FZs V3 modification | Exhaust mod, Stickering, Fog lights
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- Hello Guys,
Please find your important links below:-
...................................................................
How to Change FZ V3 mudguard in 5 minutes at Home -
• How to remove mudguard...
.................................................................................
Best Helmet Under 2500/- Yamaha Blue Steelbird Review -
• Steelbird SB2 Helmet H...
.............................................................................
Buying links of Amazon-
* Allen key tool: amzn.to/33v3VcT
* Black Matt Carbon Fibre Wrap - amzn.to/2rLOErw
* Blue Matt Carbon Fibre Wrap - amzn.to/2S1RWBq
* Golden Glossy Wrap for Shocks - amzn.to/2tp77KJ
* Fog Lamps - amzn.to/2tssc79
* Steelbird SB2 Helmet (Yamaha Blue Matt) - amzn.to/2QAl7Jf
* Tank pad (Black) - amzn.to/2SM9obE
* GoPro Hero 5 Action Camera - amzn.to/2MxWQ6L
* Canon 200D - amzn.to/2MuC7Am
............................................................................
I hope you enjoyed watching this video, If so, please consider subscribing. I'd appreciate that. :)
#yamaha #FZsV3
You kept you bike in such a good condition...this shows your love with vehicles...good .keep it up bro..you are inspiration for others
Honestly, sometimes the exhaust of Fzv3 makes me feel as if it is dual cyclinder bike
Woahh!! Classy Modification done bro! Finally a video which i can refer to do changes on my bike :)
Waiting for the next one.. love from Alappuzha 😍😍
Golden wrap on foks love it 😘...
Thanks brother was waiting for your video because i have booked this bike
Those wraps are looking Great ! 👍
Nice dude .....🥰 like it...its sounds good....
WoWwww....Mine Also SamE Bikee...PlannIng To ModiFy Like Thiss...
I liiKee the louder exhaust soundd😜
Superb... Decent mods!! 👌 I need some ideas for A visor /wind shield & Front fender / beak like in Adventure Tourer bikes.. Please give me some ideas
Hey Andy, been watching your videos for a while now. Love your creativity with what you are doing on your FZ. I have bought the Matt Black one was hoping if you could help me out with small to all size spanners(mainly screw spanners) which could help me open up some nuts! Which are very difficult to open or tighten with ordinary spanners
amzn.to/3l5L5Tw have a look here bro
@@AndyRox have been looking at these for at least a year now,(as I bought mine last September) but wasn't sure of which one to buy. Thank you so much 🙏
@@AndyRox looking forward to design n cover up my silencer and the back of it as well. it got some major scratches and discoloration from an accident. Already glued the tank pad to under the foot rest like yours. Thanks for the links keep Posting 👍🤙
Its a real cool op modification 🔥
Hi bro, can you please tell us or make video on how to wrap carbon wrapper properly. It will help alot.
Ok bro
Yah, please give me the Guide...🙂
Nice video bro. Simple mods, but bike is looking nice. 👌👌👌❤️
I hope a motovlog from your end since u have better clarity and you will surely succeed in that
Ok bro. Thanks for your support ❤️🙏
Bike looking really awesome 👌
Just one suggestion try to fill the gap in your exhaust modification will be just perfect bike looking really awesome 🤩
Ok bro 😊👍❤️ i will do it. Thanks for your support
Well done my friend
Thank you bro ❤️😊
Solid
Make more vedio like this bro
Loved your nice touch with the bike 😇
I just need link for the wraps bro 🤔 can you give them if possible
In description bro
First shot🔥🔥
Which after market exhaust is better for fzs v3 bs6????
Best modified
Can you please make a video how to paste carbon fibre on bike
Hey Andy. Nice modification. I could see some rubbers on exhaust. Those are to protect from scratches. How can I get those or what they called?
That's normal tank pad, i cut them into small pieces
plz dada amy ai sticker laganor por koyekta still pic deben ??
ami same modified banabo
Is there any change in milage after modification
No
I also have same bike but grey colour plz upload a full walk around of bike so I can also modify 🏍🏍
Coming bro.. 😁
Bro will the exhaust modfication cause any problem to the milleage?
