I need a many, say 9, to one, “chess” style timers. Let’s say the master sets a limit of 15 mins, and then starts a 30 second timer to start the 15 minute countdown. Once started each of the many Nodes would report back the status of what the Node is. Each Node has 2 buttons, Red and Blue. Once a coloured button is pressed, it would highlight the colour pressed at the Node via a light. It would then send this changed state back to the Master. If the opposite colour was pressed it would report this change. At the end of the 15 mins, each Node would have sent the master the time that either colour in the 15 mins was pressed, and how long it stayed that colour during that 15 mins. As an example Node A would report Blue 5:35, and Red 8:25, neutral would be 1:00. Node B might be Red 14:30… etc. Each Node could be 100-400m apart, with the Master not being central. Master would have the ability to reset the system to a ready state once the 15 mins was finished. My guess is sending the status of the Node Red, Blue or Neutral could be sent every 1 second and it wouldn’t need to be perfect. The data on the status would surely be less than 250kb
Hi sir what a great tutorial. Is it possible a ultrasonic sensor is connected to the master board and an haptic motor in the slave board will vibrate if the ultrasonic sensor(in the master) detected an object?
What is the maximum number of devices that can be controlled by a single board? Also what is the maximum number of devices that can be in the mesh network?
Hi, I have the ESP32 link installed in my Arduino IDE preferences and I have the ESP32 working. However I do NOT have the ESP32 Examples lib and therefore I don't have the ESPNow examples. Can you tell me where I can download the ESP32 lib from? BTW, Great video and super explanations.
I like your energy very inspirational, How to make a mesh-network, where devices can join the network automatically when they’re near and a device can send data to certain device via other devices if their not in direct line 😊
Hi really liked your tutorial here. I just have one question as to how can ESP 8266 be used in a mesh to send the data from one end to another with the other ESP being the repeater. Would really like your help with it as I am stuck with my project where I need to send the signal for more than 200m distance.
Running espnow on esp32 with continuous data transfer heating esp board. Are there any specific requirements to throttle up data sending rate for optimum heating??
9:58 wow that was a hot day (48C) at such a low humidity relative (27)! It would be useful to see ESPNOW central receiver to also able to connect to WiFi (as well as ESPNOW) or perhaps a serial link to another ESP module for the WiFi. I like the way you cover a lot of ground quickly just giving the relevant info - thanks.
Besides the builtin serial terminal you used. What is the other terminal you used that was displaying data in yellow? Love your videos. Keep up the good work.
I had a small doubt I will be sending data of my gas sensor to esp32 the issue that I am facing is power management, can you make video how to choose power supply for wsn with power hungery parts please
Another great explanation video. Thanks for making . Can I use esp now along with regular WiFi connection?? For example:- 3 slaves sending data to one master using Esp-Now protocol. Master device reads all data & send data using mqtt protocol on local home automation server or cloud mqtt Server.
Hello and congratulations for the tutorial. I ask you: is it possible to adapt these codes for ESP-8266? I would like to build a remote and the form factor is important to me. Thank you.
Is it possible to display various sensor data from different esp32 boards on one arduino IoT or blynk dashboard designed as one device, or integrating lets say 2 esp devices data on a single platform or dashboard?
Hi i was trying to compile the code you shared, an error messages show myData was not declared in the scope! i have try some ESP code from other also it show other error! most of the esp code don't works to me . isit my setting, library version,............... wrong? Please help me!!!!!! the error message (Compilation error: invalid conversion from 'void (*)(const uint8_t*, const uint8_t*, int)' {aka 'void (*)(const unsigned char*, const unsigned char*, int)'} to 'esp_now_recv_cb_t' {aka 'void (*)(const esp_now_recv_info*, const unsigned char*, int)'} [-fpermissive])
It would be great project to start with; if we can integrate ESP-now with Arduino IOT cloud and control/get data from multiple rooms/sensors via master ESP connected to IOT cloud.
Very inspiring video sir. I am a big fan of you. I have a project idea. I want to collect sensor data from 5 "slave" nodes and want to show those data sequentially on "master" node. Is it possible ? If possible, then guide me.
What’s the next thing you want to learn ?
1. One to many
2. Many to One
3. Two way
Or
4. ESPNOW to Internet(Blynk)
Two way
Two way, thanks for all!
Two way
Two way🙂
Many to One
Best IOT tutorial channel on youtube..😍
You're mic and camera qualities are so good. It makes the video so interesting
I need a many, say 9, to one, “chess” style timers.
Let’s say the master sets a limit of 15 mins, and then starts a 30 second timer to start the 15 minute countdown.
