Best and Worst Hobby Purchases of 2023
ฝัง
- เผยแพร่เมื่อ 22 พ.ค. 2024
- gamefound.com/projects/miniwa...
New Ravaged Star Minis! Now with Three Awesome Armies!
Thanks to MiniWarGaming for sponsoring this video!
In this video Jay goes through his top hobby products for 2023! We have new videos every Monday, Wednesday and Friday!
We have a Patreon! Support us here and get more content!:
/ eonsofbattle
We make lots of 3D Models and Terrain for your table:
comicsgamesandthings.com/shop...
www.myminifactory.com/users/e...
eonsofbattle.co/
Help Support the Show in Style! T-Shirts and Sweatshirts Available!
Buy two or more items and get free shipping!
We also do the occastional live stream!
/ eonsofbattle
Discord Server:
/ discord
Check Out Our Live Streams!:
• All Live Streams
EonsOfBattle Instagram:
/ eonsofbattle
EonsOfBattle Facebook Page:
/ eobfans
EonsOfBattle Reddit:
/ eonsofbattle
Twitter:
/ eonsofbattle
Assistant Editor:
Amanda B.
Intro Animation By: Liqerise
/ liqerise
#warhammer40k #miniatures #gamesworkshop - แนวปฏิบัติและการใช้ชีวิต
Jay, you're using accelerator wrong! Unscrew the cap, and dab the end that sits in the liquid against one of the two surfaces you're going to glue. Then put glue on the other, then fit them together. You waste WAAAAY less accelerator, the smell doesn't spread, and it creates a much stronger bond.
I came here to say this too!
I came here to say this as well. Lol
Me too!
Who's Jay?
100%
For me, I treat accelerator like a tack weld to hold things long enough to make it more secure later...or when the majority of the CA glue bead is visible and I cannot hold the joint stable enough.
One trick with superglue accelerator is to spray it on one surface and put the superglue on the other surface. Then when you put the two together, you'll have accelerator on the entire surface.
I was going to say the same thing. That way all of the CA glue makes contact with the accelerator instead of just the edges.
Apparently a solution of water and baking soda works too. But i havent tried it yet. Maybs worth a shot.
I've heard of baking soda being used to strengthen a CA bond for sure, not sure if it accelerates it or not though. Adam Savage has lots of thoughts on glue lol I think there's a whole video on Tested about CA glue@@MrDeadmoss
This is what I came here to say too. User error here.
The only problem (for me at least) is that I always seem to have to wiggle joints around to get them just right and having the accelerator in place already cuts that wiggle time down too much.
I bought a shop to turn into a hobby and gaming store! Definitely the best purchase I made this year - but also the hardest!
Second would be a cheapo portable airbrush perfect for terrain and basing
👏👏👏👏👏
Good luck. Its cause of folks like you that we can game
Due to health reason shaking paints properly can be difficult for me, so a couple of years ago I bought a cheap vortex mixer and it was terrible. A few months later I got a proper lab vortex mixer as a gift and it’s been amazing, it makes painting so much easier for me and I could never go back to be honest.
Highly recommend for anyone who struggles with mixing their paint.
I bought a lab vortex mixer as well and they help so much!
I have bad enough arthritis that it can be excruciating to shake paints well. I bought a $100 vortex mixer and was utterly underwhelmed. It does struggle with thicker paints to the point it’s useless.
depends on the paint i find but i have had good luck with mine so far!
@@DukensteinA1
I have the cheap one he hated, but it's worked great for me.
I needed to remix some paints that have been in storage for 10 years
can you share the brand or model please? Thank you!
I'll always remember some of Adam Savages advice from tested. When look at a new tool, buy the cheapest option first. Use it, see if it fits in your work flow, learn it's ins and outs, and when it wears out and you know you want it, go and buy the best version that is within your budget to do so.
You can take your vacuum filter outside and blast some air through it and it should work for a good while after that
I have no idea why but this gave me the thought of taking a vacuum outside, to the beach.
Then I wonderd what would happen if you had a hypothetical vacuum cleaner that has infinite storage and never clogs, and brought it too the beach.
Would it just keep vacuuming deep into the ground?
You can probably do this using your airbrush (no paint in it).
@@YanniCooper lol that’s exactly what I was thinking when i made the comment
I don't know if anyone else has mentioned this, but a nice alternative to super glue accelerator that I learned about from Adam Savage Videos is baking soda. You only need to spray a little on the super glue and it will react and cause it to cure pretty fast. It also appears to add strength to the joint if you use a decent amount of baking soda. Funnily enough, the oils on your skin are also an accelerator which is why super glue almost instantly dries when you touch it.
