Worlds Biggest RC Car gets GIANT Engine (5x power)
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- We fit a giant engine into the worlds biggest and baddest Rc car - the Primal RC Game Over Monster Truck.
🚗Win some one of my cars raffall.com/ke...
Buy Game Over Truck Here primalrc.com/k...
Taylor Engine www.taylorrc.c...
Perfect Pass Servos www.perfectpas...
Yes Mate Channel / @yesmatercmann
🎓Kevin's 11 steps to work from home - eBay Powerseller Blueprint kevtalbot.clic...
👕Game Over Clothing teespring.com/...
🚗My RC TH-cam Channel - / @kevintalbotrc
🧡INSTAGRAM / talbotkev
❤️TICTOK / kevtalbot
💙FACEBOOK / kevintalbotvideos
💚RUMBLE rumble.com/use...
🚗Kev's RC Basher School - kevin-talbot.t...
This is my fun channel, you'll find everything hobby related, rc cars, monster trucks, supercars, destruction and a bit of business stuff :) Most videos are RC Cars, business, Amazon FBA, eBay, Monster truck, Cars, insurance, cryptocurrency and other topics.
subscribe!!
#Kevintalbot #rccars #rc
🚗Win some one of my cars raffall.com/kevin_talbot
I have 20 years experience tuning 2 stroke engines. The key is to start with the base tune given by the manufacturer. From there you would adjust the idle first as the low side will affect the high side tune. After you get it to idle nicely without stalling, hold it in the air/ take the wheels off, hold wide open throttle and adjust the high side rich until you hear the engine change rpm (starting to bogg). Then adjust back lean just to the point where it picks back up. That's the sweet spot. It's also a good idea to mix your fuel a little rich (oil) as the only down side is a bit of a mess, not enough and you will burn up the engine. Same if you run the engine with too lean fuel settings.
@@Howwegrowweed this right here. Patience is key as well for proper low side tuning, it needs to sit at idle for a bit, listen for a change in rpm with the throttle in the closed position, then apply WOT. If it quits right away, it’s too lean, stumbles then revs-too rich. Get the throttle response correct then tune high needle.
717miaka
Yes exactly what you said and I was gonna add that you gotta make sure to tune it with the Air filter on. Alot of 2 strokes run different once you throw the Air filter on.
This right here 1000%
That's how I learned how to tune gopeds. Works really well and rips way better.
Love the cat getting involved 😅 typical orange cat🙄😂🤣
Yep our ginge marbled bengal has to be involved in everything 😂
"the cat distribution system" strikes again....
We use to have a orange cat 🐈 that greeted everyone in my neighborhood. It was my neighbors cat but I would yell “I need to speak with Sampson!” And he come running lol
Hilarious 😂😂😂
Yeah we all know that fur color determines personality in ALL animals, right?
that cat is too adorable man, ginge is a keeper
Kevin, take one of the old raminators and add a mower deck on it. Baddest lawnmower on earth.
I like the sound of that idea
He could put the helicopter blades on the bottom too
Honey kev shrunk the kids
@@YoBoyRolling_slugtop and bottom, make a drone that can mow the yard 😅
Me ples
A cats purr is soooooo soothing.
Awesome Kevin cant wait to see more of this one!!
Hay Kev, you need to find a way to supercharge or turbo these engines, even the small scale turbo / supercharger would be a awsome project that could filter into other rc projects 😅.
I love the effort that you put into these amazing videos
you have alot of badass hobbies
I think that cat has claimed you as its own
oh no!
Yup. Kevin your now his pet and he's now ypur owner. There's no going back lol
124enzo@
22357e não
Xcvhv@234675/
Love the videos keep up the good work plus I watch you from Georgia usa
We got hooked up with him in the states here and got his 40cc his 71cc supreme and the bad boy diablo 88cc that last engine was insane. Taylor really knows 2 strokes. Hes a super super friendly guy good business man also. I wonder if his twin is out yet or not. I've never heard another rc engine perform like his. Wait till that things up on the pipe thats when she will blow your mind. Awesome build.
