
    39:58 Install Beauty Ring
    40:37 - Walk Around
    41:14 Thank You For Watching!
    VIDEO DISCLAIMER:
    This video is for educational purposes only. By watching and engaging with this content, you acknowledge and agree to the terms outlined herein. The information presented is for general educational purposes and does not constitute professional advice or create a professional-client relationship. Any actions taken based on this information are at your own risk. Neither the creator nor the channel shall be liable for any consequences of your actions. Exercise caution, use personal judgment, and seek professional advice when necessary. The content may not be accurate, complete, or up-to-date. You are responsible for complying with all laws and regulations in your jurisdiction. By continuing to watch, you release the creator and the channel from any liability. This disclaimer applies to all future content and interactions. Confirm your agreement by proceeding to watch.
  • ยานยนต์และพาหนะ

ความคิดเห็น • 105

  • @sikbaggers
    @sikbaggers  4 หลายเดือนก่อน +7

    ⚡⚡Hey everyone, thank you so much for taking the time to check out my video! I hope you enjoyed the content. If you did, please give it a thumbs up and consider subscribing for more awesome content in the future. Your support means the world to me! 🙌 Let's keep the conversation going in the comments below - I love hearing from you all. Until next time, be safe and keep your knees in the breeze! ⚡⚡

    • @kevinmeehan4549
      @kevinmeehan4549 4 หลายเดือนก่อน +1

      You are very detailed in your instructions on installs .

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      @@kevinmeehan4549 Thank you Kevin!

    • @SIERRA-dx9wm
      @SIERRA-dx9wm 4 หลายเดือนก่อน

      Little details are you
      Shiny side up👍

  • @DanielSeman
    @DanielSeman 4 หลายเดือนก่อน +4

    I just watched the whole thing.. just because. And I’m not installing anything. That’s how good these videos are 🔥

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      Thank you Daniel! Much appreciated!!! Always good to learn..Some of this info can be used on other bikes in other situations.

  • @Moonfleet41
    @Moonfleet41 4 หลายเดือนก่อน +2

    Hi Steve.. Great Install, i have a Street Bob, and did not know this item was available.. i certaily cannot afford a Lowrider ST... so what a fantastic option... better start saving and dropping hints..! Take care buddy, and stay safe. Del.

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน +1

      Hey Bro! Good to see you! Im with you on that..the ST's are pricey..this bike was a friend of mine and really wanted to get a another video out on the same ST fairing but on a different bike...just to show how easy they are to do...its a bit time consuming but nothing really hard about it. De pinning being my favorite part about it ( heavy sarcasm ) lol Thanks for stopping in, my friend! Be safe!

  • @MrJboggs48
    @MrJboggs48 หลายเดือนก่อน

    Thank you so much for all you do! I watched this (seems like 100 times) and was able to install the Advanblack ST fairing on my wife's 2019 low rider. I could not have done it without this. Keep up the excellent work!!

    • @sikbaggers
      @sikbaggers  หลายเดือนก่อน

      awesome...really glad to help..I know its a lot of parts...took me awhile to on my first one.

  • @scottschiller1153
    @scottschiller1153 4 หลายเดือนก่อน +1

    I really appreciate your hard work in making this video Steve

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน +1

      thank you scott! This one took some editing skills to knock down the size and it was still long lol

  • @weldermike7017
    @weldermike7017 4 หลายเดือนก่อน

    That looks great, good job man!!!!

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      Thank you Mike!

  • @marcponcini6794
    @marcponcini6794 หลายเดือนก่อน

    Thanks a lot man, you solved all my problems!!!

    • @sikbaggers
      @sikbaggers  หลายเดือนก่อน

      glad to help!

  • @120074
    @120074 4 หลายเดือนก่อน

    Fantastic instrucational videos, you definitely help us save money and time with your videos.

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      Thank you very much and glad to help!

  • @ryanm8456
    @ryanm8456 4 หลายเดือนก่อน

    Really great video. The de-pining process helped me a lot. This is something I struggle with.

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      glad to help ryan...maybe I can do a more detailed video soon on these connectors.

  • @patsamples6452
    @patsamples6452 4 หลายเดือนก่อน

    Another great video, Thanks Steve

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      Thank you for checking it out!

  • @shawnpayton499
    @shawnpayton499 4 หลายเดือนก่อน

    Thanks for video. Thanks for talking me through headlight situation today on phone. You the man steve!