Once started each of the many Nodes would report back the status of what the Node is. Each Node has 2 buttons, Red and Blue. Once a coloured button is pressed, it would highlight the colour pressed at the Node via a light. It would then send this changed state back to the Master. If the opposite colour was pressed it would report this change.
At the end of the 15 mins, each Node would have sent the master the time that either colour in the 15 mins was pressed, and how long it stayed that colour during that 15 mins.
As an example Node A would report Blue 5:35, and Red 8:25, neutral would be 1:00. Node B might be Red 14:30… etc.
Each Node could be 100-400m apart, with the Master not being central.
Master would have the ability to reset the system to a ready state once the 15 mins was finished.
My guess is sending the status of the Node Red, Blue or Neutral could be sent every 1 second and it wouldn’t need to be perfect. The data on the status would surely be less than 250kb
Hi sir what a great tutorial. Is it possible a ultrasonic sensor is connected to the master board and an haptic motor in the slave board will vibrate if the ultrasonic sensor(in the master) detected an object?
What is the maximum number of devices that can be controlled by a single board?
Also what is the maximum number of devices that can be in the mesh network?
20 devices unencrypted, 10 if encrypted.
@@digihz_data Thank you. Also what is the total number of nodes that can be in the network?
@@ronakranka3317 i don't know about that. But I think it would be possible with more than 10/20 with careful planing of each device.
How many devices support this protocol in one connection
I have tried esp now protocol, slave sending sensor data to master.
Surprisingly, i got about 500m range and the data comms still pretty good.
Woah….
500m
Which ESP BOARD u have used ?
Hi, I have the ESP32 link installed in my Arduino IDE preferences and I have the ESP32 working. However I do NOT have the ESP32 Examples lib and therefore I don't have the ESPNow examples. Can you tell me where I can download the ESP32 lib from? BTW, Great video and super explanations.
great work sir. one suggestion- pls improve background
Can we use this as a intercom device for rider in two way communication.
Hello Sachin, do we have a way to make ESP-NOW Mesh? Just like a WIFI-MESH?
I like your energy very inspirational,
How to make a mesh-network, where devices can join the network automatically when they’re near and a device can send data to certain device via other devices if their not in direct line 😊
Hi. I am interested in all 4. Especially the 4th "ESPNOW to internet(Blynk)" Thanks for a to the point video. Great job!
Dear sir
Our project is based on Ai,iotE3sp32,based carbon monitoring system please suggest pcb, device used in our project
i wish i could understand the accent. Looks like good content
Hi , I want to communicate two esp32 c3 via bluetooth using VS code . And check the range. Which prgrm should I use?
Very well put together video. Thanks for the clear example.
I don't have ESP32, so I can use a ESP8266/NodeMCU as Master and Wemos D1R1 as a Slave under ESPNOW ?
Hi. Can you make a project on controlling a robot car with fpv camera using espnow? Thks
plz make a espnow weather station with outdoor sensors
It seems perfect to activate an alarm inside my house in response to winding sensors in doors and windows. Greetings
perfect application
Hi really liked your tutorial here. I just have one question as to how can ESP 8266 be used in a mesh to send the data from one end to another with the other ESP being the repeater.
Would really like your help with it as I am stuck with my project where I need to send the signal for more than 200m distance.
How about ESP-NOW LR mode? Can you show us how to do it?
Running espnow on esp32 with continuous data transfer heating esp board. Are there any specific requirements to throttle up data sending rate for optimum heating??
Excellent brother.
Magic, magic 👏👏
I found an error in transmitter code change (myData - data) so that we are transferring same data variable
You can try Arduino MKR NB 1500
Is it possible to connect one of those master or slave controller to blynk cloud by connecting with internet
Yes
I mean I haven’t try that, but I think we can make this possible somehow
@@techiesms please make a video on this. It will help us a lot. Thanks
Cool, l was looking for that! Top man , thank you
9:58 wow that was a hot day (48C) at such a low humidity relative (27)! It would be useful to see ESPNOW central receiver to also able to connect to WiFi (as well as ESPNOW) or perhaps a serial link to another ESP module for the WiFi. I like the way you cover a lot of ground quickly just giving the relevant info - thanks.
Can I pls get the master and slave full program?
What means It can work like wifi Environment smart home
It works on machine to machine talk
That means it don’t require WiFi router connectivity
thanks for always sharing
Thank you for your very helpful and interesting video. I have subscribed and look forward to more videos :-)
Here is the next part of ESPNOW, Two way communication- th-cam.com/video/3mNawOV1W9k/w-d-xo.html
@@techiesms ah brilliant, thank you very much, just watched!
