Key Battery Astra Insignia Corsa Non-Folding HOW TO Change
ฝัง
- เผยแพร่เมื่อ 4 เม.ย. 2018
- This video wll help you to change the key battery on the Astra J, Corsa and Meriva Models. This is a very easy job and you just need a small screwdriver and a new CR2032 key battery. You do not need to reprogramme the central locking afterwards. We hope this helps you to change the key battery.
Transcript - แนวปฏิบัติและการใช้ชีวิต
I managed to lever it open with the sharp and strong point of a corn-on-the cob holder... but absolutely make sure you don't slip!
Agreed, they’ve made it a bit tricky
Thanks a lot. Saved me some money !
Thanks. Finally opened my Zafira key fob without resorting to using a hammer. 👍👍👍👍
I know Cliff, they are really tight sometimes! Pleased it saved your key ;)
Could you please show how to replace the button side as mine the button is both gone
Thank u
Hello. I didn’t make a video because these keys are a complete nightmare to open up. Unlike the flip version, the only successful way is to melt the outside of the key with a soldering iron all the way around. Then the two halves can be split, but it’s still trick to get the circuit board out without damaging it
Handy vid, helped me crack open a 2014 Zafira key and replace battery for a mate who had only been able to get in by a key in the door in the year or so she'd owned it.
Well done, good to hear this,especially when it's not been working for so long :)
Thxs, 2013 Astra key-fob battery replaced.
! Thank you for this video too mate ! Really helpfull !
You're very welcome, really pleased it helped :)
Thank you very much changed wifes spare key👍
Nice! Hope she was impressed ;)
Really handy video. Thanks so much.
Thanks for the feedback :)
Brilliant thank you.
Hi Brian, thanks for the feedback, glad it helped :)
Thank you
You're welcome, glad it helped :)
Thanks for this.
Would you know where to get the best price for a replacement key for this type? Only have one key now as main key is lost and I only have the spare fixed blade key to hand.
I would find a local car key man. The best way I have found to do this is by asking your local garage who they recommend for car keys. They usually have a number of someone they use
Are these keys able to be swapped to flip keys??
@@jamescullen4450 Nope, the internal board is different, a new programmed key is needed, from what I was able to research.
Anyone know how to get into the circuit board of this key ?
Did you find out how to remove the circuit?
Is it possible to replace the casing of this key? Mine has a hole where the open button should be
Hi Karen, this is a very tricky job if you don't have the equipment, it's not like the flip style case. We do offer a repair by post service, give us a ring if this helps. 01522 514141
@@TheCarKeyMan is it possible to open this type of key? I wanted to switch it to the flip version, i changed the flip version myself on the main key but this is the spare and as i share a car with my partner we were going to keep a key on each of our keyring
I bought another key flip replacement thinking i could just open this and take out the PCB and key much like i did on the main flip one, but i cant get this one open at all?? all i can do is get access to the battery
what would i need to open this to get the actual key and little pcb out
Can i upgrade this key to a fob or other modern key ?
Hello, this key has a different shaped circuit board to the flip key, so no, you cannot upgrade it, sorry
How do you get to the circuit board on one of these keys ?
Hi, well this is a horrible little job to be honest. The circuit board is sealed inside and the plastic needs melting all around the edge with a soldering iron. Watch your fingers!
How do you get the circuitboard out mate? It seems sealed in
Hi, sorry I've been away. No it's tricky to get it out I'm afraid
I did this with the correct battery and it's still not working any idea ?
Hi Gary, did it work before you replaced it?
Would be nice if you showed how to replace the shell when a button goes. Every man and his dog has jumped on the flip keys but no one shows how to replace the shell on a NON flip key
Hi Ron, I started to make this video, but it is nor straight forward. The circhuit board is moulded into the case, it takes about 20 mins with a hot soldering iron to gently melt the case from around the electronics, so it;s not really a home project
@@TheCarKeyMan Hi I was not sure whether it was moulded in or glued. I have been an electronics engineer for many years so quite proficient with the soldering iron. I would suggest that an old penknife heated over a gas flame would do a better job than a soldering iron. I would also warn people who intend to go down this route to handle a new case before they buy one. I had one bought for me. The one bought for me was totally rigid with absolutely no movement on the buttons and would never have worked.. The only way it would have been of any use would be to have the stem cut by a locksmith and use it to unlock the door should you accidentally lock your other key inside the car
I have two keys, a folding and a blade one. Never managed to remove electronics from the blade one. Seems like I need to cut it open or melt it, but there's no safe way to do it. Whoever makes this kind of key, needs you to buy the whole thing for a profit. That's awful.
Hi, yes this is a problem with these keys, there's no simple way in like there is with the flip keys. Are you in the UK?
@@TheCarKeyMan nope, got it from Italy a few years back. Had two keys, now I'm left with one :) But they're similar to what you've shown.
The battery needed changing on my son's non-folding spare key and I found I was able to lever it open with the sharp and reasonably strong point of a corn-on-the cob holder... but absolutely make sure you don't slip!
Hi, Please could you tell me how do you dissemble this type of key to transfer the electronics to a flip key?
Hi Les. Ok, so there are a couple of issues here.
Firstly, with this type of key, we haven't found an easy way to open them They don't just 'snap' open like the flip keys. When we've removed the circuit board, it's been a slow job of melting the plastic with a soldering iron and carefully splitting the case.
So it's possible but a bit of a pain.
Next, when we tried to put the circuit board into a standard flip key case, ( so basically convert it to a flip key) it didn't fit!
There may be a special case available on eBay, but we're not sure, sorry.
Is it your only key?
Hey there, no it's actually my wife's car and it came supplied with one flip key and one fixed blade key. Thank you for your help, but if it's too much of a pain I will leave it 'as is'.
Hello, I hope you can help, I have this exact key as my spare but the case broke. So I purchased a new case and I now need to transfer the blade and circuit board over to the new key. Could you tell me the best way to do this? Thanks
Life Of Danny - I'm afraid I have no clue how to get this apart without the possibility of damaging the electronics. As The Car Key Man has explained, the case for these keys is moulded & cannot easily be disassembled. You would need to cut/use heat etc to separate the two halves to get the electronics out.
@@dannysmediachanneldanny2317 Hi, ok so the blade is moulded into the old case. So unfortunately you'll need to get the new blade cut. I'd get it cut before you start opening the old key. Hope this helps