    • @shawnpayton499
      @shawnpayton499 4 หลายเดือนก่อน

      We're you able to put the flat out bar back on?

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      No problem at all Shawn...glad to help!

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      Unfortunately no...there is too big of a space in there for one to overlap the other...they decided to get a different bar that mounts only to the bottom.

  • @Streetglide2021CRUISEN
    @Streetglide2021CRUISEN 4 หลายเดือนก่อน +1

    keep up the good work.like the show

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน +1

      Thank you Scott!

  • @samval2879
    @samval2879 4 หลายเดือนก่อน

    Great information 👍🏻 🎉

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      thank you! Glad to help!

  • @BT-ih6kr
    @BT-ih6kr 4 หลายเดือนก่อน

    really good video Steve. just enough detail and no boredom watching you do the same thing to the other side. one wish though, was that you would have had a diagram for the second pin removal like you did for the first one. i have struggled quite a bit trying to get those things out.

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      Hey BT....its the same as the headlight...pin in at an angle, slight push upwards. Those connectors are different but the pins are the same...just a little smaller. Thank you for checking out the video! Ill see if I cant do a video on de pinning several of the connectors in the future.

  • @tonynagel9403
    @tonynagel9403 4 หลายเดือนก่อน

    I have to say what awesome job on your video thanks for the imfo

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      Thank you tony! Glad to help!

  • @allanespiritu3
    @allanespiritu3 4 หลายเดือนก่อน

    Ugh I wanted to keep my bob fairing-less but this video is making me change my mind lol Great tutorial on this install and the step by step detail is top notch.

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      Thank you...glad to help!

  • @edwardsmith7409
    @edwardsmith7409 4 หลายเดือนก่อน

    Great video. Let’s see some of those videos on that Cholo Softail. I saw those fishtails.

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน +1

      coming soon!

  • @u.s.aarchangelforgod3679
    @u.s.aarchangelforgod3679 4 หลายเดือนก่อน

    TY Steve solid

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน +1

      Thank you sir!

  • @drainmonkeys385
    @drainmonkeys385 4 หลายเดือนก่อน

    That looks great…

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      I thought it turned out pretty good for a smaller bike...definitely integrated into the bike better than I thought it would.

  • @PhantomRider-78
    @PhantomRider-78 4 หลายเดือนก่อน

    Love your vids, thanks for sharing, would love to one day get a complete colour change to vivid black on my road glide special, sadly it is way to pricey for me, appreciate your clean content, have an awesome day

    • @sikbaggers
      @sikbaggers  3 หลายเดือนก่อน +1

      thank you Phantom! For some reason it put this comment in my "held for review" which I never check because there anything in the there..so sorry for the late reply!

    • @PhantomRider-78
      @PhantomRider-78 3 หลายเดือนก่อน

      @@sikbaggers no worries at all mate

  • @paullee4042
    @paullee4042 4 หลายเดือนก่อน

    Awesome tutorial,you did a great job explaining and showing the install. Were the rubber tank isolators put back ? Fairing looks great but theres a lot of open space between the neck and inner fairing, any setup to fill it.

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน +1

      Thank you, Paul! Much appreciated sir. We have to provide that room, same as the actual Low Rider ST fairing from Harley, it's a fixed fairing and you need that room to turn the handlebars/forks...kind of the same thing with a road glide. The plastic pieces on top of the tank bolts are not re-installed. Those are only trim pieces...they do not isolate anything. Part Number 61400491 TRIM, BRACKET, FRONT (RIGHT) 61400492 TRIM, BRACKET, FRONT (LEFT) I hope this helps! Thanks again! Be safe!

  • @TnAirwin
    @TnAirwin 4 หลายเดือนก่อน

    Nice! If you ever do ape hangers that require installing longer brake and clutch cables for ABS, a video showing how to do that would be awesome

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      I dont get many of those in here but you can bet if I do I will do a video on it! Thanks for checking it out!

  • @TheHelirius
    @TheHelirius หลายเดือนก่อน

    Hi nice video. Does that new headlight bracket would word directly on moosmc headlight ??

    • @sikbaggers
      @sikbaggers  หลายเดือนก่อน +1

      you can install the moons with some minor trimming...the baja kit fits right in though

  • @stephanebrochu2627
    @stephanebrochu2627 4 หลายเดือนก่อน

    Hey Steve, do you plan to have an instal video for the Road King Special version ?