I _highly_ recommend putting the super glue accelerant into small needle-tip applicator bottles. You waste a lot less, it's more precise, and it doesn't get the stinky oil everywhere.
For a vacuum you want a pneumatic one, they have lots of suction and are very simple and hardy. I don't know if they have it in the US but a henry hoover is £100 and its very durable, if they can survive construction yards they can survive a hobby desk!
Yeah those Henry Hoovers (and the smaller Henrietta) are god damn workhorses. There's a reason why they're so common place in industrial settings
@@luketfer absolutely, they are amazing for simple work like this.
Gritty and harsh particulates absolutely ruin bagless vacuums, it's best just to get a bagged one.
I have nerve issues in my hands. A vortex mixer helps me out a lot.
It mixes my paint better then I can by hand and I don't send as many bottles flying across the room as much either
Exactly! Wrist issues with sharp pains make it hard to shake. Vortex Mixer? A blessing
Jay's enthusiasm is infectious. I'm tempted to pick up half of the things he recommends.
Hopefully he isn't wiping Goob Goo off the whiteboard at the end of the day.
Good and big paintbrushes with a good tip actually can do everything. From basecoat to detail. I use the Newton ones. They are expensive but last much longer than the GW or Armypainter ones.
I also bought a Jucoci case awhile ago and it's been a big help. I'd recommend as a good sturdy travel case. Nice handle and metal trays with adjustable height options
Added a cheap desk from IKEA which I love. Simple desk with a big drawer that I cram my tools in, and grass tufts/terrain stuff for bases. Also, AWESOME video and thank you for your candid honesty as always. Love it!
With the superglue activator, spray on the join on one part before you put them together or dip that part into some of it before putting together. The stuff has been a life changer.
Great video! Stop spraying the accelerator, just unscrew the lid, and just touch the straw part on whatever part needs it. So much better than spraying it and getting it all over.
A massage gun is lifesaving for mixing paints. I also use it on my back during paint sessions to ease the aching as well as my wrist & arm
Got a Jucoci case after you first mentioned them. Good cases. Now im magnetizing everything so they stick to the trays. Also getting a second one or two.
Jay! I bought an onilab mixer, and mine works fine. It'll even mix the citadel paints if they're at layer paint consistency. For the thicker paints I add a mixing ball and a few drops of lahmien medium. . . works well.
Jay, regarding your handheld vacuum I use a small 1.5 gal Hyper Tough wet/dry vac you find at Wallyworld that's not too big or heavy and cleans up a lot more than your previous vacuum. It comes with the attachments you'd expect and a bracket so you can hang it close to where you'd be using it most. Also, videos like these can really use some affiliate links in the info as I always seem to find something that I could use, and knowing it helps the channel out a bit is always a plus.
Appreciate the videos Jay, in case people don't know massage guns can work really well as a paint mixer! I picked one up to help with a back injury I got at work several years ago, and had some vallejo green and corax white that was globbed up like nothing I had seen before. No amount of hand work was getting this stuff smoothed out, and I had started looking at paint mixers online, idlily using the massage gun on my leg until it dawned on me! I threw a ball bearing into the pot, and put a flat end on my massage gun and let it get to work. Results were amazing, to the point where I knew this was what I would be doing for all my paints. Very easy budget friendly alternative, and its use extends well beyond helping with my hobby!
The best purchase i made this year(although i started in january) are the modular hobby zone storage boxes. Now everything has its place and i really feel that im into the miniature painting hobby forreal
The vortex mixer is a great solution for those who don’t paint often. Especially contrast paints. You can see the pigment collect on the bottom of the bottle, and no way just shaking it gets those to mix back in. I’ve tried, and it took even my vortex mixer a couple of minutes to get those to mix. I’d be lifting weights before I would be able to mix seldom used contrast by hand.
try adding stainless steel balls as agitators
I've successfully revived my Vallejo and Citadel that were in storage for ten years with a VM and steel balls
I have a badger Patriot 105 and I have a handful of needles I switch between. I’ve had this airbrush for over a decade. I had it back when I had no idea how to take care of it and it’s still performing really well now that I do know what I’m doing. I do everything from primer coat to very fine detail airbrushing.
I have the same vortex mixer and I've been using it for a year now and I love it! You probably used it more in the 5 months than I have in the 12 but so far it is going strong and I never wanna have to shake paints manually again
I have an Onilab mixer and I think it works quite well, you just have to make sure to drop in a mixing ball.
