Replacing NutriBullet Motor Gear
ฝัง
- เผยแพร่เมื่อ 7 ก.ค. 2020
- How to replace the motor gear and rubber gear on NutriBullet
Rubber Gears and base Top Gears: amzn.to/3bl6DYf
Motor Gear: amzn.to/37uaSzU
Extractor Blade: amzn.to/3pBV6ZQ
Other: amzn.to/3tcywbV
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting PatriotMarine so I can continue to provide you with free content each week!
Excellent teacher.Compared to some of the incomprehensible repair videos,this is like from the gods of repair.
Thank you for taking the time to put this up I would.of never have guessed that was how you did it
BRILLIANT! Works a treat and simple to do. Though getting the old one off, took two of us with gentle persuasion.
Thank you for the information and tutorial. Clear, concise, good recommendations and an easy fix when you have someone giving you the step by step.
Done now and used the opportunity to give the machine a good clean. Tested and working again.
Thank You, Patriot Marine, the vise grip tip was well worth the video(it was all helpful) It's great to have your repair video! It reminds me of how my Dad would teach.... now that he's gone I have to teach myself. With your help : ) Blessing to you!
Wonderful, thanks so much. I nearly stripped the screw using too small a driver, and trying to unscrew it normally. Changed my approach to yours and sorted first time!
I have to change mine now is hard for one person but i will try I thought was easier way Thank you for showing how to do it very help full. Good video Thank you
Thank you! I kept trying to do lefty loosey to remove the old gear piece so thank you for this!
Thanks for the information. It helped me a lot!
Thanks. We followed your instructions and it worked.
I tried to use the screwdriver but it stripped so grabbed a cloth and put it over the fan to hold. I didn’t grip too tight so it wouldn’t break but that made it much easier. The video was great thank you.
You saved me from throwing this blender out of the window. thank you
Ditto - this worked for me too
Thanks - worked for me!
Thank so much saved me a lot of money
I found it impossible to do via the screw, my advice is to take the screws out that are under the 3 rubber stands in the top. That gives you just enough slack to pull the internal part up through the body and place the internals on it's side, then you can access the shaft behind the fan with a wrench or pliers and then the top nut comes off fairly easily.
Excellent, thank you
Thank you. This worked. 😊
Doing God's work. Excellent video.
I've got a nutribullet 1000 series and when I open the bottom it looks completely different to this. I dont know what to do. Help?
Good video
I have a question to ask you please how do I use the vice grip wrench and a standardriver to take out the Lasts scre driver.
?
@@nicholasmarkin2385 I don't understand your question.
@@PatriotMarine my question to ask u is how do l unscrew the flat head properly from the 900 series Nutri bullet?
How do l re order the standard motor screw on Amazon for the NutriBullet 900 series as well 👍 separately against mass spots?Please,gm
Don't know what you mean, see Links under video
I cannot get the brass ring off. 😭😭 Any / tips welcomed
hi sir,
i have nutri bullet series 600 in my jar base i have remove old bearing two number but b4 bearing changed rubber sealed i want to replaced did u have part no of this model any idea plz update
thanks swami
No I don't.
I can not get the bottom flat head screw off. I ve tried vice grips as well as 3 different strong men who have tried. It's not coming off. Has anyone ran into this? (Yes, I'm turning to the right/clockwise). Since the screw won't come out is it just $100 piece of trash now? :/
since it's been
From where do you get replacement part?? Please
The Links are below the video..
I missed the part where you got the plastic gear out of the inside.
Mine was stuck pretty hard, but some wd40 solved that
dude you skipped the step actually putting it back in, I'm having trouble sliding it back in
This completely didn't work for me. I spent a good $40 on the two beefiest locking pliers I could find and it was literally impossible to remove the nut. I ended up bashing the whole thing with a hammer like a mad man after spending all day trying to fix it. I hate nutribullet.
Hey buddy if you're going do video learn the left hand thread that's why you turn it backwards don't need to go through all the other mumbo-jumbo it's left hand thread it's not righty tighty lefty Loosey it's righty Loosey Lefty tighty it's the left hand thread
WD 40 sprayed on, a few light taps, screwdriver on base. Came off using mole grips.😊