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      yes I do...still waiting for someone local to lend me their bike to do it on lol ....not sure when Ill have it out.

  • @mrfairytail2385
    @mrfairytail2385 2 หลายเดือนก่อน

    What’s up brotha real quick question I actually replace the stock bars into 16 inch bars do I still need to relocated the turning signals still or I don’t need to move them at all

    • @sikbaggers
      @sikbaggers  2 หลายเดือนก่อน

      16's will probably clear depending on what windshield you run ...really hard to tell til you get it mounted.

  • @ukshotta1
    @ukshotta1 4 หลายเดือนก่อน

    Hi, can the Rockford Fosgate inner fairing be installed on this one? Thanks

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      Yes, they can be installed on our fairing however the RF kit is designed for the low rider st, so thats what it will be wired for. If you are doing this on a street bob it will not have the same wiring as the low rider for plug and play ...that doesnt mean you cant hardwire it though. lots of people have done it.

  • @inspirationmobile
    @inspirationmobile 28 วันที่ผ่านมา

    Will the flat out bar fits together with the fairing or do we need to take it out completely?

    • @sikbaggers
      @sikbaggers  28 วันที่ผ่านมา +1

      it will not work witht he fairing..you will need to get one that mounts sticktly at the bottom

  • @talkingrock7011
    @talkingrock7011 4 หลายเดือนก่อน

    Does Advan offer a touch up paint for this product , just in case of rock chips ?

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      Yes they do...they have all colors in touch pens.

  • @Timeline916
    @Timeline916 4 หลายเดือนก่อน

    Looks like we are going back to the old vetter fairings of 1970

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      agreed! Love the look though!

  • @nivekretneprac1
    @nivekretneprac1 4 หลายเดือนก่อน

    This seems to be fairly similar to what I'd have to do on my 2015 Road King. Is that true?

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน +1

      yes...this video can used across the board for various models..its all pretty much the same install.

  • @larrymyers1959
    @larrymyers1959 16 วันที่ผ่านมา

    what grips r on the bike and where can i get a set for mine

    • @sikbaggers
      @sikbaggers  16 วันที่ผ่านมา

      Vans ODI grips from J&P Cycles j-and-p-cycles.pxf.io/Jz7rDv

  • @ivansilva4559
    @ivansilva4559 หลายเดือนก่อน

    Can I install a Rockford speakers???

    • @sikbaggers
      @sikbaggers  หลายเดือนก่อน

      the rockford speakers are designed specifically for the low rider st...plug and play....just because it will technically fit, it wont plug into your street bob

  • @lonniedugan6120
    @lonniedugan6120 4 หลายเดือนก่อน

    Do you happen to know what grips those are? My son is looking for some red grips for his 2019 883 iron

    • @roncoulter734
      @roncoulter734 4 หลายเดือนก่อน

      Vans Grips

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน +1

      ODI VANS GRIPS

  • @vincentmurante5142
    @vincentmurante5142 4 หลายเดือนก่อน

    Hey Steve, Will this fit on a 2019 Softail Slim

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      12 to 17 slim as of right now.

    • @vincentmurante5142
      @vincentmurante5142 4 หลายเดือนก่อน

      Thank you

  • @charleslingerfelt4145
    @charleslingerfelt4145 4 หลายเดือนก่อน

    What saddle bags are on the bike

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      I installed those this last spring and I uploaded the video on the Advanblack TH-cam channel...you can check it out here th-cam.com/video/mR_myJJFgdQ/w-d-xo.html

  • @stevecooper9696
    @stevecooper9696 14 วันที่ผ่านมา

    So I’m guessing my Harley mustache guard won’t work either? I saw a picture of a street bob with the low rider st fairing and the Harley mustache guard on it.

    • @sikbaggers
      @sikbaggers  14 วันที่ผ่านมา

      If you saw a picture of it then someone figured out how to mount it

  • @rolandjosef7961
    @rolandjosef7961 4 หลายเดือนก่อน +1

    Can this be installed on 2023 Breakout 117?

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      We have not tested it on a breakout as of yet

    • @rolandjosef7961
      @rolandjosef7961 4 หลายเดือนก่อน

      @@sikbaggers thanks. Pls let me know.

  • @IzzyFitter
    @IzzyFitter 4 หลายเดือนก่อน

    What saddlebags are on the bike?

