An easy way to get the sticker off, is to use the heat gun under the sticker. Another words heat the sticker up a little bit, grab a piece and get it moving and then put the heat gun underneath the sticker and it’ll come off real easy. 👍👍👍😎🇨🇱 everything is looking nice 👍
I love that Eric is your right hand man now, Daryll and Daryll Jr was fun to watch because they were both big kids but I feel like it means a lot more for Eric being a young man. And also Eric is great for content, really nice guy, full of life, and funny!
@@k-town8163 I was just saying that he has something better than Darryl..if you wanted Daryll to not be brought up why would you reply about him.. and besides who are you to say to not bring him up? Do you run victory or TH-cam? Didn't think so
@@FWtravels Them messing up cost Ryan money... It maybe funny the first few times... but after awhile I feel more and more sorry for Ryan the more Darryl messes up. Like, Common man.
@@FWtravels it hasn't got boring, yeah it was fun to watch the destroyer but in my opinion Eric is better. And besides the other guy is right, he cost to much money messing stuff up.
The crazy thing about Ryan is, I've never worked a trade in my life (I've always been in the IT field), but I would drop everything and go work for him in a heartbeat. It's insanely hard to find a boss like that, that cares about his employees and sticks to his values. It takes a special type of person to make me wish I could just change my whole career focus to pouring concrete!
The snow plow life seems rough. Especially with the pop up snowstorms, how it is on equipment and the terrible sleep schedule. I give you props! And To all the small businesses and I’m impressed with you’re work ethic. I’m a machinist so i have a temperature controlled shop and my tool relatively close. It’s always cool to see the “behind the scenes” of other trades!
The plow life is rough, but it pays well if you’re in the right gig. Sometimes pays so well that some guys don’t need to work during the warm season because they made so much off of snow.
ryan i've been watching for about a year now and i absolutely love your videos they get better and better every single one keep them coming never get enough of watching your videos!!!!
Women's nail polish remover and a cotton swab. Soak the pad, rub it all over the sticker and slowly peel it off. Done. I used to remove decals all the time back in the day.
Keep the DEF full, if the sensors are exposed they get corroded by the urea in the DEF, and GM has (or had) a huge delay on DEF tank level sensors. If the sensor goes bad you’ll be in limp mode and can only go 55mph (some trucks are 5mph in limp mode)
Tip with exhaust fluid. Don't let it get below half tank! You can also top it off at the same pumps semi trucks get it from. It's like $5 a gallon vs buying jugs that's $20
Because of videos like yours, I hardly watch TV anymore. You show the real thing with no phony baloney. I like seeing what you do without fake drama. And I learn a lot also. God Bless you and stay safe.
Ryan, get an eraser wheel for your drill or mini impact nut driver. It will make getting the adhesive and decals off much easier when used after the heat gun.
You are such an inspiration. Made me go out and do some gardening before it gets too hot. 🥵 It’s going to be 33 for you 92, with 62% humidity here in Australia 💎🙏💕🐨
They are called Automated Screen Printing Machines that one looks like and M&R model. My pops has been in the business for over 30 years glad to see you show this and appreciate the work
I don't know how you do it Ryan, but you've got the heart of a lion I swear. You just keep pushing forward no matter the circumstance and that's a rare quality these days. An inspiration to many for sure sir. Wishing you and your family well!
You can get a rubber wheel attachment for your drill too take stickers off without hurting paint! Auto body supply shop we use them all the time don’t use in plastic but for paint it’s wonderful!
I had to shift a couple of those big embroidery machines with a crane truck a few years back and I suggested to the owner that it would be best to remove all the cotton or at least put plastic over it, well they wanted to do neither, so I carried it about 10 Klm to their new premises without cover when it arrived there was a trail of cotton behind me about a kilometre long so they had to rethread the whole machine again not very happy. Told you so, Oh well. A couple of years later had to shift them again, Ha HA they learnt their lesson, well wrapped this time, no problem
Good morning sunshine! I hate you dont get much sleep Ryan! Work work work! Take care of yourself please! Enjoyed this video! Go get some rest now! Much love from Henderson Ga
some of the coolest looking features in custom work comes directly after hearing the artist say "and this was the best I could get it but I'm still not entirely happy with the way it came out" as we stand there with our jaws on the floor immediately thinking about more paid work for them to do
The vape shop next the ace hardware might have a needle nose bottle you can put some alcohol and soak the edges of the vinyl and let it sit a few mins making it a lot easier to remove.
I was out plowing that night also. We just got everything done and on my way home it started snowing again. I was very frustrated. Lucky we had warm temperatures that Saturday and it all melted.