I have copy the relay status of master side esp8266 pin to slave side esp8266 pin connected via both same wifi ssid...how should I proceed
Watch this video to know how to use it with esp8266 as well th-cam.com/video/3mNawOV1W9k/w-d-xo.html
nice, great video, thank you, possible used es8266?
Yes, of course
what's the camera that you're using to shoot these awesome videos?
Canon 750d
And
iPhone 11 Pro
Hi bro. Please make a video on Esp8266 as NAS server accessible in over the world using SSD or HHD not sd card or pen drive.
Besides the builtin serial terminal you used. What is the other terminal you used that was displaying data in yellow? Love your videos. Keep up the good work.
The other terminal is realterm
Exactly
thanks for the great explanation sir
I love your videos. Please make a video on ESNOW_LR (Long Range protocol) for extra long range.
Great replacement for rf remotes
I had a small doubt I will be sending data of my gas sensor to esp32 the issue that I am facing is power management, can you make video how to choose power supply for wsn with power hungery parts please
which gas sensor you are using?
@@techiesms MQ-4
i found error esp_now.h not available
any help?
Great video sir!
Glad you liked it!
Set power level to maximum 19.5 dbm and check out range!
🆒 Excellent video! Thanks from whole 🇵🇰
What will happen when it already consumed 250 bytes of data limit?
Do we control devices with internet too when we are outside home
Not directly with this configuration. We need to do something different to do that, but yes we will be able to do it
Another great explanation video. Thanks for making .
Can I use esp now along with regular WiFi connection??
For example:-
3 slaves sending data to one master using Esp-Now protocol.
Master device reads all data & send data using mqtt protocol on local home automation server or cloud mqtt Server.
I’ll also upload video for that. Stay tuned…
Hello and congratulations for the tutorial.
I ask you: is it possible to adapt these codes for ESP-8266? I would like to build a remote and the form factor is important to me. Thank you.
Here is the video that will guide you with using ESPNOW on esp8266
th-cam.com/video/3mNawOV1W9k/w-d-xo.html
Grazie, siii. Lo avevo appena visto ieri. Sei un grande!!.💪
Can you stream the video from an esp32 cam board???
I don't think so....
Yes
On local IP protocol only
Is it possible to display various sensor data from different esp32 boards on one arduino IoT or blynk dashboard designed as one device, or integrating lets say 2 esp devices data on a single platform or dashboard?
Yes. I have done it using the ‘new’ Blynk app.
Great video Thanks! 👍😊
great video ,thank you for sharing
Please could you recommend a good company in India where I can get my PCB board made from a Gerber file? Thanks in advance. Regards.
Metro PCB gujrat
Welcome sir
Hi i was trying to compile the code you shared, an error messages show myData was not declared in the scope! i have try some ESP code from other also it show other error! most of the esp code don't works to me . isit my setting, library version,............... wrong? Please help me!!!!!! the error message (Compilation error: invalid conversion from 'void (*)(const uint8_t*, const uint8_t*, int)' {aka 'void (*)(const unsigned char*, const unsigned char*, int)'} to 'esp_now_recv_cb_t' {aka 'void (*)(const esp_now_recv_info*, const unsigned char*, int)'} [-fpermissive])
You can make video on ttgo t call
I already made couple of them
what project you want to see on TTGO TCALL?
@@techiesms how to make a voice call. Making a home automation Using wifi Bluetooth and cellular network together
Would it need wifi
how to get rssi with esp now
It would be great project to start with; if we can integrate ESP-now with Arduino IOT cloud and control/get data from multiple rooms/sensors via master ESP connected to IOT cloud.
We can do that as well, still I haven’t try that yet
Very inspiring video sir. I am a big fan of you. I have a project idea. I want to collect sensor data from 5 "slave" nodes and want to show those data sequentially on "master" node. Is it possible ? If possible, then guide me.
Yes
It will use many to one configuration in ESPNOW protocol
Can you please give code for esp8266? Yours compile only for esp32
Watch this video to know how to program it in esp8266 board th-cam.com/video/3mNawOV1W9k/w-d-xo.html
Wat of developing a project use esp now and paper touch screen
What about ESPNOW and TFT touch screen display th-cam.com/video/3mNawOV1W9k/w-d-xo.html
Can you sell ttgo t-call on your e-commerce shop
Not now, but definitely in near future.
I’ll update it on my Instagram
@@techiesms ok😒
I have randomly seen this video.
And I think something is related to me.
But, I didn't understand the use of this chip
awesome!!!
Thanks
Do watch out the next part of the video,
Two way communication- th-cam.com/video/3mNawOV1W9k/w-d-xo.html
My board not working Please help me
whats the error?
Okay, Okay
What language is this guy speaking in???