I bought my 1 year old his first rc for $20 and he loves it. I cant wait to work up to a raminator over the next 15 years
Wow, I learned so much about road safety from this!
Just my opinion: I have broken in loads of engines, and there is a break-in period before it levels out before you "fine tune" the carb. Run rich for 4 or 5 tanks (lots of white exhaust). It is VERY important that the engine stays cool during these 5 ranks. Also, during this break-in period, you should not jam the throttle. No more than 50% at most. Tank 6, lean out the carb 1/4, turn for another 1/4 tank, and repeat. Once the engine engages the power band within 1.5 - 2 seconds, then it's close. Open the needle (rich), just a smidgen. This will allow the engine to idle nice and low. You still should have some good smoke when punching the throttle. Less smoke = HEAT, amb that will BOG the engine when you slam the throttle. I would LOVE to have one of these. So cool, and I love your channel, Kev!
He does not care
He just puts the hammer down 😁
Love it ❤ you do some really good stuff mate I enjoy watching every video I see you do. Cheers 🥂🍻
It's sounds so good with silencer, sounds like a 125 dirtbike
Kev, that is one beautiful RC Monster truck! 😮
Love the cat !
After seeing you tear into those boxes I'm not surprised cats started showing up.
lol
No one enjoys a proper unboxing like a kitty cat😮
Fantastic 👍
Badass!!! You need a foam filled fuel cell to keep the fuel flow constant during negative G’s that pulls fuel away from the fuel line outlet.
Good luck to everyone.
Next time you paint them use engine paint, then bake the parts.
Starting with warm parts helps as well.
Several coats then in an oven for 30 mins at 250f, repeat twice more.
The FDS has struck again.
Feline Distribution System.
Cute cat
Hard to beat the sound of a nice 2 stroke, awesome build🤟🏼
Put a 100cc in to it 👍 with hardened gears and 2 speed gearbox
Hi Kevin #1 Don't use that octane boost untile engine is set up correctly. Also your carb is to lean also
#2 check all carb gaskets for air leaks.#3 I also noticed your exhaust pipe is bouncing around to much you will break your header off if you keep it that way. Install a rear exhaust stinger mount to fix that issue. Happy r/c my friend.
BOOM!!
I remember being excited for my upgrade from a .12 to .15 nitro engine back in the day...a truck/engine this size wouldve made my head explode lol
Same here man when I got that upgrade for the og stampede 27 or 30 year ago 😂 my head would of popped too even seeing a rc this big
@@xwixsticky Same time frame as me, except I had the Traxxas Nitro Buggy...I remember wishing I had gotten the Stampede lol
You rock Kevin! Lean or rich your build is still super cool!!!
That spray painting hurt my soul.
I remember when I was a full grown man and didn’t know how to spray paint something
Primer?! Even operations that put MIL Spec, high solids urethane paint on military use metals either forget, or do not know to use primer. Even though it is both on the purchase order and the spec drawing. I think the vendor does not speak English. Shocker. Paint peeled off, and we got some angry emails. CofC said they used primer. Can primer be completely clear?!
to get less chips is used 2 coats primer sand each coat get smooth finished , wait day for primer set hard sand then add color i do 2 coats let dry a day sand then add couple coat of clear you set if want last long time if don't add clear it peel off every time hit sumthing.
Gaaaaaaarfieeeeeeeeld!!!!!!!!!!!!!!!!!! :)
BOOM
Like the black finish looks so much better. Sounds incredible
More cc means more power 😂😂🎉🎉
Hey Rob, give us some fist-pumping action!! 👊
Ти робиш дуже круті іграшки ! Красива!
Use a piece of heat shrink tubing on the hub pins.🤔😉 Also, engine should be run rich for a full tank of gas before trying to tune.
