BAJA should create a plug n play connector so that you don’t have to wire to battery or plug in relays… kinda of meh on the set up. But the final result is cool.
I’m looking into doing this upgrade on my bike but reading the comments it makes me think twice because I didn’t know you had to plug it into relay and wire it up in a certain way. I thought it was a plug-in play set up
This upgrade is one you will definitely want to do. Its an amazing how bright it is. I finally put one on mine. But yes it has to be wired to the battery. The relay is there for the bike turn on. Once the bike is turned on like running it send the signal to relay to turn on. The harness is pretty much a plug and play. Just the battery hook up portion is not.
The JROD kit pulls the light back about 1/4 of an inch. It comes with spacers to do this. I had some spacers so we just spaced it out with the forever RAD kit.
@@kennyb7883 I have a bunck of odds and ends around. So I used the spacers from a t.v. wall mount. You usually get a types to mount tvs to the mount. But you could go to a Lowes or something like that and buy a round spacer that fits the bolt, 1/4 to 3/8 spacer will knock it back a little...10-1!!
BAJA should create a plug n play connector so that you don’t have to wire to battery or plug in relays… kinda of meh on the set up. But the final result is cool.
I believe the biggest reason is because of the Indian canbus they use. It has to be turned on after that initially powers up.
I’m looking into doing this upgrade on my bike but reading the comments it makes me think twice because I didn’t know you had to plug it into relay and wire it up in a certain way. I thought it was a plug-in play set up
This upgrade is one you will definitely want to do. Its an amazing how bright it is. I finally put one on mine. But yes it has to be wired to the battery. The relay is there for the bike turn on. Once the bike is turned on like running it send the signal to relay to turn on. The harness is pretty much a plug and play. Just the battery hook up portion is not.
CVMA 27-2 💀♠️🟡🔴⚫️🤘
10-1!!! Thanks for watching!
CVMA 3-2
Saw that you had both kits. Is there a reason you went with one over the other?
The JROD kit pulls the light back about 1/4 of an inch. It comes with spacers to do this. I had some spacers so we just spaced it out with the forever RAD kit.
Also a buddy of mine bought one kit and I bought the other, that is the only reason.
What did you use for spacers? How many & how thick were they...CVMA18-1 🤘🤙@reyffdesigns1282
@@kennyb7883 I have a bunck of odds and ends around. So I used the spacers from a t.v. wall mount. You usually get a types to mount tvs to the mount. But you could go to a Lowes or something like that and buy a round spacer that fits the bolt, 1/4 to 3/8 spacer will knock it back a little...10-1!!
Was that a zip tie gun🔫 ?
Yess...think I got it from Harbor freight if I remember correctly.