The accelerator isn’t that much of a pain if you get it in a pump- bottle instead of a rattle can. Smell is still kinda meh but it doesn’t get literally anywhere
I got a vortex mixer (knock of brand) and glad I did as speed paint white needs it big time. Also got silicon brushes for sculpting. Makes life a lot easier.
I got a Jucoci case (after converting everything to magnetic cobalt keep bases) and i will absolutely be buying a second one. Love the thing.
Totally feel you on the vortex mixer. I caved to the hype... just shake your paint. I did buy some ProAcryl this year, and I love these paints.
I’m glad those size 10-12 are work. It’s a little comical to see the mini and a giant paint brush. Lol. As long it works keep rocking it man!! Thanks gents!! Fantastic as always!!!
How I use accelerator is with a disposable pipette (I reuse it as much I can). I open the cap, dip the pipette and get a tiny amount. Then I place a drop on the joint after putting glue on and holding it in place. It soaks in and sets most of the glue. I've only done this on resin models so far. Other way is to use a cotton swap to apply on one side of the joint first then put the glue on the other side. Bonds pretty fast when pressed together.
I added the Harder and Steenbeck Ultra to my hobby desk and it's amazing. Easy to use, accurate and with 5 presets I can easily get the results I want. Highly recommend!
I ordered one in October, the Squidmar special edition, it’s shipping this week. But I currently use 2, I use a Master brush I got for $35 off Amazon with a .5mm nozzle for priming and varnishing and some base coating. My Iawata with a .3? mm nozzle is used for highlighting and detailing. I was able to spray a Defkopta around an already painted Ork without over spraying the Ork. Once I get the H&S Ultra, the master will be relegated to varnish only. Varnish is a BITCH to clean out.
If it makes you feel any better, I've been using that same vortex mixer for the last 4 years without issue. Hopefully it continues to perform admirably for years to come.
I love superglue accelerator. The way I do it is I spray one side, dab glue on the other and then once you connect them it bonds basically instantly. You have like 1-2 seconds to adjust the position but then, thats it. That is one of the downsides of it but also an upside. And yeah, the fumes are rough. I can open the balcony door and turn on a fan to blow the air out and I need it every time I use it. So that I understand but the stability it brings shouldn't be an issue.
Toothpicks as brushes are underrated (silicone nubby brushes too). I paint chaos trim regularly and it always seems to be that I can fit a toothpick into the nooks and crannies of the detailing to touch up overages on the trim.
Funny - just so happened to be doing my annual refresh of my GW paint pots when you mention Vortexers. I use a sizeable one - lab grade, weighs a ton, and here’s a testament of what a good job it does: i hadn’t been on my game with getting all my paints refreshed with lahmian medium and water - so I found my Yriel yellow had a solid clump in the center. A minute of vortexing with 2ml water had it mushy, and another minute the freakin thing disappeared - and weirdly enough - there seemed more water than I had put in!! So it looks like you CAN revive clumps afterall! Vortexers FTW!
Hey Jay, I think you can fix the broken air brush with beeswax. I have a really crappy airbrush where I had a similar problem. I used beeswax and slightly melted it into the places where the tightness issues were present, and it works like a charm.
You could try putting a prefilter on your vacuum. That may help with keeping the paper filter from getting clogged so quickly.
The Jacoci case is frigging phenomenal. I want 10 of them.
I always enjoy your videos, but that White Board bit just killed me today. Thanks for the laugh!
I feel this video so much. Ive made some of these exact mistake purchases
I hear ya about the grots and the sand, every time I touch paint to a mini I almost immediately want to quit and just build more... Really falling behind on the painting this way...
For the superglue accelerator, try spritzing the accelerator on one surface and glue on the other, then put them together.
Hobby purchases I love from this year: Cuttlefish Colors, Pro Acryl and Speed Paints 2.0 and game envy exemplar wet palette. Less impressed with Warcolours, too much messing about with it to get paint consistency right. Also, bought a beginners airbrush, guess I am not happy with it.. as I have yet to use it.. cant blame the product though.
I just saw a video for the H&S Ultra 2024 air brush and it looks really good.