Freaking awesome truck man.
i love the cat! 😂❤
Kevs turned in to the crazy cat lady 😂😂
the places you have access to to drive your rc cars is crazy
Kev’s new videos always make me want to go bashing
lets go bashing next weekend or something, what's holding us back? apart from the rain.
Amazing video
You have to mix the fuel perfectly! If not mixed right. It will do everything you are having problems with!! Love the truck.
Grats on the new cat!
an idea for your tuning, by the way it cuts at higher rpm , it could be worth checking that the fuel tank is able to supply the fuel consistently. perhaps the breather valve / hose isn't allowing the pressure in the tank to be even or a vacuum when the engine requires more fuel it is having too much effort to suck it from the tank? at low rpm or starting the fuel can be drawn slowly but higher demand is causing a vacuum and making it lean and cut out.
and with the larger engine maybe the fuel line isn't big enough?
@@muskokamike127 Great point. Also agree with above comment regarding vacuum effects choking engine at higher rpm's.
This is tthe ansswer!!!! Fuel flow!!!!!
That thing looks like it has more power than most electric ones. I love that combo with the silencer. Have a guy come tune it perfect, n it'll be great.
We need a scale monster truck arena for it !!!
yes!! when I get some land one day
Can't believe we got to chat !!! Me and my girlfriend love your videos.
@@michaeltaylor1985lucky man,I have had a chat like this with kev back in 2022 or maybe in 2021❤😘
@Indiantanker583 me too have chat with kevin talbot 🎉 Love from sri lanka ❤🇱🇰😁🎉
Love it, Kev!
3:55 Hey Kev, if you are going to paint aluminum, you need to use an iron oxide primer and then anything will stick to it.
lmao get ready for the sandblaster haha
Is nice😍😍
AGF makes Raz Shiffren's perfect pass servo
That just looks fun all around
My boss just acquired some widows late husbands rc aircraft collection.
It's insane we have enough planes to fill the basement completely at work.
About 15 1.5 m wingspan planes.
Various engines.
There's many Petro powered but also several brushless.
Boxes of servos the whole lifetime of his hobby.
It's an amazing find.
All free just wanted it to go somewhere besides just the family grabbing up his stuff to make a quick sale.
We plan on getting what we can flying or at least in the hands of some one that will enjoy it.
Those cats are plotting something.. run while you can Kev
They probaly going to gang up on him and take over.. 😁😋
Keep up the great RC work Kevin. You give us small RC youtubers something to strive for! 🤙
Obviously a nice chill guy letting ginge climb on your Lambo.
What a sweet hobby...lucky man !
I don't think you understand how happy I would be if a friendly cat just showed up at my house and came on in and kept coming back like that
Love watching these giant truck videos!
Sounds like tank is air suction locking .. fuel starvation .. add a snappy breather or drill a small hole in the filler cap
Yeah, I would suggest also checking all the fuel lines pick up etc.
Aww cute cat mine ran away
Forget the truck, that cat had all the personality
Epic video kev. For the running problem on a normal car I would always check simple things first, look for air leaks between the carb and the cylinder head and start with the factory settings again.
Congratulations, you're now owned by that ginger cat.
And not just what paint you use but how you paint makes a big difference in durability and thick coats down first thing is not going to help with the durability or the curing process laying down a thin coat letting it dry and then doing multiple coats over the top of it is the way to go and if you really want it to stay on their good find an oven that you can put the painted Parts in and turn it to about 350 or 400 and let it sit for 25 to 35 minutes and then take it out and let it cool down I'm leaving the axle together and painting it is going to look good until the first time you have to take it apart and then it is going to look horrendous you might get away with running a razor blade around every scene before you pull it apart but there's a pretty good chance of it chipping off
I love your videos big fan in sud
Bro casually had like 10 Raminators
What a beast 💪
"Looks professional ".... after spraying it like an 8 yr old. 😂😂
Exactly
It’s a two stroke just hold it wide open bro 🤙🏽
Kevs cat sanctuary 😂😂😂🐈🐈⬛
oh god!!!
