Yes, I was….but it was the exhaust running up the bar, figured that out after. Looks comical. The saw is so big, you don’t need to cut with it- scares the wood! 😀
I have been waiting for your to run it buddy! I think that looks pretty cool myself. Now that would have been useful recently for myself with that bar or longer. Hmmm. I kinda have been thinking about a 395 though as well. Thanks again and glad you got the video up sir
jason is more apt to go with a 395. He likes the tried and true stuff a bit more. He just has so much history cutting big wood. I think he said he has a 2100 or something like that. he has been asking me a good place to get it worked on. I told him, I just do not know. @@aaronpowell4885
INDIANA DOUG...the clutch drum bearing lube situation will be interesting...I am curious what they decided...the jetting comments are great...go easy there....
What do they cost that thing is an animal!!!! 3 turns out on the h&l I gotta say I was just a smidgen bit skeptical that is exactly what I'm looking for for my alaskan mill I hope you keep the videos up on this beast Budd to see its reliability,tuned cuts,etc awesome video!!!!!😊
Dang, that thing was loud. I'm not sure it knee it was cutting anything. Next time, if you could help turn it down by playing some good old hard rock, please. Be blessed. My friend.
Wake up call! The quality and QC of clone chainsaws are the same across the board. I’ve had them all, and it’s the luck of the draw if yours is perfect out of the box. They’re getting much better, but some will nickel and dime you. Any clone from any maker, it’s just how it is. Only Neotec has the 3120 model at this time.
Go give Tanton a hard time here👉 youtube.com/@tantonrosencranz2718?si=ejfRhoaEeV6ksV7q
Ha! It’s so powerful, even the chain blows chips off the log!! Never seen that before 👍👍
Are you serious? Because I thought that was just me.🤣 I don’t know how that happened.
Yes, I was….but it was the exhaust running up the bar, figured that out after.
Looks comical. The saw is so big, you don’t need to cut with it- scares the wood! 😀
funny! @@crazyfeller5704
I have been waiting for your to run it buddy! I think that looks pretty cool myself. Now that would have been useful recently for myself with that bar or longer. Hmmm. I kinda have been thinking about a 395 though as well. Thanks again and glad you got the video up sir
👍🏻 ya'll sure could've put it to a good test! No 592?😅
Thanks man, it’s a beast.
jason is more apt to go with a 395. He likes the tried and true stuff a bit more. He just has so much history cutting big wood. I think he said he has a 2100 or something like that. he has been asking me a good place to get it worked on. I told him, I just do not know. @@aaronpowell4885
Seems like a beast. Cheers
INDIANA DOUG...the clutch drum bearing lube situation will be interesting...I am curious what they decided...the jetting comments are great...go easy there....
Nothing but a thing🤣
It said; where's the beef? Seriously though, looks like a beast👍🏻
Well, that doesn't look too shabby at all. I'm also impressed with how it behaved.
Definitely running a bit rich, better a little rich to break it in. Definitely looks heavy and has a lot of power.
Agreed. The limited coil concerns me the most.😒
@@IndianaDougwhat’s a limited coil? Prevents the rpm exceeding a certainty number ?
Many thanks
You got it. Limits over revving.
I ❤ that saw! Nice job,Doug 🙏🏿🇺🇸🪓
She surprised me a little.
Looking forward to the teardown. It runs great!!!
Yep, already finding a couple concerns😒
I like it! Will be watching for the teardown as well @@IndianaDoug
I had nothing to do with this. But it's alive running pretty damn good I say 😁
Mhmm🤔
Thanks, I was looking forward to seeing that!
Hope you enjoyed it!
Things got some torque!!!.
I was surprised to be honest
@@IndianaDoug I wonder what one would do with some port and mechine work and a CPI pipe 🤔.
That tells me if you put a factory carb on it it should really wake that thing up!
I may end doing that, not sure yet.
@@IndianaDoug probably have to get a small loan or sell a kidney or something
@@jakegorman7121 🤣 they ain’t giving that stuff away. Pretty crazy.
Don’t forget to put on a “non” limited coil, then you’ll just need to tune it by ear! 😉
I need one I Been waiting for them to make one 😮
Should be here in April
If you get bored with that please send it my way. I would love to cut with one at least once.
Will do 😁
The Neo-Nuke. Because they had to air drop deliver it from a b-52 stratofortress
I like it😁
That is a monster.
I like it
Hope Santas got enough extra trunk space on his sled.....
Sure needs large wood or a really aggressive chain to load it up
Agreed. I’ll do that soon👍🏻
Sweet!
Oh yeah!
I think so Ted!
Defitnely need som lereal big wood seems very strong❤
Soon
agreed!
so wonderful beautiful video my best friend i love it see so nice
Thanks for video! I'm waiting for when it will be available for purchase! I'm curious about my OEM 3120 because it's different. :)
What do they cost that thing is an animal!!!! 3 turns out on the h&l I gotta say I was just a smidgen bit skeptical that is exactly what I'm looking for for my alaskan mill I hope you keep the videos up on this beast Budd to see its reliability,tuned cuts,etc awesome video!!!!!😊
They said $599 for powerhead when they get here.
Man if it's up to snuff in the reliability department I'm totally on board!!!
I'm surprised it wound up that high for being 3 turns out...
Dang, that thing was loud. I'm not sure it knee it was cutting anything. Next time, if you could help turn it down by playing some good old hard rock, please. Be blessed. My friend.
Yes! Next video I’m hoping to make some real cuts👍🏻
do u get this from farmertec aswell? I never wanted to risk buying neotec because of all the bad feedback
Wake up call! The quality and QC of clone chainsaws are the same across the board. I’ve had them all, and it’s the luck of the draw if yours is perfect out of the box. They’re getting much better, but some will nickel and dime you. Any clone from any maker, it’s just how it is.
Only Neotec has the 3120 model at this time.
😁
? Wish I could have seen it in appropriate sized wood.
It’s on another video of mine cutting bigger Hickory.
Where do you source these from?
Neotec. Be here in April
Those Jets don't come three turns out they come one and a half turns out so I don't know why you're sitting there saying you didn't tune that saw
Do you have a 3120 clone? If not, how in the hell do you know how the carbs are set?
@@ihateleftards for real.....
Yes they do