Mine still bring the option of serial number after the username and the password if i fill in as admin doesn't work but if i fill as root it work and i can't change the ports how can you help
Hello, I'm using b312-926 huawei which has wifi and Lan. I would like to connect my laptop to the huawei device through LAN and use internet and not via wifi. How to do it?
@@sirha87tech thanks for reply. I have connected my laptop to modem via ethernet (LAN) cable. But still facing the problem. I would like to have your email/WhatsApp number. So I can solve my problem. Please I need help in this regard. I'm ready to pay you for your service.
Hello, my router logs in to telecomadmin after I reset it but after I finish my settings and log out it does not log in again. How do I make it log in without having to reset it each time?
Hi there, Can i use my hg8145v5 as wireless range extender/repeater with my airtel xtream fiber .. Plz suggest the steps to follow on hg8145v5 Huawei router
1. Try to press the reset button before you power it on. Hold for a few seconds and then release 2. You can use the default login on the plate at the back of the router.
My Huawei EG8145X6-10 disconnects every 15 minutes for one minute from Converge ICT Philippines. Any chance to change the settings or upgrade the firmware to fix this problem?
would you please help me how to access to the router as an administrator I tried telecomadmin/admintelecom and root/admin but I got an error login is there any way to decrypt hw_ctree.xml even If I have to pay for this help my device is hg8240t5
Good job finally you are back missed you
I'm back. More greater tips to come.
Mine still bring the option of serial number after the username and the password if i fill in as admin doesn't work but if i fill as root it work and i can't change the ports how can you help
Reset the router to factory default the it will work
Is there a way to use this router as a wireless extender for another Wifi network?
the new button don show of to fix that😢
Exactly my issue
@@sam71802 same thing, have u a solution?
How can i fix ti?
How to fix it
You have this "New" button under WAN Configuration. I don't have that option showing up, what could be the reason?
Me too
Rest and try again it work for me
Reset and use the administrator login
Same issue
you are logged in with less permission. you need to log in as admin
Hello, in the wan confirmation panel of my router the New button does not appear, do you know what I can be doing to solve this? 3:33
Did you login as admin user. Using the root login will not work
How?
Enter the router configuration with the credentials:
- username: telecomadmin
- Password: admintelecom
User and Password : telecomadmin is root
I can't see the new button. What do you mean? Explain to me as if I am a kid bro
In my router the layer port in LAN is not showing how can i enable/disable the lan ports ?
Enter the router configuration with the credentials:
- username: telecomadmin
- Password: admintelecom
Question if I'm using a DSL to wan connector would this method work??? I'm using the Huawei hg8245w5
It works perfectly. Give it a go
Thanks so much for this. It has perfectly worked for me.
Nice bro. I'm happy to help
Plz tell me how i can use my Static 4 ip pool to in this ONT
There is wan settings option which you can set the router to static.
already set at Static IP now i want to access my firewall@@sirha87tech
hello, do u know how to disable SIP ALG? i need that to be disabled for work 😩 thank you!
I can't find new button
Use the logins in the decription
×2
Hello, I'm using b312-926 huawei which has wifi and Lan. I would like to connect my laptop to the huawei device through LAN and use internet and not via wifi. How to do it?
Use a patch cable to connect directly
@@sirha87tech thanks for reply.
I have connected my laptop to modem via ethernet (LAN) cable. But still facing the problem. I would like to have your email/WhatsApp number. So I can solve my problem.
Please I need help in this regard.
I'm ready to pay you for your service.
Plz help me the router setup
4fe +2pots+1USB+WiFi Port Huawei Hg8245c
Hello, my router logs in to telecomadmin after I reset it but after I finish my settings and log out it does not log in again. How do I make it log in without having to reset it each time?
Use the new ip you set and change the static address on your computer
@@sirha87tech HG8245C setting please
Big up...hope you are now getting connected..yey
Thanks for the tutorial bro
Anytime you are welcomed
Usb is for storage or can share internet?
Hi there,
Can i use my hg8145v5 as wireless range extender/repeater with my airtel xtream fiber ..
Plz suggest the steps to follow on hg8145v5 Huawei router
What is admin log in
What is admin log in
username:telecomadmin
Password: admintelecom
Thanks. I reset my ONT and can´t find the ip address of the rj45 port. This help a lot.
