DIGITAL DISPLAY TIME RELAY (Time Delay Relay Module)
ฝัง
- เผยแพร่เมื่อ 26 พ.ย. 2024
- A detailed explanation of the digital relay timer switch. This can be user for various application, for incubator, some other DIY projects and so on.
Model: Time Delay Relay
Timing range: 0-999s,0-999m,0-999h
Power supply voltage: AC 110V-220V
LED Display: Red + Blue Dual Display
Size: 79 x 26 x 43mm
Hole size: 72 x 40mm
Instructions:
1.After setting the data, you must wait 6 seconds,6s post modules automatically save memory set data.
2.Press SET key once to enter the time setting mode,the red LED flashes, press the key to increase or decrease the setting time T1.
3.After setting time T1,short press the SET key again, the green LED flashes,and the time is set by pressing the key Time T2, T2 time setting is completed,press SET key again, the system will automatically save the memory setting time or wait for 6s, 6s module will automatically save the data memory.
4.Long press SET,enter parameter setting mode.There are two sets of parameters for the user to select P0, P1.Short press SET in the current mode to switch between P0 and P1.
5.In P0 parameter can be set by pressing the key to adjust their own timing mode.In the P1 parameter can be set by adding and subtracting keys work mode.
P0--0:T1 Timing mode is second.
P0-1: T1 timing mode is minutes.
P0--2:T1 Timing Time mode is hour.
P1--0:Delay T1 time,relay pull(T1 timer)
P1--1:Relay release after T1 time delay (T1 timer)
P1--2:Delay T1 time,relay pull(T1 timer),and then relay release after T2 time delay(T2 timing),then it is finished.
P1--3:Relay release after T1 time delay(T1 timer),then delay T2 time,relay pull(T2 timing),then it is finished.
P1--4:Delay T1 time,relay pull(T1 timer),and then relay release after T2 time delay(T2 timer),cycling.
P1--5: Relay release after T1 time delay(T1 timer),then delay T2 time,relay pull(T2 timer),cycling.
Campfire by Scandinavianz / scandinavianz
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/_campfire
Music promoted by Audio Library • Campfire - Scandinavia...
Thank you for solving the 8th wonder of the world that is this menu system.
Super helpful when purchasing this. Even manufacturer doesn’t have such clear instructions. Beyond words!!!
Thanks for the useful video, I ordered this timer and your video helps me to use it easily.
Thank you a hundred times over. Your tutorial is outstanding and so easy to follow. Please keep it up and running!
You made it so easy to use…thanks!
Thanks for showing this.
I have an old bag sealer, impulse sealer they call it. The one that is foot operated and for some reason its electronics are bad, I replaced the potentiometer with a new one and it worked for a while but now its is bad again. Cant adjust the timing reliably, it would turn on permanently of very shortly.
Thinking about getting this one to replace the old stuff.
Great demonstration thanks, it's a nice thing. I don't see a 32kHz crystal though on the board, so not so sure it would keep good time in continuous running modes 4 and 5. I will try and find the spec. for it.
Thank you for your video. Exactly what I was looking for!!
Instructional video, thanks but, How do I do the wiring?
brilliant video - watched other videos on this device and was stumped I am using P1-0 , 4 second delay then turns on and stays on perfect for my needs
Many thanks for your tutorial. I've been trying to set mine up for hours as it came with no instructions
Thank you, now I understand how it works! Thank's!
Thank you for teaching me you are a great mentor.
Thenk you saheb.. very useful video
thank you now my pellet stove is running right again and I can control it.
Is there any possibility to turn the display off after setting parameters? Something like adding a new switch?
Bro 1 question, how to put the decimal point to the timer?
If power cut, timer will be saved or need to set again?
This vedio is very use full to me thank you
Most welcome 😊
Can the blue timer be set in seconds while red in minutes or is it sec-sec min-min hr-hr
Does anyone know how to trigger the start button remotely?
What voltage it might need?
This would be very useful so that the start button is wired (via a transformer) so that when the pump / light / etc is switched on in the normal way from the existing switch, it will run for say five minutes then turn off.
The unit should not be accessable to the user, hence the need for remote triggering.
Will the timer start when power is applied? For instance, in case of power loss, will the timer start when power is restored? Or do you need to press a button to start the timer after power loss?