For the next time you take the stickers off use a steamer they will come right off, I own a window tint company and that’s what we use to get old tint off
I enjoy watching the snow clearing footage that you've been putting up. It's probably boring for a lot of people, but I enjoy it! I can't wait for Spring to peek it's head out and your weather to warm up so we can get back to seeing normal jobs again!
If I wasn’t in Canada I would so apply to work for you your business and workers inspire me to love concrete and snow even more keep up the hard work stay on that easy money 🤘🏻
Jeez, Eric peeling those decals off was giving me flashbacks to the time I bought a used ambulance that still had all the vinyl decals on it... Took me and a friend like 16 hours with heat guns and solvent to peel it and get all the adhesive off.
All the form truck needs now is a new grill. It's got a nice new wrap, new tool boxes, fresh black paint in several areas, but the big broken chunk missing from the grill is an eye sore and it stands out.
I would consider adding door sensors to the new compartments hooked to an alarm in the truck cab. Prevents employees from driving away with an open door. They are common on fire apparatus most are as simple an a magnetic type proximity switch.
You know how you say it may be boring to watch you removing the snow, to me it's Therapeutic, like watching someone mowing. It's the final result that it cool. Thank You for hours & hours of entertainment Ryan. God Bless
Have to agree when it rains I don't sit in the house I go outside under my car port and just sit and listen to the rain, it just calms you when you have had a stressful day or week.
No trash to take out at the beginning of the video sure was a change to the beginning of the video! haha keep up the great work ryan love the videos as always!!
Don’t stress it Ryan. We Minnesotans are struggling with these snow events too. I have been out plowing late nights into mornings because of the on/off snow events 😂
it just doesn’t stop🤣 im close to minneapolis and we’re supposed to get another 8-12 inches today through friday. i swear this is the most snow season we have had for decades😂
An easy way to get the sticker off, is to use the heat gun under the sticker. Another words heat the sticker up a little bit, grab a piece and get it moving and then put the heat gun underneath the sticker and it’ll come off real easy.
👍👍👍😎🇨🇱 everything is looking nice 👍
Wall paper steamer is your friend for removing decals 👍👍👍
I don't think Eric knows you were calling his truck rusty 🤣
💯🤣Way over his head. You could see the edit when Ryan was probably explaining what he was trying to tell him.🤣🤣
The airplane definitely flew right over on that one 😂😂
I think a lot of the viewers didn't catch that too! hahaha
He doesn't catch a lot if you watch his video`s. 😂
We call def Obama juice
I love that Eric is your right hand man now, Daryll and Daryll Jr was fun to watch because they were both big kids but I feel like it means a lot more for Eric being a young man. And also Eric is great for content, really nice guy, full of life, and funny!
Bro stop bringing Daryl up😂
@@k-town8163 I was just saying that he has something better than Darryl..if you wanted Daryll to not be brought up why would you reply about him.. and besides who are you to say to not bring him up? Do you run victory or TH-cam? Didn't think so
A lot of us only watched to see Darryl mess up. It’s gotten boring now.
@@FWtravels Them messing up cost Ryan money... It maybe funny the first few times... but after awhile I feel more and more sorry for Ryan the more Darryl messes up. Like, Common man.
@@FWtravels it hasn't got boring, yeah it was fun to watch the destroyer but in my opinion Eric is better. And besides the other guy is right, he cost to much money messing stuff up.
The only man to be upset wife took out the garbage lol, a Great video keep them coming.
Can't express how much I appreciate your videos thank you
Its awesome how you matched all the vehicles. You where already professional looking. But now? Maaaan!!
Been missing the videos so much. So glad to see another upload!! Hope you and everyone else has a great day!
Eric's a good guy, love working with people like him. Just doing his best
Thanks for the video 👍
The wrap job on the form truck looks awesome, the black line was a nice touch!
Your wife saying sorry for taking the trash out is crazy Ryan 😂
The crazy thing about Ryan is, I've never worked a trade in my life (I've always been in the IT field), but I would drop everything and go work for him in a heartbeat. It's insanely hard to find a boss like that, that cares about his employees and sticks to his values. It takes a special type of person to make me wish I could just change my whole career focus to pouring concrete!
its unfortunate bosses like him get taken advantage of
Daryl could've gotten that box in with one shot with the skid steer... 🤣
Brilliant people love the videos thank you ♥️👀👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Ryan it isn't life, its business, that's why you the man!!! Easy Money!!!!
Ryan - they sell plastic “razor” blades. Perfect for applications like this. Vinyl/wrap/decal shops will have them. They also sell them online (18:00)
The snow plow life seems rough. Especially with the pop up snowstorms, how it is on equipment and the terrible sleep schedule. I give you props! And To all the small businesses and I’m impressed with you’re work ethic. I’m a machinist so i have a temperature controlled shop and my tool relatively close. It’s always cool to see the “behind the scenes” of other trades!