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน +1

      They are Advanbalck as well..check my video here th-cam.com/video/mR_myJJFgdQ/w-d-xo.html

  • @LukasHaslinger
    @LukasHaslinger หลายเดือนก่อน

    Do you have this type of Fairing for ah 2014 dyna to?
    Best regards.

    • @sikbaggers
      @sikbaggers  หลายเดือนก่อน +1

      you have to choose the bracket for 14 to 17 dyna low rider ...go to the link and use the drop-down menu to select the right bracket and choose the same on the drop-down menu for Support Bracket For The Bike Without Crash Bar Optionswww.advanblack.com/advanblack-color-matched-st-style-front-fairings-for-harley-low-rider-s-street-bob-fat-bob-dyna.html

    • @LukasHaslinger
      @LukasHaslinger หลายเดือนก่อน

      @@sikbaggers Thank you, is it possible to send the faring to Austria? I need it in Hard Candy Custom purple metal flake. It doesn't look like flakes in the picture. What other parts do I need? Is it possible to mount engine crash bars anyway? Do I get cables for the main light with it? Or is it plug and play?

    • @LukasHaslinger
      @LukasHaslinger หลายเดือนก่อน

      @@sikbaggers So I need this Color.
      98601 DSP Hard Candy Voodoo purple flake. Is this available?
      Best regards.

  • @ravenclaw7543
    @ravenclaw7543 2 หลายเดือนก่อน

    Where did you get that headlight bracket?

    • @sikbaggers
      @sikbaggers  2 หลายเดือนก่อน

      it comes with the fairing..i explained its the new bracket and the one in the fairing is the old bracket..so i showed how to change it out

    • @ravenclaw7543
      @ravenclaw7543 2 หลายเดือนก่อน

      @@sikbaggers Ok. I just got this fairing a couple weeks back and it came with the old style bracket that doesn't work with any off brand 5.75 light.

    • @sikbaggers
      @sikbaggers  2 หลายเดือนก่อน +1

      @@ravenclaw7543 email info@advanblack.com and ask for the new bracket as seen in the video

    • @ravenclaw7543
      @ravenclaw7543 2 หลายเดือนก่อน

      @@sikbaggers Will do. Thanks man!!

  • @bradlozano2571
    @bradlozano2571 4 หลายเดือนก่อน

    Very Kool...But i dont see how useful a Full Fairing is for a Bike with a 3.5 gal tank?...I think a Memphis Shade Road Warrior Fairing is more than enough for a StreetBob or Softail Standard....

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      Hey brad..thanks for checking it out man...im just not sure what tank size has to do with an st fairing outside of aesthetics maybe? It will certainly block more wind that that road warrior fairing will and that was the end goal for this customer. If you notice in the start of the video thats kinda what it had on it ..only the advanblack version.

    • @bradlozano2571
      @bradlozano2571 4 หลายเดือนก่อน

      @@sikbaggers With a 3.5 gal tank on the Interstate(Thats where you really need a frame mounted fairing)...At 80 to 90 mph your only gonna travel a 100miles on tank of gas (3.5)...A Road Warrior would do good enough if your a Hard Rider....But thats just me

  • @mrbigreddog420
    @mrbigreddog420 4 หลายเดือนก่อน

    💯🔥💯👍

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน +1

      thank you mrbig!

    • @mrbigreddog420
      @mrbigreddog420 4 หลายเดือนก่อน +1

      Thank you that is how I want to do my street Bob💯🔥

  • @KainamHD
    @KainamHD 3 หลายเดือนก่อน

    Just wondering, once I install one of these fairings on my bike, will I then be a geezer? 🤔

    • @sikbaggers
      @sikbaggers  3 หลายเดือนก่อน

      lol i dont know...I do know I had tons of requests for it so there are a lot out there doing it on the street bobs

  • @antoniobenitez7980
    @antoniobenitez7980 4 หลายเดือนก่อน

    🚬😎

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      Thanks for checking it out bro!

  • @thomasreyes2857
    @thomasreyes2857 4 หลายเดือนก่อน

    Can YOU say 116 thunderstroke. It will put a hurt on any Harley and you probably dont need to put it in sport mode. 😂😂😂😂😂😂😂😂👌

    • @sikbaggers
      @sikbaggers  4 หลายเดือนก่อน

      relevance to this video?