@KevinTalbotTV keep up the amazing work you will always be the my favorite rc TH-camr🛻☄️
THAT'S MASSIVE! MORE POWER!!
it's about time this got some more BHP👍👍
That's so weird how you guys drive on the wrong side of the road (cheers from America)
Do I hear some faint comment from one of the colonies? 🤣
Who says that you are driving on the correct side of the road? Typical American...
@@_Jester_when the Brit doesn’t get the joke 😳
Start with the high end needle. Then tune the low end and set the idle. Either needle changed will affect the other.
Start at stock settings and tune high then low
Cat claws on the Lamborghini's paint work. Anxiety overload 🤢
Eh, cats don't use their claws all the time!
@@polarlicht4758you're that person 🙄👍
@@johnnysrcchannel7472Huh? I am a person, yes
@@johnnysrcchannel7472They're a person that knows cats have retractable claws?
@@Scarlet_Soul oh another, welcome
Folks a star is born!! 🎉 Ginj!! 🐈
Kevin, you should have fed that cat. He looks very hungry and like a very good boy.
It’s not my cat to feed. He must have a home, he’s too cared for not to
Every cat that my family has ever owned just showed up like this. They were super friendly and good with kids. They all walked in their house over the years and processed to stay for the next 12+ 😂. I sware cats know where the good homes are 🤷♂️
@@KevinTalbotTVif that's your new place it may have been abandoned by the previous resident. You have the cat door and now the cat...
@@bockjess I asked them they said they had a small dog, the cat used to come in the garden but not come in the house. He must have an owner, hes well groomed and turns up smelling of perfume. And just as I'm typing this, he turned up!! 🤣
@@KevinTalbotTV he is yours now. You have been claimed.
Great job !!! Ready for the next vid 👏👏👏 very entertaining
Kev you need to use an etching primer on aluminum to get the paint to stick good. Without it it'll just scratch off easy. But, it does look better black👍
apparently if its anodised you dont have to, but its scratching off anyway so probably will end up anodising it all
@@KevinTalbotTV oh yeah, for sure if it's anodized you don't have to prime anything. I was just giving you some advice on future painting on aluminum. But I understand the hurry to just make it black and go out and rip! Love the truck man! Sick! That small muffler after the expansion pipe makes a lot of difference on video. Is it a lot quieter in person as well?
He is saying, use etching primer before you spray! It will give the spray can something to bind with.
Project world’s fastest primal raminator?
Yes Mate is doing that!
@@KevinTalbotTV yes indeed very keen for his next videos on that build
How to make a fast Raminator?…………buy it a plane ticket😂
Loved the cat 😊 The MT too of course 👍🤝
For how expensive this platform is the chassis and suspension seems to not be up to the task of doing much of anything. I’d be pretty freaking pissed off if I built one of these and it broke every single time I took it out. Blokes didn’t even get the shock tuning right, what a joke
Love the Cat content.
Awesome RC MT 👍⛽️ I need one !
nice
I really like when people do the dual shock conversion with one spring and rake it so the front is slightly lower like a racing monster truck
KEVIN!!!!!
That was hilarious when you said "what we really should be doing lol is looking at the instructions lol 😂 🤣!!!!
That's a huge RC truck. God bless
❤ love the vids Kev ❤
Find someone who uses chainsaws/strimmer etc - same type of carb. A good tune makes all the difference.
That noise is awesome
The detail during the build was awesome Kevin.
Kev you seem like your taking all these comments a bit lighter and i love that so much dont let all these people stress you out! Stay Humble but looks what you have created!! a whole community!!! its such an amazing thing to see!! God Bless Us All LOve ya KEV!!
Hahaha when it's in the back of the car it's massive
You know what... Call Mike Taylor ! You bought a ton of engines of him... He can help u tune it 😀
That’s a monster!!!
Kev! Do a talbot test on the Traxxas nitro slash!
Watching your video since I was three and now I’m 15 today🎉