192.168.100.1 thats the default
Huawei echolife 8145c5 solutions????
What's the problem?
@@sirha87tech huawei echolife hs8145c5 lan port wan option not available help me
On HW HG8245W5 this option is not anable to Add new WAN
Login as admin user and you will have the option. It is disabled for the root user
@@sirha87tech how to login as admin user
The same prblm
this option is not anable to Add new WAN
The same problem
Can I open IPV6?
can you please share ths new fimware file? No Upstream port option
Upstream port is available only if you use admin privileges to login. Username: telecomadmin
Password: admintelecom
@@sirha87tech says incorrect username or password only the root username opens?
Did my isp make it that way??
When we plug wan wire into lan wire it will works or not becpuse in my router there is no any wan port to insert wire
Whats your router make ? Plug to the port set as upstream port
Huawei EG8141A5 solution plz
Questions
How can i reset router huwei echolife eg8141a5??
I don't know my password
I have tried to reset via reset botton..
But its failed to reset
1. Try to press the reset button before you power it on. Hold for a few seconds and then release
2. You can use the default login on the plate at the back of the router.
Thank you so much! ;)
You are welcomed
sir pano po gagawin ung nadisable po mismo ung wlan nya ung dpo masearch ung wifi name
Bro WAN configuration mein new wan show nhi kr rha please help bhai
English please
Can you share the Configuración File? Please
Can you enable 5GHz?
Yes. You just change the basic network setting 5g
HG8245C setting please
How do you get the new code
which code ?
thank for your share
Welcome
salamt sir sa tut malaking tulong po
My router does not come with the wan function, how do I activate it?
Use administrator logins
Also tell me how i Access this modem remotely anywhere from internet from static public ip.
It work thx
My pleasure
when i try and change the upstream config it didn't apply it, any solution?
Did you disable vlan ? Also make sure you use the port you set as upstream. Recheck your configuration again.
How put user name and password?
Can you please provide latest firmware file of this router?
My Huawei EG8145X6-10 disconnects every 15 minutes for one minute from Converge ICT Philippines. Any chance to change the settings or upgrade the firmware to fix this problem?
Try to update the firmware
@@sirha87tech works fine now. Converge got their act together
would you please help me how to access to the router as an administrator I tried telecomadmin/admintelecom and root/admin but I got an error login is there any way to decrypt hw_ctree.xml even If I have to pay for this help my device is hg8240t5
You have to reset the router first before you are able to log in as an admin. It should work superbly
Pahelp po ni reset po yung router namin tapos nawalan po kami internet ang nalabas po" port1 voice network connection is abnormal" ano po pwede gawin
same problem na solve niyo na po ba?
New option is not there
username:telecomadmin
Password: admintelecom
can you please share ths new fimware file
Google detects it as virus. Just follow the steps and you wont need the firmware update
No Upstream port option in HG8245H.
Any solution?
check the advanced settings well
Boss patulong naman walang upstream port yong sakin?
use telecomadmin login for you to be able to access the upstream port
Thanks a lot
Not upstream port
Your model number is different then
Can you provide its firmware file
I think Huawei does automatic firmware upgrade online. Manual update is a rare case
Huawei 8240T5 setup now
The interface is generally the same. Reset to factory default then try the process
huawei echolife hg8245w5 router to router connect
Same settings apply
new here pwd mag ask para san to
Whats your default admin and password?
Username telecomadmin
Password admintelecom
@@sirha87tech not working....any other ??
@@sirha87techit doesn’t work.
i want to open a port to a game called minecraft and i cant do it help
You need to configure port forwarding
@@sirha87tech i already made that but it still doesnt work
WHAT IS THE PASSWORD FOR THAT USERNAME?
username:telecomadmin
Password: admintelecom
Good job bro
Thank you so much 😀
User id - telecomadmin
Plz tell password - ????
admintelecom
@@sirha87tech thanks Bro
@@sirha87techwhat if username n password still incorrect after resetting? What can I do next?
@@sirha87tech что - то не подходят, пишет неправильный пароль или логин?
I can't get the new button
username telecomadmin password admintelecom
×2
ye ni lg raha bhai@@sirha87tech