I haven't try it yet. If its hard to remove it I would try to heat it up with a hairdryer. Hairdryer could be good for many things, last weekend it saved our barbecue party :D
I ran a 30min test with Cinebench r23 and open hardware monitor. I saved out the test result that you can open from this link: adamendrodi.com/wp-content/uploads/2022/04/i9_12900k_BQ_DR_pro4_30min_test.Report.txt In addition a 1650 gtx card was used. If you know other way to test it share with me and I give it a try.
@@velesworth3134 As I saw Temperature #5 was really wavy. Sometimes it went over to 100 and sometimes it was low. Take it to account that I run it without top level front fans, it was set to level one out of 3 on the house.
@@velesworth3134 I did an other test, 30+ min again. In the beginning of the test it is jump up to 100 and stay around there and not going further (luckily). I need to investigate to figure out how it could be stable. Here you can see new results: adamendrodi.com/wp-content/uploads/2022/04/cpu_temp_housecooling_included.png
many say that it does not support i9, because it puts a lot of effort into the VRM and overheats, that it would be forcing it, I bought an asus z690-p ddr5 and I plan to put an i5 12600kf cpu in it, but I thought it supported the i9
@@adamendrodi8581 you may find it in the UEFI BIOS→"AI Tweaker" tab→Internal CPU Power Management and i wonder you can hit some number in the box written "Auto" could you check it please?
@@adamendrodi8581 Thank you so much for taking time to check it. I was thinking about buying it but was not sure if i can change it. I really appreciate your help!
Yes, it happened with me as well, someone else had the same in the chat. It works for me for about half year now without any problem but it doesn't mean that it will works for long run.
Es mucho el procesador para esa placa, le debiste poner la Z690 Aorus Master, la Z690-P solo soporta el i7 12700k, nunca se pone sobre unicel, tiene estática y más si ahí venía el gabinete, siempre es sobre un cartón, y se coloca bien la pasta sin que se salga del procesador porque luego ocurren algunos problemas 😉
So 12900k is compatible with this motherboard, check this link below: www.asus.com/hu/Motherboards-Components/Motherboards/PRIME/PRIME-Z690-P/HelpDesk_QVL_CPU/ other than that you are right, thank you for watching!
@@adamendrodi8581 Sube la configuración de la BIOS para así sacarme de dudas y ver si mi placa no está dañada, porque primero no me dejaba iniciar bien el Windows y luego no detectaba los almacenamientos un M.2 y HDD, utilice un controlador para que hiciera el proceso porque así con GTP Windows 11 ISO por automático no dejó hacer la instalación, tuvo que ser por el controlador, y antes de eso me aparecía que había un error en la BIOS
Dumb question, does the heatsink pad sticks to the m.2? Would it be difficult removing it to switch it with a new m.2?
I haven't try it yet. If its hard to remove it I would try to heat it up with a hairdryer. Hairdryer could be good for many things, last weekend it saved our barbecue party :D
Very artistic approach
can you tell me the name of the bolt that you used to screw the ssd into the mv2 slot?
Sorry, I don't know its name. It was included when I bought the motherboard.
Very nice build I got the same motherboard & works perfectly I love it! Cheers mate
Glad to hear that! I still haven't bought GPU yet hahaa Hopefully beginning of next year 🙂
Which m2 are u using? Gotta buy new m2 dunno what to get regarding compability
@@adamendrodi8581 3060 ti would do just perfect, highly recommended!
@@TheMineMapTV I have a Samsung 980 pro 1T
@@Martz7 Yes, those 30xx series are great cards!
What are the temperatures in benchmark? Can Dark Rock Pro 4 cool it down ?
I ran a 30min test with Cinebench r23 and open hardware monitor. I saved out the test result that you can open from this link:
adamendrodi.com/wp-content/uploads/2022/04/i9_12900k_BQ_DR_pro4_30min_test.Report.txt
In addition a 1650 gtx card was used.
If you know other way to test it share with me and I give it a try.
@@adamendrodi8581 Thx, so: Temperature #5 : 85 19 115 got to 115 degrees under load? Is that right?
@@velesworth3134 As I saw Temperature #5 was really wavy. Sometimes it went over to 100 and sometimes it was low. Take it to account that I run it without top level front fans, it was set to level one out of 3 on the house.
@@adamendrodi8581 Is your room temperature affected by CPU temp on full load?
@@velesworth3134 I did an other test, 30+ min again. In the beginning of the test it is jump up to 100 and stay around there and not going further (luckily). I need to investigate to figure out how it could be stable. Here you can see new results: adamendrodi.com/wp-content/uploads/2022/04/cpu_temp_housecooling_included.png
many say that it does not support i9, because it puts a lot of effort into the VRM and overheats, that it would be forcing it, I bought an asus z690-p ddr5 and I plan to put an i5 12600kf cpu in it, but I thought it supported the i9
I prefer to buy this over ddr5 one since I didn't want to rank 8 and 16 gb memory. You won't be able to sell them in future...
Can this motherboard set the value for "Short Duration Package Power Limit" to any watt you like? or is it fixed to Auto and can't be changed?
tbh I don't know. Where should I find it in BIOS?
@@adamendrodi8581 you may find it in the UEFI BIOS→"AI Tweaker" tab→Internal CPU Power Management
and i wonder you can hit some number in the box written "Auto"
could you check it please?
@@avert8610 Yes, there is "Maximum CPU core Temperature" which was set to auto. I'll set it to a 90 for the long run.
@@avert8610 it contains Short Duration Package Power Limit under power management and it can be set by numbers
@@adamendrodi8581 Thank you so much for taking time to check it.
I was thinking about buying it but was not sure if i can change it.
I really appreciate your help!
Thank you sir
Есть перегиб? Плата крепится на 6 винтов а не на 9
Is the ssd bend when u srew it ??
Yes, it happened with me as well, someone else had the same in the chat. It works for me for about half year now without any problem but it doesn't mean that it will works for long run.
Зачем снимать наклейку с М2????)))
С таким успехом ты мог и не снимать защитную пленку с термопрокладки))))
Duct tape?
Maybe this equipment will be a solution to keep processor in right temperature:
th-cam.com/video/zHXZMtWOVJ4/w-d-xo.html
Es mucho el procesador para esa placa, le debiste poner la Z690 Aorus Master, la Z690-P solo soporta el i7 12700k, nunca se pone sobre unicel, tiene estática y más si ahí venía el gabinete, siempre es sobre un cartón, y se coloca bien la pasta sin que se salga del procesador porque luego ocurren algunos problemas 😉
So 12900k is compatible with this motherboard, check this link below:
www.asus.com/hu/Motherboards-Components/Motherboards/PRIME/PRIME-Z690-P/HelpDesk_QVL_CPU/
other than that you are right, thank you for watching!
@@adamendrodi8581 Sube la configuración de la BIOS para así sacarme de dudas y ver si mi placa no está dañada, porque primero no me dejaba iniciar bien el Windows y luego no detectaba los almacenamientos un M.2 y HDD, utilice un controlador para que hiciera el proceso porque así con GTP Windows 11 ISO por automático no dejó hacer la instalación, tuvo que ser por el controlador, y antes de eso me aparecía que había un error en la BIOS
@@DARKO_721 on my side everything was fine :)
@@adamendrodi8581 Ya funciono correctamente mi PC ya solo falta una tarjeta grafica