For superglue, I get mine at Dollartree. They have a thick version, regular version, and a thin version and they're only a buck so if they dry up no biggie. For the toothpicks, I have a spice jar with holes so you only get one or two toothpicks at a time and it has a lid. For mini storage, I bought some Ikea metal office drawers, They're metal, stackable, and have six drawers for about $15. They are not big enough for some of the bigger minis though, each drawer is about 12 x 24 x 5 inches. At Hobby Lobby I found 1" square magnets that are chonky and make nice bases for Mordheim or the like.
Dropping hints for the holidays... I see you
I've got that same Lab Genius mixer. Got it a few months ago and it's absolutely fantastic. Pretty affordable all things considered. I've only had problems with it when it comes to crazy thick paint like Dirty Down Rust. That stuff requires something in it to mix it, but you should be using those for that kind of paint anyways. Do you need it? No. Will your arms thank you for using one when you're 50+? Most certainly. They're also just fun to use lol, so totally worth it.
There are some great tips in here. I might have to find a nice shot glass for my tooth picks.
You can contact her to fix your airbrush. I did that when my badger 200’s Teflon tube wore out (it’s a part you can’t replace yourself). They charge around $25 plus shipping, so it’s pretty reasonable. Keep in mind I did this back in 2012 😂
I use wooden toothpicks to scrape or push dirt off of work-in-progress paint models. The soft wood won't damage the plastic material without purposeful effort.
I am absolutely loving white ink.
Mix it with some speed paints and you instantly got a highlight color of that same speed paint. Its pretty sweet
That seems super smart! I want to try speedpaints for the tyranids in the leviathan box, seems like a neat way to use them and not have to buy too many colors
I feel like ultra thin superglue should have sponsored this video. 😂 love your videos, such enthusiasm and excitement about the hobby!
For superglue accelerant, using the applicator like a dropper, putting just one drop on one surface, superglue on the other, works wonders. I never spray it, it gets everywhere and stinks, but use a drop on the one side and superglue on the other and you avoid the fumes and you get pretty much instant curing, good enough to set down and move on to the next thing and great after 30 seconds or so.
I got a nail polish Shaker from Amazon for like $20. Does a pretty good job with some mixing balls in the bottle
I use one of those massage hammers as my paint mixer. Works just so damn well, because it really packs a punch AND I can use it to hammer my shoulders after painting 😂Way better than those more expensive paint shakers and more uses too, not to mention it's cheaper and much more powerful.
I love your list but I got one of those voxter mixers from Amazon, works great for me.
The absolute best hobby purchase I made this year was a 72" Kobalt workbench and six 16"x32" Wall Control metal pegboard panels. Totally leveled up my workspace.
Shout out to the Jucoci case. I have 2 of them 1 for my Tau army, 1 for my Salamanders. They are amazing!
Need a video on using an ultrasonic cleaner yips, what you can use with it. Like do you use it to strip models by the sounds of it is that using normal water?
For your brushes get the GW water cup. It’s so useful. It has ribs at the bottom to scrape off paint from you bristles while washing it in water. It has slots on its sides on the inside to rinse the water out the bristles and make a fine point again. And the top of the cup has notches to hold a brush or two when you need to set it down. I feel like people overlook exactly how useful the cup really is and think ohh it’s just a water cup. It’s such a great, cheap tool for fantastic brush maintenance. A must for paint brush users!
Had my hands in a sonic cleaner as it was running and it was fine(tickled) but would probably be bad on your ears lol
For instaset I've used superglue with instaset on a metal lathe to turn parts taking cuts 2.5mm deep(slow feed though on aluminum) and had to use a hammer to remove it
oh my god the point on that big ass brush is insane!? so sharp
Vortex mixer works well and just add stainless shakers in the paint and its a dream. Mixes everything properly, and far better than hand mixing. I bought one for 100 bucks in Aus and had 12 months so far out of it. So if it burns out, no big deal. for less than 10 bucks a month for good mixing, that is good enough value for me. lol
An ultrasonic cleaner works by creating cavitation sites at the surface of anything solid. The resultant mini-explosions literally blast the grime/paint off.
I think you need to try an aerosol can based accelerant instead. My hobby group swears by the Instant Bond Accelerator (available at hardware stores), and it works amazing. I use mine with both Gorilla Gel Super Glue, and the purple cap bsi ca glue.
Purple acrylic paint shifting series for metal effects was awesome,but glow series is very thin.
What are you thought on the Redgrass R9 desk lamp? I'm surprised you didn't pick that up this year. It cost a small fortune but it's amazing!! I'm really happy with it.
For accelerator, I put it into a dropper bottle (actually , an apothecary style bottle, with an actual squeeze dropper. Much more control.
