I heard Nova Mega were the shit, but never seen them run till now. Very impressive engine. Now i want one !! Lol I have 2 that need service... a .21 and a .15. Want to send em off now. Great car man !
Thanks Brother, yea I got the .21 that's Branded serpent that came on My Vector, but it didn't have a head button ,it took me forever to find on that fit and I just got a Picco one to work I believe so I'm going to put back in Vector now
That car port can be a magnet lol. Be careful with her 😅 I’m sure it’s hard to keep traction with the cold temp. Bring her back out in the spring for fresh speed run attempt - Stay warm and thanks for the vid 🩷
Posted the gear part numbers twice, this is the 3rd. F'n K035, K036, K037 are your #'s for the Pinions from Team Solar at the C shop, and VS007, VS009B from RCmart.
The 3.0 Starter box is exactly the same as the 2.0, except they added Dean's T plugs instead of using the Tamiya Type battery connector. Other than that, it's the same box (I have both). If you can find the old Hobbico MiicroPanel Plus HCAP0301 Minio Power Panel, it fits in the pre-punched Cutout near the handle, and you can use a larger battery and use a pigtail glow driver (and not worry about dead glow driver). It also charges a NiCad Glow Driver too.
BTW, on the FW06, f you want to add the High Gear set, you have to change the spurs to the optional smaller spurs, AND, change the pinions to the optional larger pinion, to keep the mesh correct.
@@RuggedRc That's the "Right" way to change gear ratio. Or, you could just change the spurs, and slot the chassis to adjust the mesh. But, then by doing that way, you will only increase the gear ratio 1/2 way. It gets a little spendy to change both the spurs and pinions. But hey, it's a hobby (which isn't cheap). If you want to do more, the Centax Clutch for SG shaft is worth the upgrade. The Coronashop is priced in HKD, so you will have to do a conversion to USD. I've bought from both places, to feed the RC addiction. For the FW06, Coronashop Solar sells Alum Center Shaft, and Alum Drive Hubs to get rid of those plastic parts, plus, pick up a set of Low Profile Motor mounts, if you want to change out that Kyosho Pull Start in the future.
I heard Nova Mega were the shit, but never seen them run till now. Very impressive engine. Now i want one !! Lol
I have 2 that need service... a .21 and a .15. Want to send em off now. Great car man !
Thanks Brother, yea I got the .21 that's Branded serpent that came on My Vector, but it didn't have a head button ,it took me forever to find on that fit and I just got a Picco one to work I believe so I'm going to put back in Vector now
That car port can be a magnet lol. Be careful with her 😅 I’m sure it’s hard to keep traction with the cold temp. Bring her back out in the spring for fresh speed run attempt
- Stay warm and thanks for the vid 🩷
Yea I probly won't do another speed run here Lol, Thanks for Watching and talkin
Posted the gear part numbers twice, this is the 3rd. F'n K035, K036, K037 are your #'s for the Pinions from Team Solar at the C shop, and VS007, VS009B from RCmart.
Awesome 👍
Very nice🤙
Thanks ✌
The 3.0 Starter box is exactly the same as the 2.0, except they added Dean's T plugs instead of using the Tamiya Type battery connector. Other than that, it's the same box (I have both). If you can find the old Hobbico MiicroPanel Plus HCAP0301 Minio Power Panel, it fits in the pre-punched Cutout near the handle, and you can use a larger battery and use a pigtail glow driver (and not worry about dead glow driver). It also charges a NiCad Glow Driver too.
Oh Okay
BTW, on the FW06, f you want to add the High Gear set, you have to change the spurs to the optional smaller spurs, AND, change the pinions to the optional larger pinion, to keep the mesh correct.
Where can I get the high gears?
@@RuggedRc That's the "Right" way to change gear ratio. Or, you could just change the spurs, and slot the chassis to adjust the mesh. But, then by doing that way, you will only increase the gear ratio 1/2 way. It gets a little spendy to change both the spurs and pinions. But hey, it's a hobby (which isn't cheap). If you want to do more, the Centax Clutch for SG shaft is worth the upgrade. The Coronashop is priced in HKD, so you will have to do a conversion to USD. I've bought from both places, to feed the RC addiction. For the FW06, Coronashop Solar sells Alum Center Shaft, and Alum Drive Hubs to get rid of those plastic parts, plus, pick up a set of Low Profile Motor mounts, if you want to change out that Kyosho Pull Start in the future.
@@red7fifty I took .15 out and got Novarossi mito .12 in my FW06 now
@@RuggedRc I posted the part numbers and links multiple times, but the name won't be allowed to post by TH-cam.
The "C" shop, is spelled like the word from the 2020 event, that shares the name of a Mexican beer.
Appreciate it
Oh Damn, you hit the car port AGAIN!?
I know 😂😂😊
@@RuggedRc Put a Sofa Cushion on the Car Port pole next time you go out! LOL
I keep posting the part numbers for the gears, then the post disappears.
TH-cam Ghosting
Ok thanks
Some thin double side tape will hold your foam on your TX
Thanx
@@RuggedRc Or, a thin smear of glue
That hit could have been worse thank the RC gods as OG would say
I know right 👍