Bro your bike so stylel look
I also fz v3 fan
Please bro some more image send for me
Because I same modified
Please bro
Modified place only
Which engine oil should use
Remove grab rail bro and fix stock tail light
How to modifi the tail lamp and complete tail tidy modifications plz make a video on bcos I don't like
ok bro. I dont like it too. :D I will tidy it and make a dedicated video on it. ok bro? thanks for your comment.
ok bro. I dont like it too. :D I will tidy it and make a dedicated video on it. ok bro? thanks for your comment.
Is it possible to fit the fz25 tank to fzs v3..??
Exhust pe lagaya he vo pad kaha se purchase kiya bhai plz share link
How do you clean your bike
Longer screws kitne inch ka hia
Bro my number plate is fitted by the company can install frame on it. Then how .plss help
Well at 4;05, The brakes literally saved you man from that idiot !!! The brakings are really good on FZS V3. What have you done to the shock rod to make it golden?
Can you post your full bike photos...? It’s looking good so I can also modify like that...?
Bro, New video Coming up with 360° walk around View. Just give me two days. I will shoot, edit and boom.. Upload bro😁
You didn’t post yet
@@safrassammoon1464 bro i uploaded a photo today. Check my Story or my Community tab bro
Any idea how to pop off the 2 chromed fake intakes on the tank, so that they can be painted not on the bike?
Wow very nice video
Thank you very much ❤️😊
Hii bro your bike so awesome can you help me for modifications my same bike I have black colour please replay
Yes bro
Bro. I have this fz v3. But my bike vibrates in 5000 rpm but it not vibrates in others rpms . Is this happens with your bike?
My one vibrates at the top end RPM
Same bro mine also vibrates at 5k rpm but not after that
Mine to vibrates in 4000-5000 Rpm in 2nd and 3rd gear. And 3rd gear is a bit hard and makes noise when shifting..
@@akulchadha2069 Yeah.. same..
It's due to engine oil
Bro, pls read
Why don't you try Mounting the tail taidy into the tyer hugger like MT-09
I really want u to notice, so am commenting in every vdo, plsssss
Where can we get carbon fibre rap
How cn i modified tht hazard light plz tell me.. there is wire cutting or not?
Wrap paper kidhar se kharida
AGOG 3D Black Carbon Fibre Textured car wrap Sheet Vinyl roll Film Sticker Decal Twill-Weave Matte Design www.amazon.in/dp/B07NVKWQTH/ref=cm_sw_r_cp_apa_i_PAo7DbR1DV0K6
Is this exhaust modification safe? any harm for bike engine?
It's the safest exhaust mod we have ever got bro 😁👍 you got sound mod and the engine performance remains the same
@@AndyRox Haha... cool... 🤘❤️
Also give me som idea for Off road fender bro.. My insta id is dadhiwala_traveller.. whts ur id?
@@DadhiwalaTraveller my Instagram bro 👉 andyroxfitness
@@AndyRox 👌👌👌 how did you get this thought bro?
I just went near my bike with a screw driver to remove that exhaust cover. Realized it needs an Allen key😂😂😂
How much inch nut bolt
Lights in air filter???
Which oil is best for fz v3 e.g.(motul 7100)
I am using Motul 10w50 100% synthetic
@@AndyRox ok bro 🤘
@@AndyRox It is a fully synthetic one. after how many kms are you changing that engine oil?
what is the cost of carbon fiber
Always fzs v3 breaks saved me
Amazing breaks. Front break with abs is a life saver.
Bike comes to halt without skidding within just a few seconds. Abs in FZ is 👌👌👌❤️
Carbon fiber sticker tutorial
Exhaust mod ka mileage change hoga ki nahi
Mileage same rahega
Bike looking sexy bro...!!!
Why you get your mud guard back again?
Too much mud spill bro 😭 destroying passengers dress 👗 😩
@@AndyRox do you feel the looks of fzs v3 is little bit average when comparing to other 150cc bikes?