Regarding the accelerator:
Im not really sure if we are talking about the same kind of glue but i have heard that you could also spritz some water on the glue to have it cure faster. Put your glue on the part, spritz some water on it and put both parts together. It should cure significantly faster.
Me and my friends have given the super glue accelerator the nick name "liquid headache" for the fumes it leaves after you use it.
Everyone commenting about how to use the accelerator is correct. 2 additions:
1) I built a little stand to store my accelerator in while the cap is loose because it's easy to knock over like the tall Nuln Oil bottles. Highly recommended.
2) the reaction between the two fluids is not 'instant,' if you are breaking the bond after use you need to give it a few seconds. Goobertown hobbies has a great video explaining the chemical functionality of CA glue and accelerators. If the lighting is right, you can see the wave of CA catalyze across an area touched with accelerant. Careful: this reaction is exothermic! You can burn your fingertips, it gets HOT!
That's funny, because I have the Onilab vortex mixer and it works fantastic for me. Did you add agitators to your paint?
Baking soda is by far the best accletrator for ca glue, also it builds up and fills gaps if you want it too
Super glue accelerator: I think you’re doing it wrong. The tech is to add superglue to one piece and pre-spray the point of contact that that super glue will be hitting. You are correct on one point: dat smell tho. I find a small fan works that out if I’m in a properly ventilated space.
Good boy JayJay! 🫶🍻
I really enjoyed this video. It was a really cool insight into how messy you are haha
Tell us more about these river rocks for mixing?!?!? also How do you go about adding water to your older paint?
Apply the CA accelerant with a toothpick from your shotglass on your desk. 😎
Jay for a good airbrush use the black needle and bec. For the 105 and you will be ok.
Best mixer is one of those pistol back massager
I use gel super glue. It dries slower so you can really get the pose right.
I use a ton of speed paint as a base. I feels like a vortex mixer would make my life way easier. Speed paint really sucks to shake up. Anyone else tried to shake up a bottle of Holy White? 🤣
It sucks! That's why I got a vortex mixer!
I added a metal mixing ball to all my xpress colour and that really sped up the mixing process.
Use a shop cloth over that filter. Cheap replacement.
You could probably fix the airbrush with a bit of beeswax to create the seal. Warm the wax in your fingers, put it on the nozzle rim and push the nozzle home.
i always had good results using insta set with bob smith industries super glue.
Vortex mixers are the best. Specifically for contrast paints, get rid of all that sediment build up.
Try baking soda as a superglue accelerator, either sprinkle on before applying the glue or use a pinch sprinkled after. Takes a bit of experimenting but it creates a super fast and strong bond.
Bill Making Stuff mixed baking soda and water in a spray bottle and said it worked well as an accelerator, but I don't know how long that lasts and how well it works 🤷
I don't know what to do about the super glue accelerant stink (though some brands are probably work better than others), but you should try spaying the kicker on one surface and gluing the other and THEN put them together. This should cause the kicker to touch more of the glue and accelerate the curing process across the entire surface.
Links to the products would be amazing! I'd love to get that paint stirrer that you say is actually good.
Dissolve about 1 teaspoon of Baking Soda, in about 1/2 cup of water in a spray bottle. Works the same as accelerator without the smell.
I still use my first paint mixer, Step 1 Buy a cheap Jigsaw ($10-20), step 2 buy a small vice grip from harbor freight ($2-10), depending on the connection between grip and jigsaw you can either connect the grip directly (old 1980s-2010 model) or you need to take a blade and connect it to the vice grip either with soldering of a ton of heavy duty take and epoxy.
Now you have an amazing paint shaker.
Technically you can also use your ultrasonic cleaner as a mixer instead of a vortex mixer. It will probably do a much better job too
look at a shop vac, at hardware store, fined a small one to put in the work space and blam no more problems... with the amount of work you do you need a shop-vac!!!!
Re the vortex mixer, I recommend a massage gun instead. They go on sale for cheap and mix the crap out of a bottle of paint. Plus u get a massage gun to boot.
A couple of super glue tips: super glue accelerator is literally just 70% isopropyl alcohol. Also vinegar will debon super glue so if you stick your fingers together you can soak in vinegar for 20 minutes and it will unglue them. Not the most convenient solution but it does work.
that Lab Genius mixer is great. Though, I'll admit, I find myself using it to massage my feet every now and then lol
grimaldus doesn't have any frens anymore. I like the chainaxes u had on your whiteboard. Very atmospheric.
And if you want finner airbrush you can use badgers renegate series.