The plow life is rough, but it pays well if you’re in the right gig. Sometimes pays so well that some guys don’t need to work during the warm season because they made so much off of snow.
Truck looks amazing Ryan! Coming along for the snow removal was pretty cool. As always thanks for bringing us along with you.
Wish i lived closer. I would be your mechanic in a heartbeat.
ryan i've been watching for about a year now and i absolutely love your videos they get better and better every single one keep them coming never get enough of watching your videos!!!!
hey Eric! I'm Eric too! hey from New Hampshire!👋🤙
Women's nail polish remover and a cotton swab. Soak the pad, rub it all over the sticker and slowly peel it off. Done. I used to remove decals all the time back in the day.
Gonna snow again tomorrow for us in Ontario across from Detroit you have it again now!
Keep the DEF full, if the sensors are exposed they get corroded by the urea in the DEF, and GM has (or had) a huge delay on DEF tank level sensors. If the sensor goes bad you’ll be in limp mode and can only go 55mph (some trucks are 5mph in limp mode)
You can use a toffee wheel to get stickers off without damaging paint. Takes a little practice
Thank you for the new video. I am currently binge watching from the start. My apologies for the comments on the OLD videos.
I love all these videos. They are such a treat. Thankyou for sharing 💐💐💐
The form truck looks great!!! Slap them boxes back on and it will look complete! Be sure to have Eric and Franny clean the inside.
Tip with exhaust fluid. Don't let it get below half tank! You can also top it off at the same pumps semi trucks get it from. It's like $5 a gallon vs buying jugs that's $20
Because of videos like yours, I hardly watch TV anymore. You show the real thing with no phony baloney. I like seeing what you do without fake drama. And I learn a lot also. God Bless you and stay safe.
Ryan, get an eraser wheel for your drill or mini impact nut driver. It will make getting the adhesive and decals off much easier when used after the heat gun.
I was just going to recommend an eraser wheel and saw your comment, AGREED! they can be pricey but worth it every time you need it!
gas and a rag will get it off too
@@michaelpeterson9118 old school
Suggestion - have the crew do a weigh in and general health check on day 1 to make sure they all completed the off-season conditioning program 🤣
This would be hilarious
😂 ya mammys titsn ntime mahogany brooy 😮ahowt !!! Chickalitez! Yea 😮wahowt!🎉 Ghet Naomi mou mou ma si si!
@@ziggiesaquaticexotics8270
Why are you talking like a baby?
The form truck really looks nice. Great job to the wrap shop.
They make a decal eraser that goes on a drill. They work really really well
WE NEED MORE people like you
You are such an inspiration. Made me go out and do some gardening before it gets too hot. 🥵 It’s going to be 33 for you 92, with 62% humidity here in Australia 💎🙏💕🐨
They are called Automated Screen Printing Machines that one looks like and M&R model. My pops has been in the business for over 30 years glad to see you show this and appreciate the work
I have to hand it to you Ryan your work ethics are top shelf.
I don't know how you do it Ryan, but you've got the heart of a lion I swear. You just keep pushing forward no matter the circumstance and that's a rare quality these days. An inspiration to many for sure sir. Wishing you and your family well!
Ryan, I love watching you plow snow and salt.
yes me to I grew up in new york state been in Florida 28 years now it brings on the nostalgia
You can get a rubber wheel attachment for your drill too take stickers off without hurting paint! Auto body supply shop we use them all the time don’t use in plastic but for paint it’s wonderful!
The new hats are very nice !! The form truck looks sharpe !!!
Good morning victory family hope everyone has a great day God bless!
I'm glad the box didn't smother Eric!
I just realized something, my buddy/his family owns/used to own that shop you're renting. Spent plenty of time there building cars and hangin out!
What??? No garbage to take out
COME ON !!!!!! Lol
Cheers from Nova Scotia
I had to shift a couple of those big embroidery machines with a crane truck a few years back and I suggested to the owner that it would be best to remove all the cotton or at least put plastic over it, well they wanted to do neither, so I carried it about 10 Klm to their new premises without cover when it arrived there was a trail of cotton behind me about a kilometre long so they had to rethread the whole machine again not very happy. Told you so, Oh well. A couple of years later had to shift them again, Ha HA they learnt their lesson, well wrapped this time, no problem
Good morning sunshine! I hate you dont get much sleep Ryan! Work work work! Take care of yourself please! Enjoyed this video! Go get some rest now! Much love from Henderson Ga
some of the coolest looking features in custom work comes directly after hearing the artist say "and this was the best I could get it but I'm still not entirely happy with the way it came out" as we stand there with our jaws on the floor immediately thinking about more paid work for them to do
You still safe and warm. They beat you to the punch Ryan maybe next time
The form truck has never looked better. We need a picture of all the victory cars together
My man Daniel has been slackin on shoveling that driveway! 😁
Just so you know, DEF is highly corrosive, so if you spill some on the new truck make sure you clean it well.