@@user-el1pn3fi7e i agree bro. Yamaha could have modified the head and tail light to make it better. However, I love the muscular look of this bike.
@@AndyRox 😂😂 bike looks great without that Tyre hugger.
I liked how much cost please
Bro every parts are in the video description. I attached all the amazon links. You can check the updated price there bro. 😊❤️
Bro, is it possible to change the stock digital meter console of fz-s fi v3? It looks very small than its appearance. Plz do notify. I need this idea badly.
Yes bro you can install aftermarket speedometer.
@@AndyRox bro can you give me any brand name? Or picture?
Email me at maher.wizard@gmail.com if there is any possible idea. Plz.
❤❤❤
👍
How can i buy usd folks?
What is ur top speed on this bike ?
118
Same bro y this bike is not going above atlest 120
Heard that top speed can be increased by changing to a new rear sprocket having less number of teeth.
Stock rear sprocket has 41 teeth. We might have to look for 2 or 3 teeth lesser one. In case If I try this, I will post here.
I didn't get the longer screw in my location can u help me to get that
That change in exhaust sound, is it legally okay?
Yes it is
Bro also give that nut size/type or buy link ❤️
Check Video description bro
Any impact on the mileage due to exhaust?
No
@@AndyRox Thank you. Your video was helpful.
I am going to try this exhaust mod. Very simple mod, but sound changed drastically. Superb sound👌👌👌❤️
@@AndyRox bro for FZ, any idea if we can safely remove db killer (if stock exhaust has it)?
Safely means I must be able to revert it back.
@@girishd5075 are u done modify bro ?? Can u help me
Bongar kon dokan theke asb modification??
অমল এর garage , 2no. Rail gate
service o okhan theke hy?? bike horn ,fog light all okhan theke kora??
r akta jeta blbo bike er Rear brake ki lagena brake korle ?? ami kenar i66a bike ta..bt rear brake vlo na sun6ilam..akyu jdi details blte
Link of fog light
Bro can i change the headlamp of my fz v3 it's looking very ugly now
Yes. You can change it bro. As i have a plan to install Mt15s headlight in future
@@AndyRox Thanks for instant reply will it look good if i install headlamp like bmw g310r bike
@@vipulsuthar915 you can photoshop and have a look if it looks good, then do it bro. 😁👍
What if we remove db killer?
I got this question in my mind too.
@Andy Rox, any info on this?
Hi andy...i really like this video from you...
I am also a owner of fzs v3...
Now the question is.....
The yamaha fzs v3 works on Fuel Injection....
A mechanic told me...
If you attach fog lamps then we have to cut some wires ...because of which you will loose your warranty....
Another one told me....attaching extra equipments can cause short circuit which can lead to malfunctioning of Fuel Injector.....
And hence bike wont start...
Beacuse FI works on electrical circuit...
I also feel that light is not adequate on road...
Help....
1. Yes if you cut any wires you are going to void warranty.
2. There's no problem with the fuel injector if you cut wires. Don't worry
@@AndyRox thanks a lot....for fog lamps which LED should i use?
@@sachinchaudhary6370 i am using a cheap pair of Fog lamps. Costed me around 500 rupees bro.
@@AndyRox thankyou so much
Bro millage kitna deta hai ??
45 - 48 bro
@@AndyRox thanks bro
bro is this the bs6 model?
No bro, it's bs4. Don't buy bs6, if those two colors are not your first priority.
okk🤔
@@lucifer_axom bs6 has less power compared with bs4. And the mileage is same. So you are paying more for bs6 and getting less power bro. I will make another detailed video on this topic.
yeah thats true...🤔 i saw the review of that bs6
@@lucifer_axom oh ok. bro, you are from Assam?
Harzard me kitna kharcha hua
20 rupees
Ek cell me start nhi Hoti?
If you twist your pickup before you hit the start, it doesn't start. You have you leave the pickup. I always forget because of my last bikes habit 😅
@@AndyRox true In fi bikes just give a cell don't twist b4 cell it will harm self motor as well as battery
usa 😂😂
fz lovers😍😍😘😘