city model for science exhibition | working model | city model out of paper |
ฝัง
- เผยแพร่เมื่อ 26 พ.ค. 2023
- Hi Friends,
In this video, you will be learning how to make a city model for high school projects and science exhibition. This model can be used as a streetlight model or a city model. Step by step tutorial for making this model is given in the video.
Amazon: www.amazon.in/shop/diyasfunplay
Website: diyasfunplay.com/
TH-cam: / diyasfunplayandlearning
E-mail: enquirydiyasfunplay@gmail.com
Mountain model making:
• Dam working model | Ov...
Tree model making:
• Easy DIY Tree Diorama...
This video is for educational and model making purpose. This model will be apt for school projects, science exhibitions. Hope you will enjoy this video
#streetlight
#streetlightmodel
#city
#citymodel
#highschoolproject
#diy
#howto
#schoolproject
#diyproject
#diyasfunplay
All contents here are child friendly. There are loads of information to learn and play.
Don't forget friends. If you like this video please "like" and "share" it with your friends to show your support.
If there's something you would like to inform us,
please let us know in the comments section. Thanks.
Please subscribe to our channel, like, share, this video if you had enjoyed this video.
/ diyasfunplayandlearning - แนวปฏิบัติและการใช้ชีวิต
This was a piece of art! Much love
Thanks a lot 😊😊😊
So beautiful 😊❤
Fantastic
Thank you so much 😀
So beautiful so elegant
Just like wow woe😊
Thank you so much 😊
Hello can u tell me what materials do i needed to make a pesticide robot
What material used
Ek sath multiple Led kaise jode battrey ko aur battery konsi le
How did you attach led lights with battery?
th-cam.com/video/xQ-P-LXG_rw/w-d-xo.html
What length and breadth was the thermocol size
what are the materials needed?
Hi where can i find the paper strips
Use plain white paper and cut them into small stripes.
Hello dear how to get lights
Local electrical store or online
Hello how can you joined the wires in battery
th-cam.com/video/xQ-P-LXG_rw/w-d-xo.html
niceeeeeeeeeeeeeeeeeeeee
Thank you very much 😊😊😊😊
That battery where can tell me address
Please 🥺
Check in your local electrical stores
Where did u get the trees
You can make them or buy online.
th-cam.com/video/2XOfpHI_n9A/w-d-xo.html
th-cam.com/video/3OZjZnfq9fU/w-d-xo.html
You can make one easily by following below steps.
In the first video I've made a tree with woolen thread. In the second video, I've made a tree canopy using sponge. Prepare wires as shown in the first video. For foliage, use a thick/strong yellow colour sponge. You will not get good results if you use a soft sponge. Tear the sponge into tiny pieces. Add green colour and mix it thoroughly and let it dry for 24 hours. When the sponge is completely dry add some "mud podge" on the sponge and mix it thoroughly. Mud podge will be white when wet and will become clear after drying. After drying the sponge with mud podge completely, you can use it on the wires to make the tree model as shown in the first video. You will need a strong clear glue spray.
Important points: Sponge should be completely dry, else it will not stick to the wires. Sponge particles should be very very tiny for good results. Hope this helps.
Hello! What paper did you use?
Chart paper
@@diyasfunplay thank u po!
Sir please let me know about the wiring process 😵💫
How to make without glue gun
Use some quick drying glue like fevi quik
How to connect all bulb
There are 2 ways.
1) Connect all the red wires of the 4 led lights to the red wire of the 9v battery connector. Similarly connect all the black wires of the 4 led lights to the black wire of the 9v battery connector.
2) refer below video
th-cam.com/video/Ywsn-XhrXbo/w-d-xo.html
PaHiccupa
Thanks for the visit 😊