The vape shop next the ace hardware might have a needle nose bottle you can put some alcohol and soak the edges of the vinyl and let it sit a few mins making it a lot easier to remove.
I like that your posts are on the wholesome end of the entertainment scale. No cursing. Kind. Family. Thanks!
They are a religious family , there isn't any foul language used in their family.
Form truck looks sick! Greetings from a big fan in Norway
Congrats Ryan on 302K subscribers! Feels like yesterday when you started the channel.
You should have given your wife a hug and said "good work".
That rust bucket joke to Eric was to funny went over his head. 😂 They need metal to stick it to 🦗🦗...
Congrats on 300k keep up the great work.
We have an automatic screen press at my school it's super nice and allows us to do a lot of shirts. We are near where Ryan is.
I was out plowing that night also. We just got everything done and on my way home it started snowing again. I was very frustrated. Lucky we had warm temperatures that Saturday and it all melted.
Thanks for the content Ryan love your videos from rockisland Illinois
I’ve never seen anyone sad because there was not trash!
For the next time you take the stickers off use a steamer they will come right off, I own a window tint company and that’s what we use to get old tint off
I enjoy watching the snow clearing footage that you've been putting up. It's probably boring for a lot of people, but I enjoy it! I can't wait for Spring to peek it's head out and your weather to warm up so we can get back to seeing normal jobs again!
The hysterical laughter is what gets me 😂😂😂
That truck looks great!!!
I think out of all your vehicles the form truck is my favorite for some reason.
I love his manual trucks but the form truck does look badass now
It's so nice to see you mentoring Eric. It will be time well invested.
Wow, that form truck is looking nice
Yessir, another upload!! Gooood morning Ryan.
Great looking hats will be getting one Friday!.
If I wasn’t in Canada I would so apply to work for you your business and workers inspire me to love concrete and snow even more keep up the hard work stay on that easy money 🤘🏻
They can pay you in the Canadian ruble
Looks great, kinda like the old Concrete Barbers hat's that were so good looking.
Best part about garbage is breaking the ice on the lid and there was plenty today
Best job ever, weather guesser !!! Predicted 2"-4" got 12". That's weather 🤷♂️
The gentleman does a brilliant job👍
Very nice work and the truck looks awesome isn’t that right Eric 😂
👍👍👍👍 that’s a wrap
MacGyver needs to put a power door opener in for you guys.
Truck looks great, subscribers are climbing crazy fast dude.
Jeez, Eric peeling those decals off was giving me flashbacks to the time I bought a used ambulance that still had all the vinyl decals on it... Took me and a friend like 16 hours with heat guns and solvent to peel it and get all the adhesive off.
"Almost done".
"This thing's really light, remember".
Ryan is fibbing today, lol.
I worked at an embroidery shop. It's pretty easy money work once you get the hang of it. We had 4 12 head machines!
All the form truck needs now is a new grill. It's got a nice new wrap, new tool boxes, fresh black paint in several areas, but the big broken chunk missing from the grill is an eye sore and it stands out.
I would consider adding door sensors to the new compartments hooked to an alarm in the truck cab. Prevents employees from driving away with an open door. They are common on fire apparatus most are as simple an a magnetic type proximity switch.
Good evening Ryan and Victory family. I was at work when you uploaded but I'm watching it now that I'm home
Gooooooood morning Ryan and victory family
The wrap looks awesome!
Man I like the black hat with Victory! Looks great!
You know how you say it may be boring to watch you removing the snow, to me it's Therapeutic, like watching someone mowing. It's the final result that it cool. Thank You for hours & hours of entertainment Ryan. God Bless
Have to agree when it rains I don't sit in the house I go outside under my car port and just sit and listen to the rain, it just calms you when you have had a stressful day or week.
Hey Ryan whats going on. Sending love from my family to your family from Terry Bob Ontario canada
No trash to take out at the beginning of the video sure was a change to the beginning of the video! haha keep up the great work ryan love the videos as always!!
I have no idea why but watching plowing is relaxing. Kind of like the sound of concrete weirdly relaxes me.
Don’t stress it Ryan. We Minnesotans are struggling with these snow events too. I have been out plowing late nights into mornings because of the on/off snow events 😂
it just doesn’t stop🤣 im close to minneapolis and we’re supposed to get another 8-12 inches today through friday. i swear this is the most snow season we have had for decades😂
And mores coming! Get ready boys!
You are one hard worker. Respect to you man ✊.
Be happy your plowing I've gone out 2 times this entire winter in South Eastern MA we haven't gotten anything for snow this year
The truck looks SWEET!
Another great video Ryan!!
Man you could use some help, long days and nights! Good work!🇺🇸