It looks like the timer will restart automatically once the power is restored. = )
Very nice a video. Did you power it from an AC source?
So can i just hook up 220 from the dryer?
If it is less than the mentioned wattage
can i set the timer with 2 hours OFF and 9 seconds ON? it seems like we can't set the timing mode differently. planning to use this device on my egg turner in my incubator.
It has been said that you can! 🙂🌎✨
@@OJesusX3 yup.. didn't watch the full video. LOL
how is the output relay connection
Hi,
Is it possible with this timer too wait 12 hours power off and power on for 30 seconds ? Your demonstration don't present the possibility too have 2 differents configurations between the 2 timers (one in hours and one in seconds for example)
Thanks for your answer
M.
The time range setting of the two timers are independent of each other so....
Yes it does do this. And the time can be set for 999 seconds, 999 minutes, or 999 hours....
This can apply to either the on-time OR the off time.
12h ON / 30s OFF ..... YES.
@@REXXSEVEN Thanks RexxSeven! 🙂🌎✨
@@OJesusX3 You're welcome
I get that but how do you connect the wires
I want an incubator tray motor ro move in both directions. How do I do this?
You must make with 2 contactor first to move one direction second other way
@@gorandx many thaks for getting back to me
Can we set seconds in one timer and hrs in other timer in single program?
Unfortunately no. There might be newer products which might do it.
Thank you!!!!!!
I need this in a 12v model
Here it is, the 12 volt version....
Less expensive cost from China (slower delivery)
www.ebay.com/itm/401840610694
More expensive cost fom USA (faster delivery)
www.ebay.com/itm/153892017405
If it says that the listing is no longer available or the links are not valid then search for this on eBay or Google:
"DC12V 20A 1500W Digital Display Time Delay Relay Timing Timer Cycling Module Kit"
Let me know if this has helped you.
Can we set up time below 1s ? For example a timer for 0.2s ?
No
Sir can I use this is single phase motor
Yes I think so if it is less than 10Amps
Thank you!!!
Can we use for 12v
There are similar versions which work in 12V
hi guys, i am in india, how can i order this time ???
Can we set blue timer in seconds and red timer in hours or minutes at a time
Not tho timer dear
brother your video is very educative but i wan to know how to set it for turn it on for 5 SEC AND off for 8 Hr and on for another 5 SEC like that vise viser
First change the working mode to Minutes
for that Set the P0=1
Select the cycle timer option
For that Select P1-4
Then set the red display to 5 and blue to 8.
The output will be off for 5 minutes on for 8 minutes and the cycle continues.
Hope this helps
@@saijusam9130 SORRY I MADE A TYPING ERROR IT SHOULD BE ON FOR 5 SECOND AND OFF FOR 8 HOURS
@@yayajallow3346 Sorry. I don't think so
@@saijusam9130 goodnight sir , wonderful video , I have two questions (1) is it possible to have this timer turn on for five seconds once an hour to rotate a motor clockwise and then after another hour rotate the same motor anticlockwise ? ( Clockwise for five seconds and then anticlockwise for five seconds ) (2) I can't seem to find a wiring diagram for the device , can you pls assist ... thanks a million
Sir how to set 2 hrs off 5seconds on
I can program the timer but the relay does not switch on a 12v water pump. Do i have a faulty timer or am i wiring it wrong? 12v to battery, pump on other terminals.
You need a 12v + to s1 then s2 goes to your pump and the ground wire from your pump back to battery negative
Can the probe wires be extended?
Buying link please
a.aliexpress.com/_dViF0sN
get reset when power comes !!!....not hold the last value
Will this work ..I only want it on for 30 seconds every 24 hours is it possible to do
Sorry I dont think so...
You could join two together for this, one on a 12 hour on/off cycle which switches one on for 30 seconds only
yes it is possible. Chose P0 - 2 ( hours) and P1 - 5. set red timer 30 and blue 24.
Thx❤
What is the name of this timer relay ?
It doesn't have a brand or model number on it but I got the exact same one at this link, maybe you can use it to locate one near you. www.ebay.co.uk/itm/12V-110V-220V-LED-Dual-Display-Cycle-Timing-Delay-Timer-Relay-Module-0-999-Hours/283332677849
rate pls india
more videos pls senior pan sir mr. missuie
Price
15$
Hola
Call me
Zzzzzzz
You can cut it short, you have to be an Endian Professor😂